mountFS adds these strings to fstab and then relies on `mount` parsing fstab. If
they have spaces or tabs in them, that would break fstab and therefore not mount
with the unhelpful error: No such file or directory.
Co-authored-by: Lily Foster <lily@lily.flowers>
Co-authored-by: Luflosi <Luflosi@users.noreply.github.com>
Systemd 250:
> DHCPv4 client support in systemd-networkd learnt a new Label= option
> for configuring the address label to apply to configure IPv4
> addresses.
> The [IPv6AcceptRA] section of .network files gained support for a new
> UseMTU= setting that may be used to control whether to apply the
> announced MTU settings to the local interface.
> The [DHCPv4] section in .network file gained a new Use6RD= boolean
> setting to control whether the DHCPv4 client request and process the
> DHCP 6RD option.
> The [DHCPv6] section in .network file gained a new setting
> UseDelegatedPrefix= to control whether the delegated prefixes will be
> propagated to the downstream interfaces.
> The [IPv6AcceptRA] section of .network files now understands two new
> settings UseGateway=/UseRoutePrefix= for explicitly configuring
> whether to use the relevant fields from the IPv6 Router Advertisement
> records.
> The [RoutingPolicyRule] section of .network file gained a new
> SuppressInterfaceGroup= setting.
> The IgnoreCarrierLoss= setting in the [Network] section of .network
> files now allows a duration to be specified, controlling how long to
> wait before reacting to carrier loss.
Systemd 246:
> systemd-networkd's [DHCPv4] section gained a new setting UseGateway=
> which may be used to turn off use of the gateway information provided
> by the DHCP lease. A new FallbackLeaseLifetimeSec= setting may be
> used to configure how to process leases that lack a lifetime option.
> The IPv6Token= section in the [Network] section is deprecated, and
>> the [IPv6AcceptRA] section gained the Token= setting for its
>> replacement. The [IPv6Prefix] section also gained the Token= setting.
>> The Token= setting gained 'eui64' mode to explicitly configure an
>> address with the EUI64 algorithm based on the interface MAC address.
>> The 'prefixstable' mode can now optionally take a secret key. The
>> Token= setting in the [DHCPPrefixDelegation] section now supports all
>> algorithms supported by the same settings in the other sections.
* Remove `ForceDHCPv6PDOtherInformation=`
* Add a missing `WithoutRA=` option
Systemd 250:
> The ForceDHCPv6PDOtherInformation= setting in the [DHCPv6] section
> has been removed. Please use the WithoutRA= and UseDelegatedPrefix=
> settings in the [DHCPv6] section and the DHCPv6Client= setting in the
> [IPv6AcceptRA] section to control when the DHCPv6 client is started
> and how the delegated prefixes are handled by the DHCPv6 client.
Adapt to changes introduced in Systemd 250:
> The [DHCPv6PrefixDelegation] section in .network file is renamed to
> [DHCPPrefixDelegation], as now the prefix delegation is also
> supported with DHCPv4 protocol by enabling the Use6RD= setting.
Replaces the `dhcpV6PrefixDelegationConfig` with
`dhcpPrefixDelegationConfig` and throws an error if the old option is
used.
Also adapt the respective IPv6 prefix delegation test.
Before this patch, the entry match condition always fails, causing all
entries being removed. The error is not noticed because later they are
re-generated.
Before this patch, the gen_number found by regex contains
"-specialisation-foo" if specialisation is used. As a result, applying
int() to gen_number raises ValueError, causing entries containing
a specialisation part not being removed.
most of these are hidden because they're either part of a submodule that
doesn't have its type rendered (eg because the submodule type is used in
an either type) or because they are explicitly hidden. some of them are
merely hidden from nix-doc-munge by how their option is put together.
conversions were done using https://github.com/pennae/nix-doc-munge
using (probably) rev f34e145 running
nix-doc-munge nixos/**/*.nix
nix-doc-munge --import nixos/**/*.nix
the tool ensures that only changes that could affect the generated
manual *but don't* are committed, other changes require manual review
and are discarded.
mostly no rendering changes. some lists (like simplelist) don't have an
exact translation to markdown, so we use a comma-separated list of
literals instead.
most of the screen tags used in option docs are actually listings of
some sort. nsd had a notable exception where its screen usage was pretty
much a raw markdown block that made most sense to convert into docbook lists.
the way these are written they introduce lots of whitespace in each
line, which will cause those lines to render as code when converted to
markdown. override the whole description instead.
commit 0507725061 ("setup-hooks/strip.sh: run RANLIB on static
archives after stripping") added an extra argument to `stripDirs()`
helper.
I did not realize it's used outside the strip hook itself. Restore
stripping by passing $RANLIB as a new argument.
now nix-doc-munge will not introduce whitespace changes when it replaces
manpage references with the MD equivalent.
no change to the manpage, changes to the HTML manual are whitespace only.
Call dbus by using `$cur_systemd/busctl --json=...` and core modules
JSON::PP and IPC::Cmd to slim down dependencies for baseSystem.
perlPackages.NetDBus pulls in quite a few other dependencies, like
XML::Twig, LWP, and HTTP::Daemon. These are not really neccecary for
s-t-c, and some of them have caused issues particularly with cross
builds after updates to perlPackages.
make (almost) all links appear on only a single line, with no
unnecessary whitespace, using double quotes for attributes. this lets us
automatically convert them to markdown easily.
the few remaining links are extremely long link in a gnome module, we'll
come back to those at a later date.
we can't embed syntactic annotations of this kind in markdown code
blocks without yet another extension. replaceable is rare enough to make
this not much worth it, so we'll go with «thing» instead. the module
system already uses this format for its placeholder names in attrsOf
paths.
our xslt already replaces double line breaks with a paragraph close and
reopen. not using explicit para tags lets nix-doc-munge convert more
descriptions losslessly.
only whitespace changes to generated documents, except for two
strongswan options gaining paragraph two breaks they arguably should've
had anyway.
Now the tool will only strip binaries if a strip executable is passed
via the STRIP environment variable. This is exposed via the strip
option for makeInitrdNG and the NixOS option boot.initrd.systemd.strip.
The systemd-coredump module required systemd to be built with
withCoredump=true, even if the module was disabled.
- allow systemd to be missing systemd-coredump if the module is disabled
- switch to mkDefault for the sysctl config to allow user overrides when
the module is disabled
- add nixos tests for both the enabled and disabled cases
the conversion procedure is simple:
- find all things that look like options, ie calls to either `mkOption`
or `lib.mkOption` that take an attrset. remember the attrset as the
option
- for all options, find a `description` attribute who's value is not a
call to `mdDoc` or `lib.mdDoc`
- textually convert the entire value of the attribute to MD with a few
simple regexes (the set from mdize-module.sh)
- if the change produced a change in the manual output, discard
- if the change kept the manual unchanged, add some text to the
description to make sure we've actually found an option. if the
manual changes this time, keep the converted description
this procedure converts 80% of nixos options to markdown. around 2000
options remain to be inspected, but most of those fail the "does not
change the manual output check": currently the MD conversion process
does not faithfully convert docbook tags like <code> and <package>, so
any option using such tags will not be converted at all.
The ConditionFileNotEmpty override patch wasn't correct for stage1, which
does have the modules in /lib. So, remove the patch and set
the right path with overrides in the final system.
Also, make sure systemd-tmpfiles-setup-dev is pulled in to create
all the necessary symlinks.
Some plymouth themes use assets of others, like is the case with our
default bgrt depending on spinner. Missing assets would cause the
splashscreen to not render at all in stage 1.
Preliminary dependency resolution code seemed to be broken, and this
should fix it.
Only direct dependencies of selected theme are pulled in.
`boot.initrd.systemd.emergencyAccess` expects passwd(5) formatted
strings, hence `singleLineStr` is too broad.
Use the same type as `users.users.*.hashedPassword` to ensure
consistency across all options where password hashes are used.
From `modules/config/users-groups.nix`:
```
hashedPassword = mkOption {
type = with types; nullOr (passwdEntry str);
...
};
```
Handling of the string length condition in should_update
was broken, as evident with the log message
> leaving systemd-boot 246 in place (250.4 is not newer)
Discussion with @mweinelt came to the conclusion
that Python's "<" operator already does what we need,
so the should_update function can be dropped.
Fixes a30de3b849
Since, 4ddc78818e systemd-boot-builder
is broken in two ways:
* if no systemd-boot is currently installed *and* the NIXOS_INSTALL_BOOTLOADER
env variable is not set, it will try to run "bootctl update", which will fail
* if the currently installed systemd-boot version is newer than the version
we're about to install, it will also try to run "bootctl update", which will fail
This patch changes the behaviour,
* for the first case to still fail, but not even bother to try running
"bootctl update" and instead erroring out with an exception
* for the second case to leave the newer version in place, restoring
the pre - 4ddc78818e behaviour
To do the proper version check a new "should_update" helper function was introduced,
mimicing the compare_product C function from bootctl. If the following systemd
issue gets resolved, we would have a nice way to get rid of this function:
> https://github.com/systemd/systemd/issues/23450
This change allows to again switch to a different NixOS configuration which contains
an older systemd-boot.
Co-authored-by: Martin Weinelt <mweinelt@users.noreply.github.com>
`extra-utils` composes the set of programs and libraries needed by
1. copying over all programs
2. copying over all libraries any program directly links against
3. set the runtime path for every program to the library directory
It seems that this approach misses the case where a library itself links
against another library. That is to say, `extra-utils` assumes that
either only progams link against libraries or that every library linked
to by a library is already linked to by a program.
`mount.zfs` linking against `libcrypto`, in turn linking against `libdl`
shows how the current approach falls short:
```
$ objdump -p $(which mount.zfs) | grep NEEDED | grep -e libdl -e libcrypto
NEEDED libcrypto.so.1.1
$ ldd (which mount.zfs) | grep libdl
libdl.so.2 => /nix/store/ybkkrhdwdj227kr20vk8qnzqnmj7a06x-glibc-2.34-115/lib/libdl.so.2 (0x00007f9967a9a000
```
Using `mount.zfs` directly in stage 1 init still works since
`LD_LIBRARY_PATH` overrides this (as intended).
util-linux's `mount` however executes `mount.zfs` with LD_LIBRARY_PATH
removed from its environment as can be seen with strace(1) in an
interactive stage 1 init shell (`boot.shell_on_fail` kernel parameter):
```
# env -i LD_LIBRARY_PATH=$LD_LIBRARY_PATH $(which strace) -ff -e trace=/exec -v -qqq $(which mount) /mnt-root
execve("/nix/store/3gqbb3swgiy749fxd5a4k6kirkr2jr9n-extra-utils/bin/mount", ["/nix/store/3gqbb3swgiy749fxd5a4k"..., "/mnt-root"], ["LD_LIBRARY_PATH=/nix/store/3gqbb"...]) = 0
[pid 1026] execve("/sbin/mount.zfs", ["/sbin/mount.zfs", "<redacted>", "/mnt-root", "-o", "rw,zfsutil"], []) = 0
/sbin/mount.zfs: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
--- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=1026, si_uid=0, si_status=127, si_utime=0, si_stime=0} ---
```
env(1) is used for clarity (hence subshells for absoloute paths).
While `mount` uses the right library path, `mount.zfs` is stripped of
it, so ld.so(8) fails resolve `libdl` (as required by `libcrypto`).
To fix this and not rely on `LD_LIBRARY_PATH` to be set, fix the library
path inside libraries as well.
This finally mounts all ZFS filesystems using `zfsutil` with correct and
intended mount options.
At least pkgs/os-specific/linux/util-linux/default.nix uses
```
"--enable-fs-paths-default=/run/wrappers/bin:/run/current-system/sw/bin:/sbin"
```
which does not cover stage 1 init's PATH as all executables are put
under /bin/.
Fix util-linux's `mount` usage by symlinking /sbin to it.
Consider ZFS filesystems meant to be mounted with zfs.mount(8), e.g.
```
config.fileSystems."/media".options = [ "zfsutil" ];
config.fileSystems."/nix".options = [ "zfsutil" ];
```
`zfsutil` uses dataset properties as mount options such that zfsprops(7)
do not have to be duplicated in fstab(5) entries or manual mount(8)
invocations.
Given the example configuation above, /media is correctly mounted with
`setuid=off` translated into `nosuid`:
```
$ zfs get -Ho value setuid /media
off
$ findmnt -t zfs -no options /media
rw,nosuid,nodev,noexec,noatime,xattr,posixacl
```
/nix however was mounted with default mount(8) options:
```
$ zfs get -Ho value setuid /nix
off
$ findmnt -t zfs -no options /nix
rw,relatime,xattr,noacl
```
This holds true for all other ZFS properties/mount options, including
`exec/[no]exec`, `devices/[no]dev`, `atime/[no]atime`, etc.
/nix is mounted using BusyBox's `mount` during stage 1 init while /media
is mounted later using proper systemd and/or util-linux's `mount`.
Tracing stage 1 init showed that BusyBox never tried to execute
mount.zfs(8) as intended by `zfsutil`.
Replacing it with util-linux's `mount` and adding the mount helper
showed attempts to execute mount.zfs(8).
Ensure ZFS filesystems are mounted with correct options iff `zfsutil` is
used.
Account for all `with*` options causing their respective unit files to
not be built, just like the current code `withCryptsetup` already does.
This fixes build errors like the following:
```
missing /nix/store/5fafsfms64fn3ywv274ky7arhm9yq2if-systemd-250.4/example/systemd/system/systemd-importd.service
error: builder for '/nix/store/67rdli5q5akzwmqgf8q0a1yp76jgr0px-system-units.drv' failed with exit code 1
```
Found by using a customised systemd package as follows:
```
systemd.package = pkgs.systemd-small;
nixpkgs.config.packageOverrides = pkgs: {
"systemd-small" = pkgs.systemd.override {
withImportd = false;
withMachined = false;
...
};
};
```
These two packages don't have a lib/firmware directory, so putting
them in hardware.firmware has no effect. This will become a hard
error once firmware compression is implemented.
(In the case of Linux, the firmware was all moved to linux-firmware.)
This special case for Btrfs was added in 51bc82960a. One year later beddd36c95 added code to skip the fsck entirely if the filesystem is Btrfs. This made the `if` statement unnecessary.
People running nixos-install in non-NixOS environments
occasionally run into the mktemp builtin not being loaded
into bash (yes, even NixOS' bash). Rather than try and
figure out why exactly that is happening, just use a known
good mktemp from coreutils.
We can make the growfs and makefs binaries conditional because we know
if we'll need them. Also move the cryptsetup generator to the luksroot
so it's not included when not needed.
We drop some generators altogether: systemd-getty-generator because we
don't have getty anyway in stage 1, systemd-system-update-generator
because we don't use that logic in NixOS and
systemd-veritysetup-generator because stage 1 has no veritysetup support
(yet) and if it had, we still wouldn't want to include the generator
unconditionally.
cpio includes the number of directory hard links in archives it creates.
Some filesystems, like btrfs, do not count directory hard links the same
way as more common filesystems like ext4 or tmpfs, so archives built
when /tmp is on such a filesystem do not reproduce. This patch replaces
cpio with bsdtar, which does not have this issue. The specific
invocation is from this page:
https://reproducible-builds.org/docs/archives/
It's already defined in `systemd/user.nix`.
This is a leftover from commit b6d50528dd
where all `systemd.user` settings were moved to `systemd/user.nix`.
- Fix the name of the env
- Add the correct kmod to the initrd
- Add `less` to make journalctl usable
- Fix SYSTEMD_SULOGIN_FORCe for rescue.target
- Add some missing binaries
The networkd.conf file controls a variety of interesting settings
which don't seem to be configurable at the moment, including
adding names to route tables (for networkd only, although this commit
also exports them into iproute2 for convenience's sake), and
the speed metering functionality built into networkd.
Importantly, however, this also allows disabling the systemd
functionality where it likes to delete all the routes and routing rules
that haven't been configured through networkd whenever something causes
it to perform a reconfiguration.
As requested by @roberth, we now have an option similar to
environment.etc. There's also extra store paths to copy and a way to
suppress store paths to make customizations possible.
We also link mount and umount to /bin to make recovery easier when
something fails
using freeform is the new standard way of using modules and should replace
extraConfig.
In particular, this will allow us to place a condition on mails
This accomplishes multiple things:
- Allows us to start systemd without stage-2-init.sh. This was not
possible before because the environment would have been wrong
- `systemctl daemon-reexec` also changes the environment, giving us
newer tools for the fs packages
- Starts systemd in a fully clean environment, making everything more
consistent and pure
At some point, I'd like to make another attempt at
71f1f4884b ("openssl: stop static binaries referencing libs"), which
was reverted in 195c7da07d. One problem with my previous attempt is
that I moved OpenSSL's libraries to a lib output, but many dependent
packages were hardcoding the out output as the location of the
libraries. This patch fixes every such case I could find in the tree.
It won't have any effect immediately, but will mean these packages
will automatically use an OpenSSL lib output if it is reintroduced in
future.
This patch should cause very few rebuilds, because it shouldn't make
any change at all to most packages I'm touching. The few rebuilds
that are introduced come from when I've changed a package builder not
to use variable names like openssl.out in scripts / substitution
patterns, which would be confusing since they don't hardcode the
output any more.
I started by making the following global replacements:
${pkgs.openssl.out}/lib -> ${lib.getLib pkgs.openssl}/lib
${openssl.out}/lib -> ${lib.getLib openssl}/lib
Then I removed the ".out" suffix when part of the argument to
lib.makeLibraryPath, since that function uses lib.getLib internally.
Then I fixed up cases where openssl was part of the -L flag to the
compiler/linker, since that unambigously is referring to libraries.
Then I manually investigated and fixed the following packages:
- pycurl
- citrix-workspace
- ppp
- wraith
- unbound
- gambit
- acl2
I'm reasonably confindent in my fixes for all of them.
For acl2, since the openssl library paths are manually provided above
anyway, I don't think openssl is required separately as a build input
at all. Removing it doesn't make a difference to the output size, the
file list, or the closure.
I've tested evaluation with the OfBorg meta checks, to protect against
introducing evaluation failures.
We can perform most of the mkdir/ln/rm using systemd-tmpfiles
instead which cleans up the script.
/bin and /home are created by their activation script snippets
usbfs is deprecated and unused.
hwclock seems to be automatically executed by systemd on startup.
The mkswap to prevent hibernation cycles seems to be executed by systemd
as well since the provided regression tests succeeds.
Currently it is only possible to add upstream _system_ units. The option
systemd.additionalUpstreamSystemUnits can be used for this.
However, this was not yet possible for systemd.user. In a similar
fashion this was added to systemd-user.nix.
This is intended to have other modules add upstream units.
Use a quoted heredoc to inject installBootLoader safely into the script,
and restore the previous invocation of `system` with a single argument so
that shell commands keep working.
As of systemd/systemd@e908434458,
systemd-networkd now automatically configures routes to addresses
specified in AllowedIPs unless explicitly disabled with
"RouteTable=off".
This bug is so obscure and unlikely that I was honestly not able to
properly write a test for it. What happens is that we are calling
handleModifiedUnit() with $unitsToStart=\%unitsToRestart. We do this to
make sure that the unit is stopped before it's started again which is
not possible by regular means because the stop phase is already done
when calling the activation script.
recordUnit() still gets $startListFile, however which is the wrong file.
The bug would be triggered if an activation script requests a service
restart for a service that has `stopIfChanged = true` and
switch-to-configuration is killed before the restart phase was run. If
the script is run again, but the activation script is not requesting
more restarts, the unit would be started instead of restarted.
When initializing a system (e.g. first boot / livecd) we have no good
reference source for time. systemd-timesyncd however would revert back
to its configured fallback time (in our case 01.01.1980). Since we
probably don't want to hardcode a specific date as fallback we are now
using the current system time (wherever that might have come from) to
initialize the reference clock file.
The only systems that might be remotely affected by this change are
machines that have highly unreliable RTCs or those where the battery
that backs the RTC is running empty.
Historically these systems always had a tough time with anything time
related and likely required manual intervention.
For stateless systems (those that wipe / between reboots or our
installer CDs) this has the consequence that time will always be reset
to whatever the system comes up with on boot. This is likely the correct
time coming from an RTC. No harm done here the situation is likely
unchanged for them.
For stateful systems (those that retain the / partition across reboots)
there shouldn't be a change at all. They'll provide an initial clock
value once on their lifetime (during first boot / after installation).
From then onwards systemd-timesyncd will update the file with the newer
fallback time (that will be picked up on the next boot).
This effectively fixes the majority of all VM tests which were broken
because `/dev/vda` (or any other block device) wasn't mountable:
machine # mounting /dev/vda on /...
machine # mount: mounting /dev/vda on /mnt-root/ failed: No such device[ 2.820976] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100
machine # [ 2.821757] CPU: 0 PID: 1 Comm: init Not tainted 5.10.72 #1-NixOS
machine # [ 2.821757] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
machine # [ 2.821757] Call Trace:
machine # [ 2.821757] dump_stack+0x6b/0x83
machine # [ 2.821757] panic+0x101/0x2c8
machine # [ 2.821757] do_exit.cold+0x14/0xb3
machine # [ 2.821757] do_group_exit+0x33/0xa0
machine # [ 2.821757] __x64_sys_exit_group+0x14/0x20
machine # [ 2.821757] do_syscall_64+0x33/0x40
machine # [ 2.821757] entry_SYSCALL_64_after_hwframe+0x44/0xa9
machine # [ 2.821757] RIP: 0033:0x7f67ec2800f6
machine # [ 2.821757] Code: 00 4c 8b 0d 2c 5d 11 00 eb 19 66 2e 0f 1f 84 00 00 00 00 00 89 d7 89 f0 0f 05 48 3d 00 f0 ff ff 77 22 f4 89 d7 44 89 c0 0f 05 <48> 3d 00 f0 ff ff 76 e2 f7 d8 64 41 89 01 eb da 66 2e 0f 1f 84 00
machine # [ 2.821757] RSP: 002b:00007fff8f5a71d8 EFLAGS: 00000202 ORIG_RAX: 00000000000000e7
machine # [ 2.821757] RAX: ffffffffffffffda RBX: 0000000000699704 RCX: 00007f67ec2800f6
machine # [ 2.821757] RDX: 0000000000000001 RSI: 000000000000003c RDI: 0000000000000001
machine # [ 2.821757] RBP: 0000000000000004 R08: 00000000000000e7 R09: ffffffffffffff80
machine # [ 2.821757] R10: 00007f67ec33f3e0 R11: 0000000000000202 R12: 000000000000000b
machine # [ 2.821757] R13: 00007fff8f5a75a8 R14: 0000000000000000 R15: 00000000004fc198
machine # [ 2.821757] Kernel Offset: 0x31e00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
machine # [ 2.821757] Rebooting in 1 seconds..
This happened because the kernel failed to load modules such as `ext4`
from `boot.initrd.availableKernelModules`[1] on e.g. a `mount(2)` syscall.
The problem is that `kmod` isn't linked against `libpthread.so.0`
anymore because it got merged into `libc.so.6` (however, the .so still
exists), but still needs it:
machine # newfstatat(AT_FDCWD, "/nix/store/eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee-glibc-2.34-36/lib/x86_64", 0x7ffd951114c0, 0) = -1 ENOENT (No such file or directory)
machine # openat(AT_FDCWD, "/nix/store/eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee-glibc-2.34-36/lib/x86_64/libpthread.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
machine # newfstatat(AT_FDCWD, "/nix/store/eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee-glibc-2.34-36/lib/x86_64", 0x7ffd951114c0, 0) = -1 ENOENT (No such file or directory)
machine # openat(AT_FDCWD, "/nix/store/eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee-glibc-2.34-36/lib/libpthread.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
machine # newfstatat(AT_FDCWD, "/nix/store/eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee-glibc-2.34-36/lib", 0x7ffd951114c0, 0) = -1 ENOENT (No such file or directory)
machine # openat(AT_FDCWD, "/nix/store/eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee-glibc-2.34-36/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
machine # writev(2, [{iov_base="/nix/store/kdc9n48ksdc1a8y8w512w"..., iov_len=69}, {iov_base=": ", iov_len=2}, {iov_base="error while loading shared libra"..., iov_len=36}, {iov_base=": ", iov_len=2}, {iov_base="libpthread.so.0", iov_len=15}, {iov_base=": ", iov_len=2}, {iov_base="cy
machine # ) = 184
machine # exit_group(127) = ?
machine # +++ exited with 127 +++
machine # mount: mounting /dev/vda on /mnt-root/ failed: No such device
machine # [ 19.167180] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100
machine # [ 19.167711] CPU: 0 PID: 1 Comm: init Not tainted 5.10.72 #1-NixOS
This is not a problem
* inside stage-1 because `LD_LIBRARY_PATH` points to `$out/lib` of
extra-utils where `libpthread.so.6` also exists.
* on a running system because `${pkgs.glibc}/lib` is part of kmod's
rpath.
However this is a problem inside the kernel which calls `modprobe` (in
our case `kmod`) to load modules and doesn't know about
`LD_LIBRARY_PATH`. Also, the rpath-reference was nuked.
To work around this, the kernel's `modprobe`
(i.e. `/proc/sys/kernel/modprobe`) now points to a wrapper which
explicitly declares `LD_LIBRARY_PATH`. We can't use `makeWrapper` here
because `modprobe` itself must not be renamed. Otherwise, `kmod` (which
is the link-target of `modprobe`) won't work because it expects
`argv[0] == "modprobe"` to perform modprobe's tasks.
[1] https://nixos.org/manual/nixos/stable/options.html#opt-boot.initrd.availableKernelModules
systemd needs this so special characters (like the ones in wireguard
units that appear because they are part of base64) can be escaped using
the \x syntax.
Root of the issue is that `glob()` handles the backslash internally
which is obviously not what we want here.
Also add a test case and fix some perlcritic issues in the subroutine.
wtmp and btmp are created by systemd, so the rules are more appropriate there.
They can be disabled explicitly with something like
services.ogrotate.paths = {
"/var/log/btmp".enable = false;
"/var/log/wtmp".enable = false;
};
if required.
