The `platform` field is pointless nesting: it's just stuff that happens
to be defined together, and that should be an implementation detail.
This instead makes `linux-kernel` and `gcc` top level fields in platform
configs. They join `rustc` there [all are optional], which was put there
and not in `platform` in anticipation of a change like this.
`linux-kernel.arch` in particular also becomes `linuxArch`, to match the
other `*Arch`es.
The next step after is this to combine the *specific* machines from
`lib.systems.platforms` with `lib.systems.examples`, keeping just the
"multiplatform" ones for defaulting.
This is a temporary fix for #97433. A more proper fix has been
implemented upstream in systemd/systemd#17001, however until it gets
backported, we are stuck with ignoring the error.
After the backport lands, this commit should be reverted.
For UEFI setups, "device" will generally be the special value "nodev"
which represents not running grub-install at all. Using "nodev" for
boot mirrors should therefore be allowed.
The commit enforces buildPackages in the builder but neglects
the fact that the builder is intended to run on the target system.
Because of that, the builder will fail when remotely building a
configuration eg. with nixops or nix-copy-closure.
This reverts commit a6ac6d00f9.
Fixes error
Can't use an undefined value as an ARRAY reference at /nix/store/...-install-grub.pl line 642, <FILE> line 5.
with `/boot/grub/state` being:
```
grub
2.04
no
/dev/sda
/boot
```
I am not sure where the trailing empty line can come from; the script does not
seem to write it. In any case, now we handle that situation as well.
Further, ensure that `extraGrubInstallArgs` defaults to the empty array
if its key is not present in the `jsonState`.
For example, turns the error
cannot copy /nix/store/g24xsmmsz46hzi6whv7qwwn17myn3jfq-grub-2.04/share/grub/unicode.pf2 to /boot
into the more useful
cannot copy /nix/store/g24xsmmsz46hzi6whv7qwwn17myn3jfq-grub-2.04/share/grub/unicode.pf2 to /boot: Read-only file system
Useful for when you need to build grub modules into your grub kernel
to get a working boot, as shown in the added example.
To store this new value, we switch to more structural JSON approach.
Using one line per value to store in `/boot/grub/state` gets really messy when
the values are arrays, or even worse, can contain newlines (escaping would be
needed). Further, removing a value from the file would get extra messy
(empty lines we'd have to keep for backwards compatibility).
Thus, from now on we use JSON to store all values we'll need in the future.
This can be used to explicitly specify a specific dtb file, relative to
the dtb base.
Update the generic-extlinux-compatible module to make use of this option.
Some bootloaders might not properly detect the model.
If the specific model is known by configuration, provide a way to
explicitly point to a specific dtb in the extlinux.conf.
This option exposes the builder command used to populate an image,
honoring all options except the -c <path-to-default-configuration>
argument.
Useful to have for sdImage.populateRootCommands.
Special care needs to be taken w.r.t cross - the populate command runs
on the host platform, the activation script on the build platform (so
the builders differ)
The way this ends up being called with the raspberry pi 4 image builder
ends up not using the `-e` from the shebang.
In turn, the builds fails during cross-compilation. The wrong coreutils
ends up being used, but this is not made apparent.
The issue I faced is already fixed on master, but this ensures no one
ends up with a failed build "succeeding".
Memtest86+ doesn't support EFI, so unfree Memtest86 is used when EFI
support is enabled (systemd-boot currently also uses Memtest86 when
memtest is enabled).
A centralized list for these renames is not good because:
- It breaks disabledModules for modules that have a rename defined
- Adding/removing renames for a module means having to find them in the
central file
- Merge conflicts due to multiple people editing the central file
Add support for custom device-tree files, and applying overlays to them.
This is useful for supporting non-discoverable hardware, such as sensors
attached to GPIO pins on a Raspberry Pi.
Although double '/' in paths is not a problem for GRUB supplied with nixpkgs, sometimes NixOS's grub.conf read by external GRUB and there are versions of GRUB which fail
The background color option is self-explanatory.
The mode is either `normal` or `stretch`, they are as defined by GRUB,
where normal will put the image in the top-left corner of the menu, and
stretch is the default, where it stretches the image without
consideration for the aspect ratio.
* https://www.gnu.org/software/grub/manual/grub/grub.html#background_005fimage
This fixes an issue where setting both
`boot.loader.systemd-boot.editor` to `false` and
`boot.loader.systemd-boot.consoleMode` to any value would concatenate
the two configuration lines in the output, resulting in an invalid
`loader.conf`.
GRUB 2.0 supports png, jpeg and tga. This will use the image's suffix to
load the right module.
As jpeg module is named jpeg, jpg is renamed jpeg.
If the user uses wrong image suffix for an image, it wouldn't work anyway.
This will leave up to two additional left-over files in /boot/ if user switches
through all the supported file formats. The module already left the png
image if the user disabled the splash image.
Regression introduced by 801c920e95.
Since then, the btrfsSimple subtest of the installer VM test fails with:
Btrfs did not return a path for the subvolume at /
The reason for this is that the output for "btrfs subvol show" has
changed between version 4.8.2 and 4.13.1.
For example the output of "btrfs subvol show /" in version 4.8.2 was:
/ is toplevel subvolume
In version 4.13.1, the output now is the following and thus the regular
expressions used in nixos-generate-config.pl and install-grub.pl now
match (which results in the error mentioned above):
/
Name: <FS_TREE>
UUID: -
Parent UUID: -
Received UUID: -
Creation time: -
Subvolume ID: 5
Generation: 287270
Gen at creation: 0
Parent ID: 0
Top level ID: 0
Flags: -
Snapshot(s):
In order to fix this I've changed nixos-generate-config.pl and
install-grub.pl, because both use "btrfs subvol show" in a similar vein,
so the regex for parsing the output now doesn't match anymore whenever
the volume path is "/", which should result in the same behaviour as we
had with btrfs-progs version 4.8.2.
Tested against the btrfsSimple, btrfsSubvols and btrfsSubvolDefault
subtests of the installer VM test and they all succeed now.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Grub configs include the NixOS version and date they were built, now
systemd can have fun too:
version Generation 99 NixOS 17.03.1700.51a83266d1, Linux Kernel 4.9.43, Built on 2017-08-30
version Generation 100 NixOS 17.03.1700.51a83266d1, Linux Kernel 4.9.43, Built on 2017-08-30
version Generation 101 NixOS 17.03.1700.51a83266d1, Linux Kernel 4.9.43, Built on 2017-08-31
version Generation 102 NixOS 17.03.1700.51a83266d1, Linux Kernel 4.9.43, Built on 2017-09-01
version Generation 103 NixOS 17.03.1700.51a83266d1, Linux Kernel 4.9.43, Built on 2017-09-02
version Generation 104 NixOS 17.09beta41.1b8c7786ee, Linux Kernel 4.9.46, Built on 2017-09-02
version Generation 105 NixOS 17.09.git.1b8c778, Linux Kernel 4.9.46, Built on 2017-09-02
* systemd-boot-builder.py: add support for profiles
This will also list the generations of other profiles than `system` in
the boot menu. See the documentation of the `--profile-name` option of
nixos-rebuild for more information on profiles.
* Fix errors introduced by previous commit
The default font is unreadably small on some hidpi displays. This
makes it possible to specify a TrueType or OpenType font at any point
size, and it will automatically be converted to the format the Grub
uses.
Restructure the nixos-artwork to make it easy to selectively
incorporate other components from upstream without needing to download
the full package.
Until now only the Gnome_Dark wallpaper was included. Add other
wallpapers available in the package repository.
Since fat32 provides little recovery facilities after a crash,
it can leave the system in an unbootable state, when a crash/outage
happens shortly after an update. To decrease the likelihood of this
event sync the efi filesystem after each update.
Someone on IRC wanted to boot Fedora from another disk. While I'm not
too familiar with UEFI booting in conjunction with GRUB2 it took some
time to get it to work.
So in order to safe others from frustration I'm adding this as another
example to the extraEntries option.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This has surfaced since d990aa7163.
The "simpleUefiGummiboot" installer test fails since this commit,
because that commit introduced a small check to verify whether the store
was altered.
While installing NixOS for the first time, the store is usually in
/mnt/nix/store and without the read-only bind mount that's preventing
programs from altering the store.
So after nixos-install is done creating the system closure and setting
it as the active system profile, the bootloader is written from the
closure inside the chroot. The systemd-boot-builder is invoked during
this step, which adds .pyc files for various Python modules of the
Python 3 store path, which in turn invalidates the hash of the Python 3
store path itself.
At the time the system is booted up again, the nix-store is verified and
fails with something like this:
path /nix/store/zvm545rqc4d97caqq9h7344bnd06jhzb-python3-3.5.3 was
modified! expected hash
b2c975f4b8d197443fbb09690fb3f6545e165dd44c9309d7d6df2fce0579ebeb, got
bccca19f39c9d26d857ccf1fb72818b2b817967e6d497a25a1283e36ed0acf01
Running the interpreter with the -B argument prevents Python from
writing those byte code files:
https://docs.python.org/3/using/cmdline.html#cmdoption-B
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This reverts commit c2b56626f1.
It broke creating the manual. I suspect the descriptions are
auto-wrapped by <para> and </para>.
We've been through this already in 3af715af90.
/cc #24978, @zraexy, @Mic92.
Since systemd version 232 the install subcommand of bootctl opens the
loader.conf with fopen() modes "wxe", where the "e" stands for
exclusive, so the call will fail if the file exists.
For installing the boot loader just once this is fine, but if we're
using NIXOS_INSTALL_BOOTLOADER on a systemd where the bootloader is
already present this will fail.
Exactly this is done within the simpleUefiGummiboot installer test,
where nixos-install is called twice and thus the bootloader is also
installed twice, resulting in an error during the fopen call:
Failed to open loader.conf for writing: File exists
Removing the file prior to calling bootctl should fix this.
I've tested this using the installer.simpleUefiGummiboot test and it now
succeeds.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @edolstra, @shlevy, @mic92
Fixes: #22925
This leads to the following error when trying to install a new machine
where the machine ID wasn't yet initialized during boot:
Failed to get machine did: No such file or directory
In addition this was also detected by the simpleUefiGummiboot installer
test.
So let's generate a fallback machine ID by using
systemd-machine-id-setup before actually running bootctl.
Tested this by running the installer.simpleUefiGummiboot test, it still
fails but not because of the machine ID.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @edolstra, @shlevy, @mic92
Fixes: #22561
The Raspberry Pi boot loader was deleting all xx-initrd text files
(which simply contain the path to the actual initrd files) just after
having created them. The code was actually trying to delete real,
obsolete initrd files, which are named <hash>-initrd-initrd (after path
cleaning), but the glob was catching the other files as well.
This reverts commit 656cc3acaf because it
causes building the manual to fail:
$ nixos-rebuild build
...
building path(s) ‘/nix/store/s9y5z78z5pssvmixcmv9ix13gs8xj87f-manual-olinkdb’
Writing /nix/store/s9y5z78z5pssvmixcmv9ix13gs8xj87f-manual-olinkdb/manual.db for book(book-nixos-manual)
./man-pages.xml:625: element para: Relax-NG validity error : Did not expect element para there
./man-pages.xml:3: element variablelist: Relax-NG validity error : Element refsection has extra content: variablelist
./man-pages.xml:29: element refsection: Relax-NG validity error : Element refentry has extra content: refsection
./man-pages.xml:3: element reference: Relax-NG validity error : Element reference failed to validate content
./man-pages.xml fails to validate
CC @cleverca22, @Mic92
Using the --force option on GRUB isn't recommended, but there are very
specific instances where it makes sense. One example is installing on a
partitionless disk.
When Grub is to be used with UEFI, it is not going to write to any MBR
of any disk. As such, it is safe to use multiple "nodev" device entries
when mirroring the ESP partition to multiple disks.
E.g.:
```
boot.loader.grub = {
enable = true;
version = 2;
zfsSupport = true;
efiSupport = true;
mirroredBoots = [
{ devices = [ "nodev" ]; path = "/boot1"; efiSysMountPoint = "/boot1"; }
{ devices = [ "nodev" ]; path = "/boot2"; efiSysMountPoint = "/boot2"; }
{ devices = [ "nodev" ]; path = "/boot3"; efiSysMountPoint = "/boot3"; }
];
};
boot.loader.efi.canTouchEfiVariables = true;
```
Fixes#18584
Both btrfs-progs and utillinux are ~5MB, we may discuss in future
to handle this better but I see no better way at the moment than
increaing purity in the install process.
Previously, the value from stdenv.platform.kernelDTB was used. That
doesn't work well if both kinds (DTB and non-DTB) of generations exist
in the system profile.
':' is currently used as separator in /boot/grub/state for the list of
devices GRUB should be installed to. The problem is that ':' itself may
appear in a device path:
/dev/disk/by-id/usb-SanDisk_Cruzer_20043512300546C0B317-0:0
With such a path, NixOS will install GRUB *every* time, because it
thinks the configuration differs from the state file (due to the wrong
list split). Fix it by using ',' as separator.
For existing systems with GRUB installed on multiple devices, this
change means that GRUB will be installed one extra time.
When displaying a warning about a removed Option we should always
include reasoning why it was removed and how to get the same
functionality without it.
Introduces such a description argument and patches occurences (mostly
with an empty string).
startGnuPGAgent: further notes on replacement
This reverts commit b861bf8ddf, because according to @mdorman [1] this
change rendered his NixOS systems unbootable, and we probably don't want that.
[1] b861bf8ddf (commitcomment-16058598)
- add missing types in module definitions
- add missing 'defaultText' in module definitions
- wrap example with 'literalExample' where necessary in module definitions
Setting nixosVersion to something custom is useful for meaningful GRUB
menus and /nix/store paths, but actuallly changing it rebulids the
whole system path (because of `nixos-version` script and manual
pages). Also, changing it is not a particularly good idea because you
can then be differentitated from other NixOS users by a lot of
programs that read /etc/os-release.
This patch introduces an alternative option that does all you want
from nixosVersion, but rebuilds only the very top system level and
/etc while using your label in the names of system /nix/store paths,
GRUB and other boot loaders' menus, getty greetings and so on.
Previously this barfed with:
updating GRUB 2 menu...
fileparse(): need a valid pathname at /nix/store/zldbbngl0f8g5iv4rslygxwp0dbg1624-install-grub.pl line 391.
warning: error(s) occured while switching to the new configuration
Option aliases/deprecations can now be declared in any NixOS module,
not just in nixos/modules/rename.nix. This is more modular (since it
allows for example grub-related aliases to be declared in the grub
module), and allows aliases outside of NixOS (e.g. in NixOps modules).
The syntax is a bit funky. Ideally we'd have something like:
options = {
foo.bar.newOption = mkOption { ... };
foo.bar.oldOption = mkAliasOption [ "foo" "bar" "newOption" ];
};
but that's not possible because options cannot define values in
*other* options - you need to have a "config" for that. So instead we
have functions that return a *module*: mkRemovedOptionModule,
mkRenamedOptionModule and mkAliasOptionModule. These can be used via
"imports", e.g.
imports = [
(mkAliasOptionModule [ "foo" "bar" "oldOption" ] [ "foo" "bar" "newOption" ]);
];
As an added bonus, deprecation warnings now show the file name of the
offending module.
Fixes#10385.
When using extlinux-conf-builder in a nix build using chroots, the
following error message could be seen:
/nix/store/XXX-extlinux-conf-builder.sh: line 121: cd: /nix/var/nix/profiles: No such file or directory
To avoid this, just skip the code path parsing /nix/var/nix/profiles
when $numGenerations (passed from the command line) is 0 (which is the
only legal value of $numGenerations in a nix build context).
Without a menu title, U-Boot's distro scripts just autoboot the first
entry by default.
When I initially wrote this, my board wasn't apparently running stock
U-Boot but had some local hacks saved in the U-Boot's environment
which made it always display the prompt.
When calling addEntry inside a subshell, the filesCopied array would
be updated only in the subshell's environment. This would only cause an
issue if no -g flag was passed to the script, causing no kernels
to be copied.
Some filesystems like fat32 don't support symlinking and need to be
supported on /boot as an efi system partition. Instead of creating the symlink directly in boot, create the symlink in
a temporary directory which has to support symlinking.
This module generates a /boot/extlinux/extlinux.conf bootloader
configuration file that is supported by e.g. U-Boot:
http://git.denx.de/?p=u-boot.git;a=blob;f=doc/README.distro;hb=refs/heads/master
With this, all ARM boards supported by U-Boot can be booted in a common
way (a single boot file generator, all boards booting via initrd like
x86) and with same boot menu functionality as GRUB has.
-- sample extlinux.conf file --
# Generated file, all changes will be lost on nixos-rebuild!
# Change this to e.g. nixos-42 to temporarily boot to an older configuration.
DEFAULT nixos-default
TIMEOUT 50
LABEL nixos-default
MENU LABEL NixOS - Default
LINUX ../nixos/n7vxfk60nb5h0mcbhkwwxhcz2q2nvxzv-linux-4.1.0-rc3-cpufreq-zImage
INITRD ../nixos/0ss2zs8sb6d1qn4gblxpwlxkfjsgs5f0-initrd-initrd
FDTDIR ../nixos/n7vxfk60nb5h0mcbhkwwxhcz2q2nvxzv-linux-4.1.0-rc3-cpufreq-dtbs
APPEND systemConfig=/nix/store/469qvr43ln8bfsnk5lzcz6m6jfcgdd4r-nixos-15.06.git.0b7a7a6M init=/nix/store/469qvr43ln8bfsnk5lzcz6m6jfcgdd4r-nixos-15.06.git.0b7a7a6M/init loglevel=8 console=ttyS0,115200n8 drm.debug=0xf
LABEL nixos-71
MENU LABEL NixOS - Configuration 71 (2015-05-17 21:32 - 15.06.git.0b7a7a6M)
LINUX ../nixos/n7vxfk60nb5h0mcbhkwwxhcz2q2nvxzv-linux-4.1.0-rc3-cpufreq-zImage
INITRD ../nixos/0ss2zs8sb6d1qn4gblxpwlxkfjsgs5f0-initrd-initrd
FDTDIR ../nixos/n7vxfk60nb5h0mcbhkwwxhcz2q2nvxzv-linux-4.1.0-rc3-cpufreq-dtbs
APPEND systemConfig=/nix/store/469qvr43ln8bfsnk5lzcz6m6jfcgdd4r-nixos-15.06.git.0b7a7a6M init=/nix/store/469qvr43ln8bfsnk5lzcz6m6jfcgdd4r-nixos-15.06.git.0b7a7a6M/init loglevel=8 console=ttyS0,115200n8 drm.debug=0xf
It boots, but some things still don't work:
1) Installation of DTBs
2) Boot of initrd
Booting still needs a proper config.txt in /boot, which could probably be
managed by NixOS.
When gummiboot.timeout == null, the menu will still be skipped.
When gummiboot.timeout == 0, the menu will also be skipped.
The only way to show the menu 'indefinitely' is to show it a long time.
During install, the bootloader script gets run inside a chroot after the
/etc/group bind-mount is unmounted. Since we're not doing any building,
this should be safe, but really nix should just not care if the group
does not exist when no build is needed.
Fixes#5494
The gummiboot-builder.py script is expecting the @timeout@ metavar to be
substituted for either an empty string (in the case where a user has
left the timeout unset) or the actual value set in the system
configuration.
However, the config.boot.loader.gummiboot.timeout option defaults to
'null', and due to the way pkgs.substituteAll works, the substitution
for '@timeout@' is _never_ set to the empty string. This causes the
builder script to put a bogus line into /boot/loader/loader.conf:
timeout @timeout@
Fix this by explicitly setting 'timeout' to the empty string when it's
unset in the system configuration.
Signed-off-by: Josh Cartwright <joshc@eso.teric.us>
