Prior to this change a service failure would occur when this tmpfiles
service did not finish fast enough and receive a SIGTERM from systemd.
Additionally, `initrd-nixos-activation` is already ordered with
`After=initrd-switch-root.target`.
By default, systemd-repart refuses to act on empty disk devices, i.e.
those without any existing partition table for safety reasons.
This behaviour can be customized via the `--empty` flag, which we now
expose via the module system. This makes to partition empty disks
on first boot.
These daemons should not be stopped, as they're foundational to a
proper functioning of the system. When switching configurations, they
only need a restart instead of that stop/start cycle.
Helps the following situation:
- SSH in initrd is enabled
- NixOS is waiting for a password to be typed at the console (or
provided via cryptsetup-askpass)
- The user logs in via SSH, but instead of running cryptsetup-askpass,
they run "cryptsetup open" directly (because they don't know that
they need to use NixOS's cryptsetup-askpass script, or because they
want to use a non-trivial unlocking method that is not natively
supported by this module)
Currently, in the above situation, NixOS will keep waiting for a
password to be entered even though the device is already unlocked. If
a password is entered, it will print a confusing "already exists"
error and keep asking for the same password.
We can improve on this by simply checking if the device is already
unlocked in our read loop. In this case, we don't need to do anything
other than return from the function and continue booting.
Removing the splash param only causes plymouth to display console
output by default; it still runs. Systemd stage 1 respects this flag
due to unit conditions preventing plymouth from even running. So this
brings parity to scripted stage 1.
When using nixos-enter (and so also nixos-install) on a system with etc-overlay enabled,
he activation script gets called directly, and there is no systemd running.
This violates a couple of assumptions in the etc-overlay activation script which
assumed that it only ever ran when switching into a new generation and that
the very first /etc would always have been set up by the systemd initrd.
As more and more things are being moved into systemd components (initrd services,
mount units, tmpfiles, etc), I think that it is going to become increasingly
difficult to stay compatible with these tools, but at least for now there is
no real alternative and so we probably want to be able to install systems
with etc-overlay enabled.
This makes it so that the getty units are only included if
`config.console.enable` is set to `true`. Previously, they would be
included, but disabled in that case, which is unnecessary.
The assertion is based on the availability of `move-mount-beneath`, which is only used in re-activation logic for switchable systems. Systems that have `system.switch.enable == false` should be allowed to user older kernels.
After final improvements to the official formatter implementation,
this commit now performs the first treewide reformat of Nix files using it.
This is part of the implementation of RFC 166.
Only "inactive" files are reformatted, meaning only files that
aren't being touched by any PR with activity in the past 2 months.
This is to avoid conflicts for PRs that might soon be merged.
Later we can do a full treewide reformat to get the rest,
which should not cause as many conflicts.
A CI check has already been running for some time to ensure that new and
already-formatted files are formatted, so the files being reformatted here
should also stay formatted.
This commit was automatically created and can be verified using
nix-build a08b3a4d19.tar.gz \
--argstr baseRev b32a094368
result/bin/apply-formatting $NIXPKGS_PATH
As it helps making deps easier to discover - as we don't currently
render submodule options in the module correctly - and is arguably
more technical correct: When using nixos-install to install nixos
into a chroot in i.e. /mnt, there's no gurantee that /mnt/dev exists
before the specialfs phase ran.
On recent kernels (> 6.12 ?) we get the following warning otherwise:
`mount: /tmp/nixos-etc-metadata.aHpRhO5sC4: WARNING: source write-protected, mounted read-only.`
Previously, if any unit had a socket associated with it, stc-ng
counted it as "socket-activated", meaning that the unit would get
stopped and the socket get restarted. That can wreak havoc on units
like systemd-udevd and systemd-networkd.
Instead, let units set the new flag notSocketActivated, which sets a
boolean on the unit indicating to stc-ng that the unit wants to be
treated like any other non-socket-activated unit instead. That will
stop/start or restart these units on upgrades, without unnecessarily
tearing down any machinery that the system needs to run.
Add an option for shell script fragments that are ran before switching
to a new NixOS system configuration (pre installation of bootloader or
system activation). Also add a new subcommand for
switch-to-configuration called "check" that will cause the program to
always exit after checks are ran.
See https://github.com/systemd/systemd/issues/33414.
The way this was phrased sounded like a dumb search/replace operation to
me. This resulted in random parts of my routing being broken (forward
from if X -> Y being fine, but the opposite direction being broken).
This change makes it explicit that it's a little more complicated and
you should really consult the docs before making that change.
Now it's placed between initrd-switch-root.target and
initrd-switch-root.service, meaning it is truly the last thing to
happen before switch-root, as it should be.
Reverts #344407
This has broken nixos-rebuild switch so that it no longer updates the profile, which has bad consequences including not updating the systemd-boot menu with new generations.
Originally, we switched to bsdtar from libarchive to solve a reproducibility issue related to hardlinks
As of gnu cpio 2.14 the --ignore-dirnlink option is introduced and now included in --reproducible, which solves this issue
By switching back, we are in turn solving an issue in libarchive >=3.7.5 erroring out with "Error reading archive -: (null)"
Change-Id: Ib6140d599b6547d8e941b0251ce996e303c41fa6
Prior to this contribution, every boot with a default configuration was
considered `ConditionFirstBoot=true` by systemd, since /etc/machine-id
was not commited to disk.
This also extends the systemd with a check for subsequent boots not
being considered first boots.
The perl snippet as been added years ago. I assume the intention was to
remove the `## file: iwlwifi.conf` section up to the next `## file:`,
but as there is no file following, the snippet currently does nothing.
We should be fine to remove it.
Signed-off-by: Paul Meyer <49727155+katexochen@users.noreply.github.com>
Before this change, the hash of the etc metadata image was included in
the mount unit that's responsible for mounting this metadata image in the
initrd.
And because this metadata image changes with every change to the etc
contents, the initrd would be rebuild every time as well.
This can lead to a lot of rebuilds (especially when revision info is
included in /etc/os-release) and all these initrd archives use up a lot of
space on the ESP.
With this change, we instead include a symlink to the metadata image in the
top-level directory, in the same way as we already do for things like init and
prepare-root, and we deduce the store path from the init= kernel parameter,
in the same way as we already do to find the path to init and prepare-root.
Doing so avoids rebuilding the initrd all the time.
When installing NixOS on a machine with Windows, the "easiest" solution
to dual-boot is re-using the existing EFI System Partition (ESP), which
allows systemd-boot to detect Windows automatically.
However, if there are multiple ESPs, maybe even on multiple disks,
systemd-boot is unable to detect the other OSes, and you either have to
use Grub and os-prober, or do a tedious manual configuration as
described in the wiki:
https://wiki.nixos.org/w/index.php?title=Dual_Booting_NixOS_and_Windows&redirect=no#EFI_with_multiple_disks
This commit automates and documents this properly so only a single line
like
boot.loader.systemd-boot.windows."10".efiDeviceHandle = "HD0c2";
is required.
In the future, we might want to try automatically detecting this
during installation, but finding the correct device handle while the
kernel is running is tricky.
This reverts commit 4daccf208f
The reverted commit claims that bootctl fails if machine-id is not set.
I can not reproduce this. I think this has since been fixed now that
bootctl has support for arbtirary entry-tokens and not just machine-id.
In the case of NixOS the entry-token is the string "nixos"
systemd 256 supports network.wireguard.* credentials (https://github.com/systemd/systemd/pull/30826).
Check whether PrivateKey / PresharedKey starts with an @, if so it is a credential.
In preparation for the deprecation of `stdenv.isX`.
These shorthands are not conducive to cross-compilation because they
hide the platforms.
Darwin might get cross-compilation for which the continued usage of `stdenv.isDarwin` will get in the way
One example of why this is bad and especially affects compiler packages
https://www.github.com/NixOS/nixpkgs/pull/343059
There are too many files to go through manually but a treewide should
get users thinking when they see a `hostPlatform.isX` in a place where it
doesn't make sense.
```
fd --type f "\.nix" | xargs sd --fixed-strings "stdenv.is" "stdenv.hostPlatform.is"
fd --type f "\.nix" | xargs sd --fixed-strings "stdenv'.is" "stdenv'.hostPlatform.is"
fd --type f "\.nix" | xargs sd --fixed-strings "clangStdenv.is" "clangStdenv.hostPlatform.is"
fd --type f "\.nix" | xargs sd --fixed-strings "gccStdenv.is" "gccStdenv.hostPlatform.is"
fd --type f "\.nix" | xargs sd --fixed-strings "stdenvNoCC.is" "stdenvNoCC.hostPlatform.is"
fd --type f "\.nix" | xargs sd --fixed-strings "inherit (stdenv) is" "inherit (stdenv.hostPlatform) is"
fd --type f "\.nix" | xargs sd --fixed-strings "buildStdenv.is" "buildStdenv.hostPlatform.is"
fd --type f "\.nix" | xargs sd --fixed-strings "effectiveStdenv.is" "effectiveStdenv.hostPlatform.is"
fd --type f "\.nix" | xargs sd --fixed-strings "originalStdenv.is" "originalStdenv.hostPlatform.is"
```
Move replaceRuntimeDependencies to the replaceDependencies namespace,
where the structure is more consistent with the replaceDependencies
function. This makes space for wiring up cutoffPackages as an option
too.
By default, the system's initrd is excluded. The replacement process does not
work properly anyway due to the structure of the initrd (the files being copied
into it, and it being compressed). In the worst case (which has been observed
to actually occur in practice), a store path makes it into the incompressible
parts of the archive, checksums are broken, and the system won't boot.
Instead of iterating over all replacements and applying them one by one,
use the newly introduced replaceDependencies function to apply them all
at once for replaceRuntimeDependencies. The advantages are twofold in
case there are multiple replacements:
* Performance is significantly improved, because there is only one pass
over the closure to be made.
* Correctness is improved, because replaceDependencies also replaces
dependencies of the replacements themselves if applicable.
Fixes: https://github.com/NixOS/nixpkgs/issues/4336
tpm2.target was functionally useless without these services and this
generator. When systemd-cryptsetup-generator creates
systemd-cryptsetup@.service units, they are ordered after
systemd-tpm2-setup-early.service, not tpm2.target. These services are
themselves ordered after tpm2.target.
Note: The systemd-tpm2-setup(-early) services will serve no *function*
under a normal NixOS system at the moment. Because of their
ConditionSecurity=measured-uki, they will always be skipped, unless
you are building an appliance with the system.build.uki feature. Thus,
these are enabled solely for their systemd unit ordering properties.
