One of the main premises of NixOS is being able to declaratively specify
the services enabled/running on a machine. Since systemd presets allow
to bypass this this declarative nature, add a single preset with the
highest priority (prefixed with "00") that makes systemd ignore all
other presets.
If we let systemd setup /etc/machine-id, we get to use
ConditionFirstBoot in systemd units and any other integrations related
to systemd's detection of first boot. See machine-id(5).
When `services.resolved` is enabled, then `resolve [!UNAVAIL=return]`
is added to `system.nssDatabases.hosts` with priority 501,
which prevents lower-priority NSS modules from running
unless systemd-resolved is not available.
Quoting from `man nss-resolve`:
> To activate the NSS module, add "resolve [!UNAVAIL=return]" to the line
> starting with "hosts:" in /etc/nsswitch.conf. Specifically, it is
> recommended to place "resolve" early in /etc/nsswitch.conf's "hosts:"
> line. It should be before the "files" entry, since systemd-resolved
> supports /etc/hosts internally, but with caching. To the contrary, it
> should be after "mymachines", to give hostnames given to local VMs and
> containers precedence over names received over DNS. Finally, we
> recommend placing "dns" somewhere after "resolve", to fall back to
> nss-dns if systemd-resolved.service is not available.
Note that the man page (just) recommends "early" and means with this
"before the 'files' and 'dns' entries". It does not insist on being
first or excluding other modules.
For this reason, libvirt NSS modules should run before the `resolve`
module. They should come right next to `mymachines` because both are
conceptually very similar -- they resolve local VMs/containers.
Since the data source of the libvirt NSS modules are local
plain text files (see source code of the libvirt NSS module),
no performance impact is expected form this raise of priorities.
Other NSS modules in NixOS also explicitly set their priority, which is
why this change increases consistency.
Fixes#322022
This allows us to set things like dependencies in a way that we can
catch typos at eval time.
So instead of
```nix
systemd.services.foo.wants = [ "bar.service" ];
```
we can write
```nix
systemd.services.foo.wants = [ config.systemd.services.bar.name ];
```
which will throw an error if no such service has been defined.
Not all cases can be done like this (eg template services), but in a lot
of cases this will allow to avoid typos.
There is a matching option on the unit option
(`systemd.units."foo.service".name`) as well.
There were several modules, critically including NetworkManager, which
were not prepared for this change. Most of the change was good,
however. Let's bring back the dependency and change the assertion to a
warning for now.
Previously we required network-online.target for multi-user.target. This
has made a lot of people very angry and has been widely regarded as a
bad move (or at least, very nonstandard):
15d761a525 (commitcomment-128564097)
This was done because of fragile tests and services declaring
dependencies on multi-user.target when they meant network-online.target.
Let's rip off the bandaid and fix our tests.
The `AUTOFS4_FS` name appears to be a legacy naming stub:
>Ok, I ran the script, and also decided that we might as well remove
>the AUTOFS4 legacy naming stub entry by now.
>
>It has been five years, and people will have either picked up the new
>name with 'make oldconfig', or they just don't use 'make oldconfig' at
>all.
https://lore.kernel.org/lkml/CAHk-=wgK9-Tx4BxYMrc0pg==mcaz3cjWF6-CBwVpM_BZAmf4JQ@mail.gmail.com/#r
That has been remove in 6.6 kernel and results in a failure:
```
error:
Failed assertions:
- CONFIG_AUTOFS4_FS is not enabled!
```
Signed-off-by: Jakub Sokołowski <jakub@status.im>
This fixes notably the fact that /dev/zfs was not usable anymore as a user,
and potentially other things.
Tracked in systemd upstream under issue number 28653, 28765.
`systemd-growfs@.service` and `systemd-growfs-root.service` became real units since:
50072ccf1b
we need to add them to the nixos module so growfs works again
Or else systemd-oomd gets marked as failed due to
"Userspace Out-Of-Memory (OOM) Killer was skipped because of a failed condition check (ConditionControlGroupController=v2)."
and cause the system to enter degraded state.
Ref https://github.com/NixOS/nixpkgs/issues/195085
The ConditionFileNotEmpty override patch wasn't correct for stage1, which
does have the modules in /lib. So, remove the patch and set
the right path with overrides in the final system.
Also, make sure systemd-tmpfiles-setup-dev is pulled in to create
all the necessary symlinks.
Account for all `with*` options causing their respective unit files to
not be built, just like the current code `withCryptsetup` already does.
This fixes build errors like the following:
```
missing /nix/store/5fafsfms64fn3ywv274ky7arhm9yq2if-systemd-250.4/example/systemd/system/systemd-importd.service
error: builder for '/nix/store/67rdli5q5akzwmqgf8q0a1yp76jgr0px-system-units.drv' failed with exit code 1
```
Found by using a customised systemd package as follows:
```
systemd.package = pkgs.systemd-small;
nixpkgs.config.packageOverrides = pkgs: {
"systemd-small" = pkgs.systemd.override {
withImportd = false;
withMachined = false;
...
};
};
```
It's already defined in `systemd/user.nix`.
This is a leftover from commit b6d50528dd
where all `systemd.user` settings were moved to `systemd/user.nix`.
using freeform is the new standard way of using modules and should replace
extraConfig.
In particular, this will allow us to place a condition on mails
This accomplishes multiple things:
- Allows us to start systemd without stage-2-init.sh. This was not
possible before because the environment would have been wrong
- `systemctl daemon-reexec` also changes the environment, giving us
newer tools for the fs packages
- Starts systemd in a fully clean environment, making everything more
consistent and pure
wtmp and btmp are created by systemd, so the rules are more appropriate there.
They can be disabled explicitly with something like
services.ogrotate.paths = {
"/var/log/btmp".enable = false;
"/var/log/wtmp".enable = false;
};
if required.
Add `shellDryRun` to the generic stdenv and substitute it for uses of
`${stdenv.shell} -n`. The point of this layer of abstraction is to add
the flag `-O extglob`, which resolves#126344 in a more direct way.
/etc/crypttab can contain the _netdev option, which adds crypto devices
to the remote-cryptsetup.target.
remote-cryptsetup.target has a dependency on cryptsetup-pre.target. So
let's add both of them.
Currently, one needs to manually ssh in and invoke `systemctl start
systemd-cryptsetup@<name>.service` to unlock volumes.
After this change, systemd will properly add it to the target, and
assuming remote-cryptsetup.target is pulled in somewhere, you can simply
pass the passphrase by invoking `systemd-tty-ask-password-agent` after
ssh-ing in, without having to manually start these services.
Whether remote-cryptsetup.target should be added to multi-user.target
(as it is on other distros) is part of another discussion - right now
the following snippet will do:
```
systemd.targets.multi-user.wants = [ "remote-cryptsetup.target" ];
```
Fixes:
```
activating the configuration...
warning: user ‘systemd-coredump’ has unknown group ‘systemd-coredump’
setting up /etc...
```
Oversight of #133166
The main goal of this commit is to replace the rather fragile passing of
multiple arrays which could break in cases like #130935.
While I could have just added proper shell escaping to the variables
being passed, I opted for the more painful approach of replacing the
fragile and somewhat strange construct with the 5 bash lists. While
there are currently no more problems present with the current approach
(at least none that I know of), the new approach seems more solid and
might get around problems that could arise in the future stemming from
either the multiple-lists situation or from the absence of proper shell
quoting all over the script.
systemd-coredump tries to drop privileges to a systemd-coredump user if
present (and falls back to the root user if it's not available).
Create that user, and recycle uid 151 for it. We don't really care about
the gid.
Fixes https://github.com/NixOS/nixpkgs/issues/120803.
- The order of NSS (host) modules has been brought in line with upstream
recommendations:
- The `myhostname` module is placed before the `resolve` (optional) and `dns`
entries, but after `file` (to allow overriding via `/etc/hosts` /
`networking.extraHosts`, and prevent ISPs with catchall-DNS resolvers from
hijacking `.localhost` domains)
- The `mymachines` module, which provides hostname resolution for local
containers (registered with `systemd-machined`) is placed to the front, to
make sure its mappings are preferred over other resolvers.
- If systemd-networkd is enabled, the `resolve` module is placed before
`files` and `myhostname`, as it provides the same logic internally, with
caching.
- The `mdns(_minimal)` module has been updated to the new priorities.
If you use your own NSS host modules, make sure to update your priorities
according to these rules:
- NSS modules which should be queried before `resolved` DNS resolution should
use mkBefore.
- NSS modules which should be queried after `resolved`, `files` and
`myhostname`, but before `dns` should use the default priority
- NSS modules which should come after `dns` should use mkAfter.
Declaring them as lists enables the concatenation, supporting
lib.mkBefore, lib.mkOrder, etc.
This is useful when you need to extend a service with a pre-start
script that needs to run as root.
See https://www.redhat.com/sysadmin/fedora-31-control-group-v2 for
details on why this is desirable, and how it impacts containers.
Users that need to keep using the old cgroup hierarchy can re-enable it
by setting `systemd.unifiedCgroupHierarchy` to `false`.
Well-known candidates not supporting that hierarchy, like docker and
hidepid=… will disable it automatically.
Fixes#73800
These were broken since 2016:
f0367da7d1
since StartLimitIntervalSec got moved into [Unit] from [Service].
StartLimitBurst has also been moved accordingly, so let's fix that one
too.
NixOS systems have been producing logs such as:
/nix/store/wf98r55aszi1bkmln1lvdbp7znsfr70i-unit-caddy.service/caddy.service:31:
Unknown key name 'StartLimitIntervalSec' in section 'Service', ignoring.
I have also removed some unnecessary duplication in units disabling
rate limiting since setting either interval or burst to zero disables it
(ad16158c10/src/basic/ratelimit.c (L16))
