This makes the following work
disabledModules = [ foo.nixosModules.bar ];
even if `bar` is not a path, but rather a module such as
{ key = "/path/to/foo#nixosModules.bar"; config = ...; }
By supporting this, the user will often be able to use the same syntax
for both importing and disabling a module. This is becoming more relevant
because flakes promote the use of attributes to reference modules. Not
all of these modules in flake attributes will be identifiable, but with
the help of a framework such as flake-parts, these attributes can be
guaranteed to be identifiable (by outPath + attribute path).
* k3s: add environmentFile option
Enabling to include secrets through configuration such as 'sops'
* Update nixos/doc/manual/release-notes/rl-2305.section.md
Co-authored-by: Jairo Llopis <973709+yajo@users.noreply.github.com>
Update protonmail-bridge to v3. This also rename the CLI executable from
protonmail-bridge to bridge to be more in line with upstream naming.
Co-authored-by: James Landrein <github@j4m3s.eu>
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
In general the man pages do not care what OS and manual they are shipped
with, so they don't get to choose the names of them. We were tempted to
do so, as we had inconsistently chosen OS names for the mandoc and
man-db/groff implementations. Since this has been rectified since, we
can just drop this boilerplate from the man pages.
Upstream has officially abandoned the project as of 2021 [0], there's been
no release since 2016, it uses the EoL Qt 4, and alternatives like
KeePassXC exist.
Also move KeePassXC to its own directory -- it doesn't make sense to
have it in KeePassX's folder anymore.
[0]: https://www.keepassx.org/index.html%3Fp=636.html
this reproduces the docbook-generated html manual exactly enough to
appease the compare workflows while we still support both toolchains.
it's also a lot faster than the docbook toolchain, rendering the entire
html manual in about two seconds on this machine (while docbook needs
about 20).
Provide a module to configure Coqui TTS, available as `tts` in nixpkgs
for a few releases already.
The module supports multiple servers in parallel, so multiple languages
and testing scenarios can be covered, without affecting any production
usage.
options processing is pretty slow right now, mostly because the
markdown-it-py parser is pure python (and with performance
pessimizations at that). options parsing *is* embarassingly parallel
though, so we can just fork out all the work to worker processes and
collect the results.
multiprocessing probably has a greater benefit on linux than on darwin
since the worker spawning method darwin uses is less efficient than
fork() on linux. this hasn't been tested on darwin, only on linux, but
if anything darwin will be faster with its preferred method.
these files provided mainly or exclusively xml-related tooling and
support for editing the manual. since docbook is now an implementation
detail (except for still being allowed in option docs, for now) these
tools are no longer necessary, useful, or even functional.
xmlformat.conf is still used by the nixpkgs documentation, so we have to
keep it. there's no reason it can't go live with the nixpkgs docs though.
this adds support for structural includes to nixos-render-docs.
structural includes provide a way to denote the (sub)structure of the
nixos manual in the markdown source files, very similar to how we used
literal docbook blocks before, and are processed by nixos-render-docs
without involvement of xml tooling. this will ultimately allow us to
emit the nixos manual in other formats as well, e.g. html, without going
through docbook at all.
alternatives to this source layout were also considered:
a parallel structure using e.g. toml files that describe the document
tree and links to each part is possible, but much more complicated to
implement than the solution chosen here and makes it harder to follow
which files have what substructure. it also makes it much harder to
include a substructure in the middle of a file.
much the same goes for command-line arguments to the converter, only
that command-lined arguments are even harder to specify correctly and
cannot be reasonably pulled together from many places without involving
another layer of tooling. cli arguments would also mean that the manual
structure would be fixed in default.nix, which is also not ideal.
- inline copySources into single user
- remove `inherit sources` where it's not necessary
- inline generatedSources. this will go away completely soon so we may
as well.
- inline modulesDoc into manual-combined. this too will go away soon.
- inline sources into manual-combined. this too will go away soon.
once we generate the entire manual-combined.xml with a single
nixos-render-docs invocation we will no longer need any options xml
files. likewise we do not need the test options xml in the manpage
build. splitting manpages-combined from manual-combined also allows
these two to run in parallel, slightly improving build times.
man-configuration.xml is the only manpage we build using docbook at this
time, and man-pages.xml includes just this one file. inline
man-configuration.nix into man-pages.xml so we can refer to a single
file to grab the manpage sources later rather than using find-by-suffix.
render all manual chapters to docbook from scratch every time the manual
is built. nixos-render-docs is quick enough at this to not worry about
the cost (needing only about a second), and it means we can remove
md-to-db.sh in the next commit.
no changes to the rendered html manual except for replacements and smartquotes.
we'll soon add another docbook converter that does not emit a section as
a collection of chapters, but sections or chapters on their own. this
should clarify naming a bit before there can be any confusion.
since support for kbd elements was added with explicit intent in #175128
it seems like a good idea to support this in nixos-render-docs instead
of just dropping it in favor of `*F12*` etc. since it's a very rare
thing in the manual and purely presentational it makes sense to use
bracketed spans instead of a new myst role.
the html-elements.lua plugin is now somewhat misnamed, but it'll go away
very soon so we don't want to bother renaming it.
this is a lot easier than adding footnote support for just the one
instance. if a use case for footnotes appears in the future (e.g. if we
wanted to render the nixpkgs manual with nixos-render-docs as well) this
decision should be reevaluated.
nixos-render-docs supports inline anchors, but not ids for blocks. it
seems wise to reserve blocks for special cases that don't have other
syntax already, like admonitions.
pandoc drops .title classes when rendering to docbook, so these are
effectively just paragraphs anyway. without support for including them
in a table of contents the complexity of parsing them in
nixos-render-docs won't be warranted.
the examples for mkPackageOption weren't terminated, leading to pretty
odd nesting of docbook (and thus html) elements. close them properly.
also turn the (likewise unclosed) fenced div containing just an anchor
id and a class that will be silently dropped to an inline anchor while
we're here. we'd have to convert it anyway later.
markdown-it parses deflists slitghtly differently than pandoc does. in
these two cases pandoc would find a deflist item while markdown-it would
not, instead it'd find a lone colon and the rest of the text.
pandoc renders these to multiple docbook paragraphs in a single
definition for the term, not multiple *actual* definitions for the same
term. this is most likely not what is intended here, so let's use
multiple paragraphs instead.
this should be placed before the appendices, not between them. might
even have a good place in the development part, but that's a decision
for another day.
mdoc is just too slow to render on groff, and semantic markup doesn't
help us any for generated pages.
this produces a lot of changes to configuration.nix.5, but only few
rendering changes. most of those seem to be place losing a space where
docbook emitted roff code that did not faithfully represent the input
text, though a few places also gained space where docbook dropped them.
notably we also don't need the compatibility code docbook-xsl emitted
because that problem was fixed over a decade ago.
this will handle block quotes, which the docbook stylesheets turned into
a mess of roff requests that ended up showing up in the output instead
of being processed.
This patch provides input arguments `newuidmapPath` and `newgidmapPath`
for apptainer and singularity to specify the path to the SUID-ed executables
newuidmap and newgidmap where they are not available from the FHS PATH.
As NixOS places those suided executables in a non-FHS position
(/run/wrapper/bin), this patch provides
programs.singularity.enableFakeroot option and implement with the above
input parameters.
Upstream changes:
singularity 3.8.7 (the legacy) -> apptainer 1.1.3 (the renamed) / singularity 3.10.4 (Sylabs's fork)
Build process:
* Share between different sources
* Fix the sed regexp to make defaultPath patch work
* allowGoReference is now true
* Provied input parameter removeCompat (default to false)
that removes the compatible "*singularity*" symbolic links
and related autocompletion files when projectName != "singularity"
* Change localstatedir to /var/lib
* Format with nixpkgs-fmt
* Fix the defaultPath patching
and use it instead of the `<executable> path` config directive
deprecated in Apptainer
* Provide dependencies for new functionalities such as
squashfuse (unprivileged squashfs mount)
* Provide an attribute `defaultPathInputs` to override
prefix of container runtime default PATH
NixOS module programs.singularity:
* Allow users to specify packages
* Place related directories to /var/lib
* Format with nixpkgs-fmt
singularity-tools:
* Allow users to specify packages
* Place related directories to /var/lib when building images in VM
nixos/manual/manpages: add description on previewing manpage files
I was a bit lost with the new manpage format and it took me some time to
find the corresponding pull request by @pennae with a very helpful
comment of @alyssais that mentioned this:
https://github.com/NixOS/nixpkgs/pull/213256#issuecomment-1407713215
As @pennae noted, the file path is only a fallback if it cannot be resolved in the man database
Co-authored-by: pennae <82953136+pennae@users.noreply.github.com>
This commit changes from a precompiled bundle to
a source file. Accordingly, the expression file is renamed to `default.nix`
and the old attribute name is changed to `tvbrowser`, the old one being now a
throw-message.
The upstream build script tries to download the news plugin; so, we provide
this and pass it as a parameter.
Given that this is still a piece of a precompiled Java bytecode, along with a
main readable source bundle, `meta.sourceProvenance` is updated accordingly.
since we want to move away from docbook and having docbook manpages
around is going to block further progress we have to translate the
current nixos manpages from docbook it *something* else. mdoc seems the
most appropriate choice since markdown can't represent all the things
manpages can differentiate with even more extensions. if we ever need
html manpages we can render them using troff, like many of the online
manpage viewers, or rewrite them again. since we haven't had html
manpages for any of these in many years that seems unlikely to happen.
unlike most of the recent markdown conversions this comes with a lot of
minor rendering changes, mostly in spacing. docbook-xslt creates manual
pages in a very different dialect than mdoc (which is used here).
As announced in the NixOS 22.11 release notes, 23.05 will switch NixOS
to using nsncd (a non-caching reimplementation in Rust) as NSS lookup
dispatcher, instead of the buggy and deprecated glibc-provided nscd.
If you need to switch back, set `services.nscd.enableNsncd = false`, but
please open an issue in nixpkgs so your issue can be fixed.
...for explicitly named network interfaces
This reverts commit 6ae3e7695e.
(and evaluation fixups 08d26bbb727aed90a969)
Some of the tests fail or time out after the merge.
Wordpress bundles some non-essential plugins and themes, then pesters
users to upgrade them. As we make the whole webroot readonly, it is
not possible to trivially delete them. Instead we should have users
explicitly install plugins via the existing nixos module.
this converts meta.doc into an md pointer, not an xml pointer. since we
no longer need xml for manual chapters we can also remove support for
manual chapters from md-to-db.sh
since pandoc converts smart quotes to docbook quote elements and our
nixos-render-docs does not we lose this distinction in the rendered
output. that's probably not that bad, our stylesheet didn't make use of
this anyway (and pre-23.05 versions of the chapters didn't use quote
elements either).
also updates the nixpkgs manual to clarify that option docs support all
extensions (although it doesn't support headings at all, so heading
anchors don't work by extension).
In an effort to better encode version strings and use descriptive pnames
that do not conflict with top level pkgs, we currently use
wordpress-${type}-${pname} for pname. This is good for the nix store,
but when we synthesize the wordpress derivation in our module, we reuse
this pname for the output directory.
Internally wordpress can handle this fine, since plugins must register
via php, not directory. Unfortunately, many plugins like civicrm and
wpforms-lite are designed to rely upon the name of their install
directory for homing or discovery.
As such, we should follow both the upstream convention and
services.nextcloud.extraApps and use an attribute set for these options.
This allows us to not have to deal with the implementation details of
plugins and themes, which differ from official and third party, but also
give users the option to override the install location. The only issue
is that it breaks the current api.
`shell_interact()` is currently not nice to use. If you try to cancel
the socat process, it will also break the nixos test. Furthermore
ptpython creates it's own terminal that subprocesses are running in,
which breaks some of the terminal features of socat.
Hence this commit extends `shell_interact` to allow also to connect to
arbitrary servers i.e. tcp servers started by socat.
as far as we can tell nixos has only ever had a total of one olink, and
currently has no olinks at all. we can't currently represent olinks in
markdown docs, and if we re-add support for cross-document links they
will take a different form (and not use docbook, which will have to be
phased out before we re-add anything).
the olinkdb is thus unused and takes 10 seconds on our machine to build,
holding up the rest of the manual for no benefit.
Without this commit, unsetting any of the `services.kubo.settings` options does not reset the value back to the default. This commit gets rid of this statefulness.
This is achieved by generating the default config, applying the user specified config options to it and then patching the `Identity` and `Pinning` config options from the old config back in. This new config is then applied using `ipfs config replace`.
The only remaining stateful parts of the config are the `Identity` and `Pinning.RemoteServices` settings as those can't be changed with `ipfs config replace`. `Pinning.RemoteServices` also contains secrets that shouldn't be in the Nix store. Setting these options wasn't possible before as it would result in an error when the daemon tried to start. I added some assertions to guard against this case.
Trivial conflict in release notes, except that the xml/docbook parts
are horrible for (semi-)automatic conflict resolution.
Fortunately that's generated anyway.
Adds a new option to the virtualisation modules that enables specifying
explicitly named network interfaces in QEMU VMs. The existing
`virtualisation.vlans` is still supported for cases where the name of
the network interface is irrelevant.
`autosuspend` is a daemon that periodically runs user-defined checks to
verify whether the system should be suspended. It's already available
in nixpkgs. This adds a NixOS module which starts the daemon as a
systemd service.
Co-authored-by: pennae <82953136+pennae@users.noreply.github.com>
following the plan in https://github.com/NixOS/nixpkgs/pull/189318#discussion_r961764451
also adds an activation script to print the warning during activation
instead of during build, otherwise folks using the new CLI that hides
build logs by default might never see the warning.
This commit fixes a papercut in nixos-rebuild where people wanting to
switch to a specialisation (or test one) were forced to manually figure
out the specialisation's path and run its activation script - since now,
there's a dedicated option to do just that.
This is a backwards-compatible change which doesn't affect the existing
behavior, which - to be fair - might still be considered sus by some
people, the painful scenario here being:
- you boot into specialisation `foo`,
- you run `nixos-rebuild switch`,
- whoops, you're no longer at specialisation `foo`, but you're rather
brought back to the base system.
(it's especially painful for cases where specialisation is used to load
extra drivers, e.g. Nvidia, since then launching `nixos-rebuild switch`,
while forgetting that you're inside a specialisation, can cause some
parts of your system to get accidentally unloaded.)
I've tried to mitigate that by improving specialisations so that they
create a dedicated file somewhere in `/run/current-system` containing
the specialisation's name (which `nixos-rebuild` could then use as the
default value for `--specialisation`), but I haven't been able to come
up with anything working (plus it would be a breaking change then).
Closes https://github.com/NixOS/nixpkgs/issues/174065
* Will make it so that GHC.Paths's docdir NIX_GHC_DOCDIR points to an
actual directory.
* Documentation of all packages in the environment is available in
`$out/share/doc`.
This has previously been attempted in #76842 and reverted in #77442,
since documentation can collide when the libraries wouldn't (thanks to
the hash in the lib filename). `symlinkJoin` allows collision, so this
solution should be akin to #77523 (minus `buildEnv`, one step at a
time). `installDocumentation = false` restores the old behavior.
Collision in the documentation only happen if the dependency closure of
the given packages has more than one different derivation for the same
library of the very same version. I'm personally inclined not to claim
that our infrastructure does anything sensible in this case.
Additionally, the documentation is likely largely the same in such
cases (unless it is heavily patched).
Resolves#150666.
Resolves#76837.
Closes#150968.
Closes#77523.
This is a followup of #148921, to allow local builds when
`--target-host` is used again. It also documents the change in
behavior, regarding the specialty of the `localhost` value.
By removing the special handling of an empty `buildHost` and non empty
`targetHost`, this change also slightly alters the behavior of
`nixos-rebuild`.
Originally by specifying `--target-host target --build-host ""`, the
now removed special case would transform those arguments to
`--target-host target --build-host target`.
Now the empty `--build-host` would result in a local build.
Added the RFC42-style added the posibility to use
`services.dokuwiki.sites.<name>.settings' instead of passing a plain
string to `<name>.extraConfig`. ´<name>.pluginsConfig` now also accepts
structured configuration.
Move the manpage-to-URL mapping to `doc/manpage-urls.json` so that we can
reuse that file elsewhere, and generate the `link-manpages.lua` filter from
that file.
Also modify the Pandoc filter so that it doesn't wrap manpages that are
already inside a link.
Keeping a Lua filter is essential for speed: a Python filter would
increase the runtime `md-to-db.sh` from ~20s to ~30s (but Python is not
to blame; marshalling Pandoc types to and from JSON is a costly operation).
Parsing in Lua seems tedious, so I went with the Nix way.
There should be no reason to use this package as it's a remnant of
non-modular X. Chances are you do not want every single library it
used to pull in:
freetype fontconfig xorg.xorgproto xorg.libX11 xorg.libXt
xorg.libXft xorg.libXext xorg.libSM xorg.libICE
Just pick the ones you really need instead.
`nixpkgs` does not have any users of `xlibsWrapper`.
Closes: https://github.com/NixOS/nixpkgs/issues/194054
- Extensive documentation in NixOS manual
- Deterministic mode that fixes various identifiers relative to disk
partitions and filesystems in ext4 case
- UEFI variable recording
This commit upgrades headscale to the newest version, 0.17.0 and updates
the module with the current breaking config changes.
In addition, the module is rewritten to conform with RFC0042 to try to
prevent some drift between the module and the upstream.
A new maintainer, Misterio77, is added as maintainer.
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
Co-authored-by: Gabriel Fontes <hi@m7.rs>
Co-authored-by: Geoffrey Huntley <ghuntley@ghuntley.com>
* minio: add legacy fs version 2022-10-24T18-35-07Z
This allows users to migrate their data to versions that already removed
support for the legacy fs backend.
* Update nixos/doc/manual/release-notes/rl-2305.section.md
Co-authored-by: Florian Klink <flokli@flokli.de>
Document the `linux.override` way first, then `linuxManualConfig`.
Add a `linux.configEnv` passthru attribute for quickly getting a
`make nconfig`-ready shell.
Make "$out" more conformant to the bin/ lib/ share/ hirarchy
instead of messing up the user profile
with stuff like cmake/ config/ macros/ icons/ js/ tutorials/ ...
In this layout,
* `tutorials` is now under `share/doc/ROOT/tutorial`
* `cmake`, `font`, `icons`, `js` and `macro` is now under `share/root`
* `Makefile.comp` and `Makefile.config` in now under `etc/root`.
When running nixos-rebuild -I, the man page just said "-I path" which could be interpreted as
"just a path to nixpkgs", which in fact it actually has the same meaning as NIX_PATH.
This is now made clear in the manual, so that when grepping "-I" and "NIX_PATH" one quickly finds
the format of the option.
I don't know how to link to the "nix manual" as stated in the docbook, so I left that as it is.
Additionally, it wasn't clear to me how to actually build the man pages and view the changes I made.
That's now in the contributing-to-this-manual.chapter.md.
Avoids confusion: `vim-full`'s build-time features are configurable, but both
`vim` and `vim-full` are *customizable* (in the sense of user configuration).
I'm well aware that this issue is currently under discussion[1] and that
these things may change. Also, please don't misinterpret this as an
attempt to end the discussion.
This topic made it obvious that people are surprised by the way this
issue is handled and only finding out about this unwritten rule because
of asking is not a good state IMHO, so I decided to document the
following things:
* Right now we drop kernels as soon as they get out of maintenance (LTS
kernels even before the next stable NixOS that will exceed their
lifespan).
* The `latestCompatibleLinuxPackages` attribute from ZFS isn't
monotonic since latest only refers to the latest supported kernel.
* In fact `latestCompatibleLinuxPackages` doesn't seem to be documented
at all in the manual, so I also did that.
[1] https://discourse.nixos.org/t/aggressive-kernel-removal-on-eol-in-nixos/23097
Adds a new option for backup jobs `inhibitsSleep` which prevents
the system from going to sleep while a backup is in progress.
Uses `systemd-inhibit`, which holds a "lock" that prevents the
system from sleeping while the process it invokes is running.
This did require wrapping the existing backup script using
`writeShellScript` so that it could be run by `systemd-inhibit`.
When using the declarative shared folder configuration for resilio sync
it is now possible to pass a path from which to read the secret should
be read at runtime. The path will not be added to the nix store.
The 'secret' parameter to specify the secret directly is still
supported. This option will still store the secret in the nix store.
This commit follows the pattern described in this issue, for upstream
programs that do not provide support for setting a password using a
file: https://github.com/NixOS/nixpkgs/issues/24288
Add a section on ordering option definitions.
Also mention `mkDefault` in the section on `mkOverride`.
Clarify the code a bit by renaming `defaultPriority` to
`defaultOverridePriority` and introducing `defaultOrderPriority`.
The placement of this option under `nix` was misleading, as it is not
configuration of the Nix daemon, but rather configuration of the NixOS
boot process and how it mounts the Nix store. As such, make it an option
of `boot` to clarify what it actually affects, and imply that it will
only take effect on a reboot.
Since it no longer has the context of nix, adjust the name to include
it.
Packages built with `haskellPackages.callHackage` won't be rebuilt when
updating `all-cabal-hashes`.
The removed comment was keeping a reference to the `cabal2nix` call,
which itself depends on `all-cabal-hashes`, in order to keep this file
during a garbage collection.
The tradeoff is between:
- The current behavior: a mass rebuild, any change of `all-cabal-hashes`
triggers a rebuild of all the packages built with `callHackage` and
packages which depend on them. This can take hours, and may happen
after a "small" unrelated change (i.e. an user is bumping
`all-cabal-hashes` in order to use a new package from hackage). It
also have global impacts in a project (long rebuild in CI, new entries
in cache, developers need to fetch the new entries, ...). In this
context, `cabal2nix` entries are not garbage collected.
- The new behavior: No mass rebuild, but `cabal2nix` derivations need to
be recomputed after a garbage collection. This is usually fast (a few
seconds by call), linear with the number of calls and should not
happen a lot (i.e. users are not garbage collecting everyday).
See https://github.com/NixOS/nixpkgs/issues/194751 for details.
This also removes automatic enablement/mounting of instance store swap
devices and ext3 filesystems. This behaviour is strongly opinionated
and shouldn't be enabled by default.
The unionfs behaviour never took effect anyway, because the AMI
manifest path only exists for instance store-backed AMIs, which have
not been supported by nixpkgs since
84742e2293 (2019).
Enabling Wayland support by default prevents use of XWayland on Wayland
systems, while correctly falling back to X11 when Wayland is
unavailable in the current session.
With the current packaging many people unnecessarily rely on the
`firefox` attribute, which is suggested by nixos-generate-config, which
in turn makes their Firefox use XWayland, when it shouldn't, which
causes bugs with GNOME on Wayland:
https://discourse.nixos.org/t/firefox-all-black-when-first-launched-after-login/21143
Using the Wayland-enabled Firefox was tested on pure X11 systems by
contributors on the #nix-mozilla:nixos.org room and we are confident
this change will not cause severe regressions.
Even better, people can now toggle `MOZ_ENABLE_WAYLAND=<0|1>` in their
environment to override this decision, should they feel the need to do
so.
The `sparseCheckout` argument allows the user to specify directories or
patterns of files, which Git uses to filter files it should check-out.
Git expects a multi-line string on stdin ("newline-delimited list", see
`git-sparse-checkout(1)`), but within nixpkgs it is more consistent to
use a list of strings instead. The list elements are joined to a
multi-line string only before passing it to the builder script.
A deprecation warning is emitted if a (multi-line) string is passed to
`sparseCheckout`, but for the time being it is still accepted.
The nixos-generate-config command mentioned in the manual fails with error:
nixos-generate-config: no need to specify `/` with `--root`, it is the default
This was introduced in 611b8c4472
(#161034). Now, the command should be called without any arguments.
Relative paths are interpreted relative to the working directory, which
is currently unset and thus defaults to `/`. However we want to change
the working directory in a future release such that relative paths are
interpreted relative to `/var/lib/syncthing`.
Upon testing the change itself I realized that it doesn't build properly
because
* the `pname` of a php extension is `php-<name>`, not `<name>`.
* calling the extension `openssl-legacy` resulted in PHP trying to compile
`ext/openssl-legacy` which broke since it doesn't exist:
source root is php-8.1.12
setting SOURCE_DATE_EPOCH to timestamp 1666719000 of file php-8.1.12/win32/wsyslog.c
patching sources
cdToExtensionRootPhase
/nix/store/48mnkga4kh84xyiqwzx8v7iv090i7z66-stdenv-linux/setup: line 1399: cd: ext/openssl-legacy: No such file or directory
I didn't encounter that one before because I was mostly interested in
having a sane behavior for everyone not using this "feature" and the
documentation around this. My findings about the behavior with turning
openssl1.1 on/off are still valid because I tested this on `master` with
manually replacing `openssl` by `openssl_1_1` in `php-packages.nix`.
To work around the issue I had to slightly modify the extension
build-system for PHP:
* The attribute `extensionName` is now relevant to determine the output
paths (e.g. `lib/openssl.so`). This is not a behavioral change for
existing extensions because then `extensionName==name`.
However when specifying `extName` in `php-packages.nix` this value is
overridden and it is made sure that the extension called `extName` NOT
`name` (i.e. `openssl` vs `openssl-legacy`) is built and installed.
The `name` still has to be kept to keep the legacy openssl available
as `php.extensions.openssl-legacy`.
Additionally I implemented a small VM test to check the behavior with
server-side encryption:
* For `stateVersion` below 22.11, OpenSSL 1.1 is used (in `basic.nix`
it's checked that OpenSSL 3 is used). With that the "default"
behavior of the module is checked.
* It is ensured that the PHP interpreter for Nextcloud's php-fpm
actually loads the correct openssl extension.
* It is tested that (encrypted) files remain usable when (temporarily)
installing OpenSSL3 (of course then they're not decryptable, but on a
rollback that should still be possible).
Finally, a few more documentation changes:
* I also mentioned the issue in `nextcloud.xml` to make sure the issue
is at least mentioned in the manual section about Nextcloud. Not too
much detail here, but the relevant option `enableBrokenCiphersForSSE`
is referenced.
* I fixed a few minor wording issues to also give the full context
(we're talking about Nextcloud; we're talking about the PHP extension
**only**; please check if you really need this even though it's
enabled by default).
This is because I felt that sometimes it might be hard to understand
what's going on when e.g. an eval-warning appears without telling where
exactly it comes from.
* s/NextCloud/Nextcloud/g
* `enableBrokenCiphersForSSE` should be enabled by default for any NixOS
installation from before 22.11 to make sure existing installations
don't run into the issue. Not the other way round.
* Update release notes to reflect on that.
* Improve wording of the warning a bit: explain which option to change
to get rid of it.
* Ensure that basic tests w/o `enableBrokenCiphersForSSE` run with
OpenSSL 3.
Allow building other than Legacy-BIOS-only Proxmox images.
Default is unchanged.
To build UEFI proxmox image use:
proxmox.qemuConf.bios = "ovmf";
(default is "seabios")
To build image bootable using both "seabios" and "ovmf" use:
partitionTableType = "hybrid";
BIOS can be switched in Proxmox between "seabios" and "ovmf" and VM still boots.
(GRUB2-only, systemd-boot does not boot under "seabios")
To build systemd-boot UEFI image:
proxmox.qemuConf.bios = "ovmf";
boot.loader.systemd-boot.enable = true;
Support will be dropped on 01 Jan 2023[1]. Normally we'd keep it around
until then, but considering that it's an LTS kernel it may be better to
do it before 22.11 to make sure there are no unpleasant surprises.
Closes#199933
[1] https://endoflife.date/linux
Percona Server for MySQL 5.6 is no more maintained due to the EOL of MySQL 5.6.
See https://www.percona.com/downloads/Percona-Server-5.6/LATEST/.
A bit hard to list all the potential security issues affecting it but CVE-2021-27928
should be one of them.
- Update download URLs
- Replace "USB stick"/"USB Drive" with "USB flash drive" as that seem more correct
https://en.wikipedia.org/wiki/USB_flash_drivehttps://elementary.io/docs/installation#choose-operating-system
- Don't mention CD as easiest option anymore,
as all modern systems should be able to boot from USB,
but many don't have a CD drive. Burning CDs is also usually wasteful as you
can't burn them again.
- Remove link to NixOS Wiki (Making_the_installation_media) as it is not needed
- Add Etcher and USBImager as graphical tools to create install drive
- Make dd command consistent and use block size of 4 MB for faster flashing
- More consistent text
- Add instructions for "Booting from the install medium"
Inspired by 9a91b0f495/docs/installation.md (booting-from-the-install-drive-booting-from-the-installation-medium-clear-float-2)
- Add instructions for "Graphical Installation"
- Restructure headings and anchors for "Manual Installation"
- Adding legacy anchors for "Manual Installation" to not break links
Co-authored-by: j-k <dev@j-k.io>
Co-authored-by: Sandro <sandro.jaeckel@gmail.com>
Co-authored-by: Robert Schütz <github@dotlambda.de>
Co-authored-by: Jörg Thalheim <Mic92@users.noreply.github.com>
Co-authored-by: Thiago Kenji Okada <thiagokokada@gmail.com>
This will add `passthru.schema_version` to be used as default value for
the adguardhome module.
It will also update the `update.sh` to keep the `schema_version` in sync
with the version by inspecting the sourcecode.
This might break existing configs, if they use deprecated values that don't
appear in newer schema_versions and schema_version wasn't set explicitly.
Explicit declarations of schema_version always have higher priority.
This also removes the `host` and `config` settings in favour of using the
appropriate `settings`.
Fixes#173938
Co-authored-by: Sandro <sandro.jaeckel@gmail.com>
- Previously PolyMC's removal was counted as a release highlight
- It probably shouldn't be, as it's more a notable change rather than a
highlight
- Thanks @Ma27 for noticing this
This commit refactors `services.grafana.provision.datasources` towards
the RFC42 style. To preserve backwards compatibility, we have to jump
through a ton of hoops, introducing esoteric type signatures and bizarre
structs. The Grafana module definition should hopefully become a lot
cleaner after a release cycle or two once the old configuration style is
completely deprecated.
This commit refactors `services.grafana.provision.dashboards` towards
the RFC42 style. To preserve backwards compatibility, we have to jump
through a ton of hoops, introducing esoteric type signatures and bizarre
structs. The Grafana module definition should hopefully become a lot
cleaner after a release cycle or two once the old configuration style is
completely deprecated.
- Previously PolyMC was the suggested replacement for MultiMC
- As PolyMC is marked as insecure and prismlauncher is a replacement,
this commit suggests using it instead
The actual p4 command is open-source software released under the
2-clause BSD license, so we can build it here (for pretty much every
architecture we support!) and include it in the cache.
This change removes the server-side commands from this package, but they
are now available as part of a separate p4d package instead. (The server
package remains unfree.)
As an added bonus, we can also include the libraries and headers for the
C/C++ API, which will allow us to package any software that uses
Perforce as a library in the future.
This binary was provided by the `cosign` package until now but it is in
the process of being removed, see https://github.com/sigstore/cosign/pull/2019
Since it might be removed during the 22.11 cycle we drop it
preventively. This will make possible security backports easier if we
need them.
Deprecate haskell.lib{,.compose}.generateOptparseApplicativeCompletion*
in favor of the newly added
haskell.packages.*.generateOptparseApplicativeCompletions (plural!)
which takes into account whether we are cross-compiling or not. If we
are, generating completions is disabled, since we can't execute software
built for a different platform.
The move is necessary, so we can receive the /same/ stdenv as the
package we are overriding in order to accurately check whether we can
execute produced binaries.
Resolves#174040.
Resolves#49648.
This caused too many downstream projects to break, so we are reverting
this change for now, until further transition fixes are in place.
See discussion in https://github.com/NixOS/nixpkgs/pull/191171
This reverts part of 6762de9a28
Optional functionality of AusweisApp2 requires an UDP port to be opened.
The module allows for convenient configuration and serves as documentation.
See also https://github.com/NixOS/nixpkgs/issues/136269
deprecate literalDocBook by adding a warning (that will not fire yet) to
its uses and other docbook literal strings by adding optional warning
message to mergeJSON.
Because of long standing bugs and stability issues & an
uncollaborative upstream there has been talk on the emacs-devel
mailing list to switch the default toolkit to
Lucid (https://lists.gnu.org/archive/html/emacs-devel/2022-08/msg00752.html).
The GTK build also has issues with Xinput2, something that both we and
upstream want to enable by default in Emacs 29.
This situation has prompted me to use both Lucid an no-toolkit (pure X11) Emacs
as a daily driver in recent weeks to evaluate what the
advantages/drawbacks are and I have concluded that, at least for me,
switching the toolkit to Lucid is strictly an upgrade.
It has resulted in better stability (there are far fewer tiny UX
issues that are hard to understand/identify) & a snappier UI.
On top of that the closure size is reduced by ~10%.
In the pure X11 build I noticed some unsharpness around fonts so this
is not a good default choice.
As with everything there is a cost, and that is uglier (I think most
would agree but of course this is subjective) menu bars for
those that use them and no GTK scroll bars.
For anyone who still wants to use GTK they could of course still
choose to do so via the new `emacs-gtk` attribute but I think this
is a bad default.
A note to Wayland users:
This does not affect Wayland compatibility in any way since that will
already need a PGTK build variant in the future.
- Replace misleading docs.
- Add new assertions to let configurations make more sense.
- Add clusterInit flag.
- Add some more docs about HA and non-HA modes setup.
- Improve multi-node tests for HA mode.
Fix https://github.com/NixOS/nixpkgs/issues/182085
This option is based on a recommendation from a page last updated in
2014 (see https://www.freedesktop.org/wiki/Software/Glamor/), and it
is not necessary anymore.
Also, it did the wrong thing: it forced DRI2, but Glamor should also
work with DRI3, that is a better option most of the time. So let's
remove this option, folks that still want to force this manually can do
so in other ways.
Enable keter module
Keter is an apploader which:
1. has the old app running on a port.
2. loads a new one, and wait for that to complete
3. switches the old with the new one once the new one finished loading.
It supports more functionality but this use case
is the primary one being used by supercede.
Adds keter as a module to nixos.
Currently keter is unusable with nix,
because it relies on bundeling of a tar and uploading that to a specific folder.
These expressions automate these devops tasks,
with especially nixops in mind.
This will work with versions above 1.8
The test seems to work.
This uses a new version of keter which has good
support for status code on error pages.
We're using this config at production at supercede
so it should be fine.
Squash log:
==========
mention keter in changelog
Update generated release notes
Always restart keter on failure
This is a little bit of extra stability in case keter crashes.
Which can happen under extreme conditions (DoS attacks).
Update nixos/doc/manual/release-notes/rl-2205.section.md
Co-authored-by: ckie <25263210+ckiee@users.noreply.github.com>
Update nixos/modules/module-list.nix
Co-authored-by: ckie <25263210+ckiee@users.noreply.github.com>
Remove sanitization
don't put domain in as a string
Update nixos/tests/keter.nix
Co-authored-by: ckie <25263210+ckiee@users.noreply.github.com>
add jappie as module maintainer
Use type path instead of two seperate options
Fix generated docs
added test machinery to figure out why it's failing
Fix the test, use console output
run nixpkgs-fmt on all modules
Inline config file.
This get's rid of a lot of inderection as well.
Run nix format
remove comment
simplify executable for test
delete config file
add config for keter root
Remove after redis clause
set keter root by default to /var/lib/keter
Update nixos/modules/services/web-servers/keter/default.nix
Co-authored-by: ckie <25263210+ckiee@users.noreply.github.com>
Update nixos/modules/services/web-servers/keter/default.nix
Co-authored-by: ckie <25263210+ckiee@users.noreply.github.com>
Update nixos/modules/services/web-servers/keter/default.nix
Co-authored-by: ckie <25263210+ckiee@users.noreply.github.com>
fix nit
add newlines
add default text and move description in a long description
Delete rather obvious comment
fix release db thing
remove longDescription and put it in a comment instead
change description of mkEnalbeOption
explain what keter does by using the hackage synopsis
set domain to keterDomain and same for executable
move comment to where it's happening
fix type error
add formatting better comment
try add seperate user for keter
Revert "try add seperate user for keter"
This reverts commit d3522d36c96117335bfa072e6f453406c244e940.
Doing this breaks the setup
set default to avoid needing cap_net_bind_service
remove weird comment
use example fields
eleborated on process leakage
Update nixos/modules/services/web-servers/keter/default.nix
Co-authored-by: ckie <25263210+ckiee@users.noreply.github.com>
run nixpkgs-fmt
update docs
Fix formatting, set keter package by default
format our little nixexpr
replace '' -> " where possible
drop indent for multiline string
make description much shorter
regen docs database
This was enabled by default in 18a7ce76fc
with the reason that it would be "useful regardless of the desktop
environment.", which I'm not arguing against.
The reason why this should not be enabled by default is that there are a
lot of systems that NixOS runs on that are not desktop systems.
Users on such systems most likely do not want or need this feature and
could even consider this an antifeature.
Furthermore, it is surprising to them to find out that they have this
enabled on their systems.
They might be even more surprised to find that they have polkit enabled
by default, which was a default that was flipped in
a813be071c. For some discussion as to why
see https://github.com/NixOS/nixpkgs/pull/156858.
Evidently, this default is not only surprising to users, but also module
developers, as most if not all modules for desktop environments already
explicity set services.udisks2.enable = true; which they don't need to
right now.
`cosigned` is no more part of the cosign repository and it has been moved
into a `sigstore/policy-controller` repository. A new package should probably
be created to replace it.
https://github.com/sigstore/cosign/releases/tag/v1.10.0
* Update to the latest upstream version of pass-secret-service that includes
systemd service files.
* Add patch to fix use of a function that has been removed from the Python
Cryptography library in NixOS 22.05
* Install systemd service files in the Nix package.
* Add NixOS test to ensure the D-Bus API activates the service unit.
* Add myself as a maintainer to the package and NixOS test.
* Use checkTarget instead of equivalent custom checkPhase.
Due to lack of maintenance. It is not compatible with the default
Python version (due to the tornado 5) dependency, and doesn't look
like it will be any time soon.
I was under the impression that setting `services.redis.servers.<name>.save = []` would disable RDB persistence as no schedule would mean no persistence. However since the code did not handle this case specially it actually results in no `save` setting being written and the internal Redis default is used.
This patch handles the empty case to disable RDB persistence.
Disabling RDB persistence is useful in a number of scenarios:
1. Using Redis in a pure-cache mode where persistence is not desired.
2. When using the (generally superior) AOF persistence mode this file is never read so there is little point to writing it.
3. When saving is handled manually
For more information see https://redis.io/docs/manual/persistence/
This is a breaking change as the user may have been relying on `[]` using Redis defaults. However I believe that updating the behaviour for the next release is beneficial as IMHO it is less surprising and does what the user would expect. I have added release notes to warn about this change.
By writing the unchecked outputs before checking them, they will
be written to a store path, which appears in the log, and which
sticks around even if the build fails. Eventually it is GCed, but
until then, you can open the file.
If you run it in a terminal+editor combination like VSCode, the
failure location is just one Ctrl+click away.
- Add a module for the thunar file manager, which depends on the xfconf dbus service, and also has a dbus service and a systemd unit.
- Renames the option services.xserver.desktopManager.xfce.thunarPlugins to programs.thunar.plugins.
Riak have been updated a lot since the version 2.2 (now 3.0.10) but
has seen no updated to the package. This is at this point
a problem forcing us to maintain old versions of erlang.
We would be happy to re accept a newer version of Riak if someone want
to spend the time to set it up.
Qt4 is on it's way out, according to
https://github.com/NixOS/nixpkgs/pull/174634
Barco's ClickShare driver/client requires Qt4;
an update isn't in sight anywhere.
To prepare for the removal of Qt4,
the commit at hand removes the
ClickShare package and its NixOS module.
The release notes are appended with a hint about the
removal and some alternatives that might help users
that are still in need of the driver/client functionality.
The previous version from review.coreboot.org is no longer available at
that address. This reverts to using the upstream, which is also a
rewrite and currently in beta. The full release is expected before
22.11.
Very confusingly, the `isPowerPC` predicate in
`lib/systems/inspect.nix` does *not* match `powerpc64le`!
This is because `isPowerPC` is defined as
isPowerPC = { cpu = cpuTypes.powerpc; };
Where `cpuTypes.powerpc` is:
{ bits = 32; significantByte = bigEndian; family = "power"; };
This means that the `isPowerPC` predicate actually only matches the
subset of machines marketed under this name which happen to be 32-bit
and running in big-endian mode which is equivalent to:
with stdenv.hostPlatform; isPower && isBigEndian && is32bit
This seems like a sharp edge that people could easily cut themselves
on. In fact, that has already happened: in
`linux/kernel/common-config.nix` there is a test which will always
fail:
(stdenv.hostPlatform.isPowerPC && stdenv.hostPlatform.is64bit)
A more subtle case of the strict isPowerPC being used instead of the
moreg general isPower accidentally are the GHC expressions:
Update pkgs/development/compilers/ghc/8.10.7.nix
Update pkgs/development/compilers/ghc/8.8.4.nix
Update pkgs/development/compilers/ghc/9.2.2.nix
Update pkgs/development/compilers/ghc/9.0.2.nix
Update pkgs/development/compilers/ghc/head.nix
Since the remaining legitimate use sites of isPowerPC are so few, remove
the isPowerPC predicate completely. The alternative expression above is
noted in the release notes as an alternative.
Co-authored-by: sternenseemann <sternenseemann@systemli.org>
* origin/staging-next: (62 commits)
Re-Revert "lua: fix on darwin by using makeBinaryWrapper (#172749)"
openldap: fix cross-compilation
makeBinaryWrapper: fix codesign on aarch64-darwin
python3Packages.ldap: fix linking with openldap 2.5+
Revert "lua: fix on darwin by using makeBinaryWrapper (#172749)"
wine: enable parallel build again
pkgsi686Linux.gdb: fix formatting for 32-bit systems
gtk4: Fix incorrect merge
nixos/openldap: use upstream unit defaults
openldap: update maintainers
openldap: 2.4.58 -> 2.6.2
Revert "Add mingwW64-llvm cross-system."
lua: fix on darwin by using makeBinaryWrapper (#172749)
python310Packages.python-mimeparse: execute tests
pandas: fix darwin build
gtk3: 3.24.33 -> 3.24.33-2022-03-11
gtk4: patch fixing g-c-c crashes
e2fsprogs: patch for CVE-2022-1304
firefox-unwrapped: fix cross compilation
rustc: expose correct llvmPackages for cross compile
...
Since the list only gates the platforms the nixpkgs flake exposes
packages to build on, the `hydra` label made little sense. It was also
only used for this purpose, so the `tier*` attributes were largely
unnecessary.
To reflect the intention more accurately, we expose
`lib.systems.flakeExposed` and use it to gate flake.nix's system list.
* Add an option services.nextcloud.nginx.hstsMaxAge for setting the max-age
directive of the Strict-Transport-Security HTTP header.
* Make the Strict-Transport-Security HTTP header in the Nginx virtualhost block
dependant upon the option services.nextcloud.https instead of
services.nextcloud.nginx.recommendedHttpHeaders, as this header makes no sense
when not using HTTPS. (Closes#169465)
$ parted /dev/nvme1n1 -- mkpart primary linux-swap -8GiB 100%
Warning: The resulting partition is not properly aligned for best performance: 3108850352s % 2048s != 0s
Ignore/Cancel?
Information: You may need to update /etc/fstab.
When using GB than parted seems to round up itself.
This has a number of benefits such as that applying service limits will
actually work since there isn't a layer of indirection (the Docker daemon)
between the systemd service and the container runtime.
This was an annoyance for me as I have editor hooks cleaning up
trailing white space which lead to regenerating parts of the release notes unnecessarily.
We need to move NixOS containers somewhere else so these don't clash
with Podman, Skopeo & other container software in the libpod &
cri-o/cri-u/libcontainer ecosystems.
The state directory move is not strictly a requirement but is good for
consistency.
- Clarify that shellopts are set in every `execute` call (rather than
only `succeed`).
- Add documentation for the `timeout` parameter and its default values.
`fcitx5` and `service.earlyoom` rely on use XDG autostart files to start.
But for X session with only window manager and no desktop manager
(`none` is used), no one can start them.
This options is added to run these autostart files for sessions without
desktop manager to make other services just work.
Until now, this script has used the version of pandoc from unstable.
This means that running the script on the same version of Nixpkgs
could produce different results, and meant that when Pandoc's output
was changed, random PRs were changing the whole manual when they ran
the script to regenerate docs[1][2].
Here I've changed the manual to use a consistent version of pandoc —
the one from the latest release tag, which will avoid this problem in
future. This will avoid this problem in future. The only time we'll
need to worry about pandoc output changes is when we bump the version
used in this script.
I also considered using the version from the current Nixpkgs branch,
but decided against it as it's unlikely that e.g. the person bumping
Pandoc will remember to regenerate the manual.
[1]: https://github.com/NixOS/nixpkgs/pull/162550
[2]: https://github.com/NixOS/nixpkgs/pull/168535
With version 17 of Keycloak, the Wildfly based distribution was
deprecated in favor of the one based on Quarkus. The difference in
configuration is massive and to accommodate it, both the package and
module had to be rewritten.
This describes how to build your own installer medium with some custom
firmware/drivers, using an Intel MacBook as an example - on which WiFi
doesn't work out of the box, due to it being nonfree.
Fixes#15162.
Co-authored-by: Lucas Hoffmann <lucc@users.noreply.github.com>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Without configuring the block size a default of 512 bytes is used, which can
slow down the transfer speed massively.
In a test I've done with a semi-decent USB stick, I only get a transfer speed
of around 180 KB/sec when not specifying the block size but see 27 MB/sec when
setting the block size to 1 MB. This makes the transfer of the minimal
installation ISO take half a minute instead of an hour.
using freeform is the new standard way of using modules and should replace
extraConfig.
In particular, this will allow us to place a condition on mails
Lo and behold, we're finally catching up with Mozillas very own firefox
build in terms of speed.
PGO is an optimization technique in which in a first step we create a
build that supports instrumentation, meaning we can use it to create a
profile of how the browser behaved during usage. Then in a second pass
we create the final build that uses the acquired profiling data to
optimize the browser for the workload it actually received during
profiling.
The downside is that with PGO we now need to build Firefox twice, which
increases the build time from around 20 minutes to roughly 50 minutes.
In the Speedometer 2.0 benchmark multiple tests could see a
responsiveness improvemeant around 20-25%, which makes the increased
build time well worth it.
Sadly this benefit seems limited to x86_64-linux, builds on
aarch64-linux get stuck during profiling and I haven't found out why.
Finally, after a long time, we can say:
Closes: #76484
Supersedes: #129503
The current wrapper only includes vim, gvim and the man pages
(optionally). This rewrite distinguishes two scenarios, which I expect
cover the majority of use cases:
- standalone mode, when `name != "vim"`, means the user already has a
vim in scope and only wants to add a customized version with a
different name. In this case we only include wrappers for `/bin/*vim`.
- non-standalone mode, when `name == "vim"`, means the user expects a
normal vim package that uses the specified configuration. In this case
we include everything in the original derivation, with wrappers for
all the executables that accept a vimrc.
When a NixOS system uses flakes, i.e., /etc/nixos/flake.nix exists, it
is impossible to use nixos-rebuild to build a pre-flake
configuration.nix. Of course, one can directly use nix command to
build the configuration, but not everybody remembers the correct nix
options to do that.
With the new option, it is possible to build a pre-flake configuration
with command like this:
nixos-rebuild build-vm -I nixos-config=./vm.nix --no-flake
The option might be useful for people following older pre-flake
tutorials on a flake-based system.
hostNames being deprecated makes configuring hosts with multiple keys a
pain. including the attr name of the entry in the host name list is a
nice convenience though, so we'll retain it and clarify the
documentation on how the actual host name list for an entry is put
together.
* _7zz: correct license and remove p7zip dependency
The code under Compress/Rar* is licensed under a specific unRAR license
Also Compress/LzfseDecoder.cpp is covered by BSD3
The unRAR code is removed from the `.tar.xz` since the license posits you
agree or remove the code from your hard drive
This adds some complexity to updating 7zz so there is also an update
script
Meta has been updated and tweaked
Source is now downloaded from sourceforge in the `.tar.xz` version to
avoid depending on p7zip
* _7zz: add notice of the license updates and optional unRAR licenced code
If `services.tor.client.enable` is set to false (the default), the `SOCKSPort` option is not added to the torrc file but since Tor defaults to listening on port 9050 when the option is not specified, the tor client is not actually disabled. To fix this, simply set `SOCKSPort` to 0, which disables the client.
Use `mkForce` to prevent potentially two different `SOCKSPort` options in the torrc file, with one of them being 0 as this would cause Tor to fail to start. When `services.tor.client.enable` is set to false, this should always be disabled.
pam-ussh allows authorizing using an SSH certificate stored in your
SSH agent, in a similar manner to pam-ssh-agent-auth, but for
certificates rather than raw public keys.
it's really easy to accidentally write the wrong systemd Exec* directive, ones
that works most of the time but fails when users include systemd metacharacters
in arguments that are interpolated into an Exec* directive. add a few functions
analogous to escapeShellArg{,s} and some documentation on how and when to use them.
The current logic assumes that everything that isn't a derivation is a
store path, but it can also be something that's *coercible* to a store
path, like a flake input.
Unnecessary uses of `lib.toDerivation` result in errors in pure evaluation
mode when `builtins.storePath` is disabled.
Also document what a `package` is.
Follow-up on https://github.com/NixOS/nixpkgs/pull/161426.
Explain why having legacy iptables rules installed can lead to confusing
firewall behaviour, and provide some guidance on how to fix this.
zsh-autosuggestions supports having fallback strategies expressed
through the ZSH_AUTOSUGGEST_STRATEGY array. For example,
`ZSH_AUTOSUGGEST_STRATEGY=(history completion)`. We should also support
this.
This adds an option `services.taskserver.openFirewall` to allow the user
to choose whether or not the firewall port should be opened for the
service. This is no longer the case by default.
See also https://github.com/NixOS/nixpkgs/issues/19504.
This type correctly merges multiple option types together while also
annotating them with file information. In a future commit this will be
used for `_module.freeformType`
Makes all options rendered in the manual throw an error if they don't
have a type specified.
This is a follow-up to #76184
Co-Authored-By: Silvan Mosberger <contact@infinisil.com>
