Currently there is an issue with $PATH & parallel causing build errors.
It’s probably best to just remove the dependency where bash forking is
good enough here.
Currently the installWrapper warning is issued if sudo (and sudo-rs)
aren't installed. This is fine, except we get the warning even if we
explicitly turn off installWrapper -- say, for this very reason!
Rather than warning on every build until either sudo is installed or
Akkoma is uninstalled, only warn if cfg.installWrapper is true.
the nix `recommendedProxySettings` optiononly takes effect if `proxyPass`
is set, but since we manually invoke `proxy_pass` inside nginx we need
to also manually specify proxy settings. failing to do so leads to
symptoms such as "Incoming activity has invalid signature".
see: <https://github.com/LemmyNet/lemmy/issues/3273>
* PHP 8.3 seems supported, so let's go for it!
* The conditions for which Nextcloud will be the default were bogus: for
<24.11 I'd suggest to go for nextcloud29 already. The people on
unstable relying on the condition were on nextcloud28 so the upgrade
will work fine.
Also, it's unstable, so such upgrades are to be expected IMHO.
* Update the release notes to reflect that the new default is Nextcloud
29 and warn that only one major upgrade at a time can be done.
Prior to this patch, FreshRSS fails to load with an initial
`authType = "none"` setting, instead providing an error:
"Error during context user init!"
To fix this, this patch changes the freshrss-config service to
setup the initial `defaultUser` when `authType = "none"`
is configured.
these changes were generated with nixq 0.0.2, by running
nixq ">> lib.mdDoc[remove] Argument[keep]" --batchmode nixos/**.nix
nixq ">> mdDoc[remove] Argument[keep]" --batchmode nixos/**.nix
nixq ">> Inherit >> mdDoc[remove]" --batchmode nixos/**.nix
two mentions of the mdDoc function remain in nixos/, both of which
are inside of comments.
Since lib.mdDoc is already defined as just id, this commit is a no-op as
far as Nix (and the built manual) is concerned.
new versions of akkoma require the upload base url to be specified in
order for updates to work properly.
this will be a breaking change in 24.05, but for now a reasonable
default is set.
- new maxUploadSize option
- new dataDir option (with ReadWritePaths systemd support)
- admin page reports correct free disk space (instead of /nix/store)
- fix example configuration in documentation
- now podcast creation and file upload are tested during NixOS test
- move castopod from audio to web-apps folder
- verbose logging from the browser test
The main idea behind that was to be able to do more sophisticated
merging for stuff that goes into `postgresql.conf`:
`shared_preload_libraries` is a comma-separated list in a `types.str`
and thus not mergeable. With this change, the option accepts both a
comma-separated string xor a list of strings.
This can be implemented rather quick using `coercedTo` +
freeform modules. The interface still behaves equally, but it allows to
merge declarations for this option together.
One side-effect was that I had to change the `attrsOf (oneOf ...)` part into
a submodule to allow declaring options for certain things. While at it,
I decided to move `log_line_prefix` and `port` into this structure as
well.
The postgresql runs on a different node than my mastodon itself. Sometimes when
rebooting the entire host it can happen that mastodon gets started
before the DB[1] is up. In that case `mastodon-init-db.service` ran
through with the following log output:
2024-03-07 15:30:56.856
Migrating database (this might be a noop)
2024-03-07 15:30:56.856
/nix/store/xzm7www0qb7jg5zrgg7knynckx5yhki9-unit-script-mastodon-init-db-start/bin/mastodon-init-db-start: line 9: [: -eq: unary operator expected
It seems wrong to me to have this unit pass if the DB isn't even up,
especially with such an error.
This patch now checks if the exit code of the psql check was non-zero
and fails the entire unit. A retry can be implemented e.g. with
Restart/RestartSec then (which is more elegant than adding a while/sleep
loop anyways) like this:
systemd.services.mastodon-init-db = {
serviceConfig = {
Restart = "on-failure";
RestartSec = "5s";
RestartMode = "direct";
RemainAfterExit = true;
};
unitConfig = {
StartLimitBurst = 5;
StartLimitIntervalSec = "60";
};
};
Also using `-t --csv` now to not render the column name and to not
render a table so we don't need to rely on the format of psql (and parse
it with `sed(1)`).
[1] I added a script that blocks until postgres is there in the meantime
though.
Previously, pdftk (part of the ticket, badge, ... generation pipeline)
would fail with:
```
Error occurred during initialization of VM
Failed to mark memory page as executable - check if grsecurity/PaX is enabled
```
Thise caused pdf generation to fail.
Since pdftk is a java application and, according to systemd.exec(5),
> Note that [MemoryDenyWriteExecute=] is incompatible with programs and
> libraries that generate program code dynamically at runtime, including
> JIT execution engines, executable stacks, and code "trampoline" featu
> re of various C compilers.
Disabling `MemoryDenyWriteExecute=` fixes it.
Fix the alias for displaying media.
Also the more_set_headers for Content-Disposition was invalid and broke
browsers. While I was at it, I also quoted the other more_set_headers
directives.
Prefer setting the whitelisted bridges through the generic configuration
method. Removes the need for a whitelist.txt file.
Preserves backwards compatibility by taking the same values and
essentially just renaming the config option.
Preserve the default value for the filecache path, but also allow
modifying it, adapting the tmpfiles rule to create the directory with
the right permissions.
Co-authored-by: Sandro <sandro.jaeckel@gmail.com>
This allows managing rss-bridge's config with nix.
It leverages the environment variable way of setting the config options,
introduced quite [some time ago](https://github.com/RSS-Bridge/rss-bridge/pull/2100)
It is the only existing way to set config options independent of the
document root, and upstream is [hesitant](https://github.com/RSS-Bridge/rss-bridge/pull/3842)
to change the config loading methods.
Co-authored-by: Sandro <sandro.jaeckel@gmail.com>
The required nginx configuration is now really simple, and e.g. SSL/ACME
already required the user to interact with `services.nginx.virtualHosts`.
Therefore, and to reduce complexity, we now leave the web server
configuration to the user.
right now, we have php81 and php (which points to php82), which means that:
- php-fpm uses php81
- the update preStart uses php81
- the actual updater uses php82
Or another way to see it:
netbox_3_7: init at 3.7.1
Make NetBox 3.7 the default version if stateVersion >= 24.05,
switch upgrade test to test upgrade from 3.6 to 3.7,
remove clearcache command for >=3.7.0,
make reindex command mandatory
Closes#169733
The issue is that Nextcloud fails to start up after a GC because the
symlink from `override.config.php` is stale.
I'm relatively certain that this is not a bug in the Nix GC - that
would've popped up somewhere else already in the past years - and one of
the reporters seems to confirm that: when they restarted
`nextcloud-setup.service` after the issue appeared, an
`override.config.php` pointing to a different hash was there.
This hints that on a deploy `nextcloud-setup` wasn't restarted properly
and thus replacing the symlink update was missed. This is relatively
hard to trigger due to the nature of the bug unfortunately (you usually
keep system generations for a few weeks and you'll need to change the
configuration - or stdenv - to get a different `override.config.php`),
so getting pointers from folks who are affected is rather complicated.
So I decided to work around this by using systemd-tmpfiles which a lot
of other modules already utilize for this use-case. Now,
`override.config.php` and the directory structure aren't created by
`nextcloud-setup`, but by `systemd-tmpfiles`.
With that, the structure is guaranteed to exist
* on boot, since tmpfiles are always created/applied then
* on config activation, since this is done before services are
(re)started which covers the case for new installations and existing
ones.
Also, the recursive `chgrp` was used as transition tool when we switched
from `nginx` as owning group to a dedicated `nextcloud` group[1][2], but
this was several releases ago, so I don't consider this relevant
anymore.
[1] fd9eb16b24
[2] ca916e8cb3
The Nextcloud admin guide says that output buffering must be turned off
or otherwise PHP will return memory-related errors [1]. As the default
value for this PHP setting is 4096 and thus enabled the Nextcloud setup
is thus misconfigured by default. This misconfiguration will be shown in
the "Security & setup warnings" dialog for the administrator.
Fix this misconfiguration by setting "output_buffering=0" by default.
[1]: https://docs.nextcloud.com/server/stable/admin_manual/configuration_files/big_file_upload_configuration.html#configuring-php
Closes#277206
The bug mentioned above was a symptom of the issue fixed here: when
opening the `forms` app which is installed via `extraApps` (or the
app store) the site wouldn't work because `.mjs` files had the wrong
Content-Type.
The actual problem got fixed already[1], however this config was not
used for stuff from `/nix-apps` & `/store-apps` which had their own
location section with only a `root ;` statement.
In fact, this setup isn't strictly supported by Nextcloud upstream[2],
so to fix this for good, I decided to follow the upstream suggestion for
app directories outside the server root, i.e. linking them back into the
store path.
This means that the module generates a new derivation now with
* `services.nextcloud.package` linked into it via `lndir`.
* under `nix-apps` is a symlink to the link farm containing all apps
from `services.nextcloud.extraApps`.
* under `store-apps` is a symlink to `/var/lib/nextcloud/store-apps`.
Since this is only used in the NixOS module that also configures this
location for imperatively installed apps, this seems an OK thing to
do.
Successfully tested the change on a productive Nextcloud 28.0.1 with
several apps installed via `extraApps` (`forms`, `cospend`, `maps`,
`user_saml` and a few more).
[1] 292c74c7a9
[2] https://docs.nextcloud.com/server/28/admin_manual/apps_management.html#using-custom-app-directories
This makes sure we don't need any workarounds for running Invidious with a local
PostgreSQL database.
Changing the default user should be fine as the new init script for PostgreSQL automatically
creates the new user and changes the existing database's owner to the new user. The old user
will still linger and must be removed manually.
See also: https://github.com/NixOS/nixpkgs/pull/266270
This fixes the following eval error:
```
error: nodePackages.node-red cannot be found in pkgs
```
when having `services.node-red.enable = true;` without specifying
`services.node-red.package`, just like the nixos VM test.
Follow-up of f509382c11, which attempted
to fix this as well.
Breakage introduced in 0a37316d6c.
* Always use PHP 8.2: at the time of writing, Nextcloud also suggests to
use 8.2 rather than 8.3 in the manual for v28.
One contributing factor is probably that all plugins need new releases
to declare PHP 8.3 support.
* Fix upgradeWarning for installing v27 now that v28 is out.
* Drop upgrade warning for v24. This one is EOL for quite a while
already, so right now everybody should've switched (or carefully
studied the release notes in case they were upgrading from <23.05) and
we can clean up the module a little bit.
v25 was dropped not so long ago, so if it's still referenced (because
somebody didn't declare `services.nextcloud.package` and has
`system.stateVersion = "22.11";`) it's appropriate to still give a
specialized error.
This commit introduces the possibility to optionally enable the Jitsi
Gateway to SIP (jigasi) module. SIP credentials can be defined in
`services.jigasi.environmentFile`.
I was using a 23.11 package on a NixOS 23.05 system and this caused the
python that was used in gunicorn to differ from the python the postgres
lib was linked against.
Probably no one ever tested this, mediawiki tries to create the database inside the read-only
package. There might be a proper fix but for now it's better to not advertise unsupported options.
Invidious uses a strange setup where the database name is different from the system username
for non-explicit reasons.
Because of that, it makes it hard to migrate it to use `ensureDBOwnership`, we leave it to Invidious' maintainers
to pick up the pieces.
Mobilizon can have a custom database username and it is not trivial to sort out how to remove this.
In the meantime, for the upcoming 23.11 release, I apply the classical workaround
and defer to Mobilizon's maintainers.
This changes
* the plausible HTTP web server
to be listening on localhost only, explicitly.
This makes Plausible have an explicit safe default configuration,
like all other networked services in NixOS.
For background discussion, see: https://github.com/NixOS/nixpkgs/issues/130244
As per my upstream Plausible contribution
(https://github.com/plausible/analytics/pull/1190)
Plausible >= 1.5 also defaults to listening to localhost only;
nevertheless, this default should be stated explicitly in nixpkgs
for easier review and independence from upstream changes, and
a NixOS user must be able to configure the
`listenAddress`, as there are valid use cases for that.
Also, disable
* the Erlang Beam VM inter-node RPC port
* the Erlang EPMD port
because Plausible does not use them (see added comment).
This is done by setting `RELEASE_DISTRIBUTION=none`.
Thus, this commit also removes the NixOS setting `releaseCookiePath`,
because it now has no effect.
Closes#216989
First of all, a bit of context: in PostgreSQL, newly created users don't
have the CREATE privilege on the public schema of a database even with
`ALL PRIVILEGES` granted via `ensurePermissions` which is how most of
the DB users are currently set up "declaratively"[1]. This means e.g. a
freshly deployed Nextcloud service will break early because Nextcloud
itself cannot CREATE any tables in the public schema anymore.
The other issue here is that `ensurePermissions` is a mere hack. It's
effectively a mixture of SQL code (e.g. `DATABASE foo` is relying on how
a value is substituted in a query. You'd have to parse a subset of SQL
to actually know which object are permissions granted to for a user).
After analyzing the existing modules I realized that in every case with
a single exception[2] the UNIX system user is equal to the db user is
equal to the db name and I don't see a compelling reason why people
would change that in 99% of the cases. In fact, some modules would even
break if you'd change that because the declarations of the system user &
the db user are mixed up[3].
So I decided to go with something new which restricts the ways to use
`ensure*` options rather than expanding those[4]. Effectively this means
that
* The DB user _must_ be equal to the DB name.
* Permissions are granted via `ensureDBOwnerhip` for an attribute-set in
`ensureUsers`. That way, the user is actually the owner and can
perform `CREATE`.
* For such a postgres user, a database must be declared in
`ensureDatabases`.
For anything else, a custom state management should be implemented. This
can either be `initialScript`, doing it manual, outside of the module or
by implementing proper state management for postgresql[5], but the
current state of `ensure*` isn't even declarative, but a convergent tool
which is what Nix actually claims to _not_ do.
Regarding existing setups: there are effectively two options:
* Leave everything as-is (assuming that system user == db user == db
name): then the DB user will automatically become the DB owner and
everything else stays the same.
* Drop the `createDatabase = true;` declarations: nothing will change
because a removal of `ensure*` statements is ignored, so it doesn't
matter at all whether this option is kept after the first deploy (and
later on you'd usually restore from backups anyways).
The DB user isn't the owner of the DB then, but for an existing setup
this is irrelevant because CREATE on the public schema isn't revoked
from existing users (only not granted for new users).
[1] not really declarative though because removals of these statements
are simply ignored for instance: https://github.com/NixOS/nixpkgs/issues/206467
[2] `services.invidious`: I removed the `ensure*` part temporarily
because it IMHO falls into the category "manage the state on your
own" (see the commit message). See also
https://github.com/NixOS/nixpkgs/pull/265857
[3] e.g. roundcube had `"DATABASE ${cfg.database.username}" = "ALL PRIVILEGES";`
[4] As opposed to other changes that are considered a potential fix, but
also add more things like collation for DBs or passwords that are
_never_ touched again when changing those.
[5] As suggested in e.g. https://github.com/NixOS/nixpkgs/issues/206467
It's time again, I guess :>
Main motivation is to stop being pinged about software that I maintained
for work now that I'm about to switch jobs. There's no point in pinging
me to review/test updates or to debug issues in e.g. the Atlassian stack
or on mailman since I use neither personally.
But there's also a bunch of other stuff that I stopped using personally. While
at it I realized that I'm still maintainer of a few tests & modules related to
packages I stopped maintaining in the past already.
- Remove lots of declared options that were not used outside of being
included in settings. These should now be used through the freeform
module.
- Deprecate `cfg.workDir`, in favor of using systemds `StateDirectory`
- Use sqlite as default database.
Co-authored-by: Sandro Jäckel <sandro.jaeckel@gmail.com>
With those settings starting dex crashed with:
Oct 03 21:37:51 hydrogen (tart-pre)[11048]: dex.service: Failed to set up mount namespacing: /run/systemd/mount-rootfs/sys/fs/cgroup/system.slice/dex.service/memory.pressure: No such file or directory
Oct 03 21:37:51 hydrogen (tart-pre)[11048]: dex.service: Failed at step NAMESPACE spawning /nix/store/q8clp1lm8jznxf9330jd8cwc6mdy6glz-dex-start-pre: No such file or directory
First of all, a few cleanups were made to make it more readable:
* Reordered the sections by their priority so what you're reading in Nix
is also what you get in the final nginx.conf.
* Unified media/asset locations
Most notably, this fixes the
Your web server is not properly set up to resolve "/ocm-provider/".
warning since 27.1.2 where `ocm-provider` was moved from a static
directory in the source tarball to a dynamic HTTP route[1].
Additionally, the following things were fixed:
* The 404 checks for build/tests/etc. are now guaranteed to be before
the `.php` location match and it's not implicitly relied upon Nix's
internal attribute sorting anymore.
* `.wasm` files are supported properly and a correct `Content-Type` is
set.
* For "legacy" routes (e.g. `ocs-provider`/`cron`/etc) a `rewrite` rule
inside the location for fastcgi is used as recommended by upstream[2].
This also makes it easier to understand the purpose of the location
itself (i.e. use fastcgi for PHP code).
[1] https://github.com/nextcloud/documentation/pull/11179
[2] https://docs.nextcloud.com/server/27/admin_manual/installation/nginx.html
This commit fixes the service failing to start for the first time since
the update-schema operation requires human interaction (typing 'yes') in
order to actually perform the schema upgrade.
the schema files referenced in the current preStart are empty.
other ones exist, but don't apply cleanly either.
calling update.php with --update-schema works for initial setup and
updates. if the database schema is already up to date, it's idempotent.
This change enables _FILE variants for all secrets in Healthchecks
configuration so they can be read from a file and not stored in
/nix/store.
In particular, it adds support for these secrets:
DB_PASSWORD, DISCORD_CLIENT_SECRET, EMAIL_HOST_PASSWORD,
LINENOTIFY_CLIENT_SECRET, MATRIX_ACCESS_TOKEN, PD_APP_ID,
PUSHBULLET_CLIENT_SECRET, PUSHOVER_API_TOKEN, S3_SECRET_KEY, SECRET_KEY,
SLACK_CLIENT_SECRET, TELEGRAM_TOKEN, TRELLO_APP_KEY, and TWILIO_AUTH.
Previously, if someone changed DB to postgres or mysql and forgot to
change DB_NAME, services.healthchecks would have used the hardcoded path
that was meant for the sqlite as DB_NAME.
This change introduces DB and DB_NAME options in
services.healthchecks.settings.
exiftool is written in Perl which appears to call `chown` as part of startup. This is blocked by the `@privileged` system call group. This causes a failure when changing image orientation.
Fixes: https://github.com/NixOS/nixpkgs/issues/249120
This change also generates the invidious config by putting JSON
snippets into a bash array and then using jq to merge them all into
a single configuration where later elements override previous
elements.
This option only has an effect on the initial setup of Nextcloud and
changes later won't have any effect.
Same issue as with `adminpassFile` - it's only passed to the installer
command - but even worse because the username is frequently used as
unique ID in the database, so there's no trivial way to change it, even
imperatively.
Right now, the settings aren't additive which means that when I do
services.nextcloud.phpOptions."opcache.interned_strings_buffer = "23";
all other options are discarded because of how the module system works.
This isn't very nice in this case, though because wanting to override
a single option doesn't mean I want to discard the rest of the -
reasonable - defaults. Hence, the settings are showed as default in the
option's manual section, but are added with normal priority.
That means, to override _all_ options at once, an expression like
services.nextcloud.phpOptions = mkForce {
/* ... */
};
is needed. This is also way more intuitive IMHO because the `mkForce`
explicitly tells that everything will be modified.
Also, APCu enable and the memory & file-size limits are also written
into `services.nextcloud.phpOptions` rather than adding them
silently before passing all options to the PHP package. This has the
benefit that users will realize on evaluation time that they configured
options that would otherwise be set by the module on its own.
Now migrations are run only on upgrade / downgrade and first start,
which makes netbox much faster on a normal start.
add the reindex for NetBox > 3.5.0, to populate the index, preventing
empty search results.
Migrations were moved out of netbox-migration.service into
netbox.service, to prevent service dependency issues when upgrading
NixOS.
This patch adds an `authType` option to enable configuring FreshRSS's
`auth_type` parameter.
Upstream documentation for this feature is located here:
https://freshrss.github.io/FreshRSS/en/admins/09_AccessControl.html
An accompanying NixOS test is provided to confirm this feature works
as expected.
Upstream supports php 8.0/8.1 for the 3.3.0 release. The upgrade to 8.2
caused a type mismatch in carbon.
> PHP message: Exception: Code: 0, Message: Carbon\Carbon::setLastErrors(): Argument #1 ($lastErrors) must be of type array, bool given, called in /nix/store/2prnw9qya9kaks2rwvd6fkrz0c7l5ygd-engelsystem-3.3.0/share/engelsystem/vendor/nesbot/carbon/src/Carbon/Traits/Creator.php on line 98, File: vendor/nesbot/carbon/src/Carbon/Traits/Creator.php:928
As 3bb3859 bumped the default PHP version to 8.2, the snipe-it package
has been pinned to PHP 8.1. This commit changes the php package used in
the module to the one pinned by snipe-it.
LoadCredential was misused as it is not building any environment variable,
it is the responsibility of our preStart to do it so
Plausible's script can pick it up.
It's supposed to be `memcache.distributed`, not an associative PHP array
named `memcache` with a key `distributed`.
This was probably never caught because the initial `grep -q` check in
the test was invalid: `redis-cli` prints nothing if no keys can be found
when not writing to a tty apparently.
Lemmy checks the environment variable before the configuration file;
i.e. if the file is used to configure the database but the environment
variable is set to anything, the connection will fail because it'll
ignore the file. This was the previous behavior.
Now, the environment variable will be unset unless the user explicitly
chooses to set it, which makes the file-based configuration function
correctly. It's also possible to manually set the environment variable,
which has the major advantage of working around [this issue][0], which
prevents certain setups from working.
[0]: https://github.com/LemmyNet/lemmy/issues/2945
Part of #229910.
Unfortunately this is a little hacky because upstream doesn't intend to
support it for 2.5, but only for 3.0 which isn't out yet, however nodejs-16
will get out of maintenance during the support-span of NixOS 23.05[1].
The only breaking change is that `extract-files` uses a deprecated way
of exposing modules, I went through the list of other breaking
changes in v17 and v18[2][3] and couldn't spot any usage of removed
features, also local testing didn't reveal further issues.
Unfortunately fixing that breakage turned out to be non-trivial.
Currently, `extract-files@9.0.0` is used with the problematic portions
in its `package.json`, however it's only a transitive dependency of
`@graphql-tools/url-loader` & `apollo-upload-client`. Unfortunately, the
versions of that in use require v9 and don't work with a newer version of
`extract-files` with the problem fixed[4]. Also, upgrading the
dependencies in question is not a feasible option because `graphql-tools`
was split up into multiple smaller packages in v8 and also some of the
APIs in use in `wiki.js` were dropped there[5], so this would also be
very time-consuming and non-trivial to fix.
Since this was the only issue, I decided to go down the hacky route and
patch the problem in `package.json` of `extract-files` manually during
our `patchPhase`.
[1] https://github.com/requarks/wiki/discussions/6388
[2] https://nodejs.org/en/blog/release/v17.0.0
[3] https://nodejs.org/en/blog/release/v18.0.0
[4] Upon local testing, this broke with the following error:
Error [ERR_PACKAGE_PATH_NOT_EXPORTED]: Package subpath './public/extractFiles' is not defined by "exports" in /wiki/node_modules/extract-files/package.json
[5] For instance `SchemaDirectiveVisitor` in
`server/graph/directives/auth`.
