it should be checking that it is not a broken symlink but bash
conditionals are difficult
-d was causing the directory to not be created if it does not exist
```
$ install -m 0755 -d $PWD/hello
$ ls
hello/
$ ln -s something notexist
'notexist' -> 'something'
$ ls -l
lrwxrwxrwx artturin artturin 9 B Sat Sep 9 06:59:44 2023 notexist@ ⇒ something
drwxr-xr-x artturin artturin 2 B Sat Sep 9 06:59:36 2023 hello/
$ install -m 0755 -d $PWD/notexist
install: cannot change permissions of ‘/home/artturin/nixgits/my-nixpkgs/test/notexist’: No such file or directory
```
RequiredForOnline takes a boolean or a minimum operational state and an
optional maximum operational state. In the latter case, range values are
separated with colon.
Underneath, systemd-networkd’s reload is just `networkctl reload`. Per
`man networkctl`, calling `reload` is expected to fully handle new,
modified, and removed .network files, but it only handles *new* .netdev
files. For simplicity, assume .network -> reload and .netdev -> restart.
It’s desirable to perform reload instead of restart, as restart has the
potential to bring down interfaces, resulting in a loss of network
connectivity.
Just like with system-wide tmpfiles, call `systemd-tmpfiles --create
--remove` for users during activation. This fixes an issue where new
entries in a user's tmpfiles are not reflected after activation, only at
boot when the user service systemd-tmpfiles-setup.service runs or only
after running systemd-tmpfiles manually.
Before this commit there was no way to access (boot into) specialisation of previous generations from grub,even tho they are there.
This commit will add grub submenu for each generation if the generation has any specialisation.
Which will allow you to boot into them.
Co-authored-by: Samuel Dionne-Riel <samuel@dionne-riel.com>
When I boot there's a warning `stage-2-init: install: cannot change permissions of '/etc/nixos': No such file or directory`
because my /etc/nixos is a symlink to $HOME/dotfiles.
```
/etc/nixos -> /home/artturin/dotfiles
```
These lines were added in 56b4653904
This avoids creating a build-time reference on `boot.kernelParams` if
the configuration does not use a kernel, i.e., `boot.kernel.enable` is
set to `false`.
There is only other `with` with a somewhat broad scope, `with pkgs`, but
it's used in a place where it would become awkward to change out. And
anyway its scope is rather limited still.
With a limited testing of all packaged GRUB 2 themes (pkgs.nixos-grub2-theme)
this is tested to work.
Without this change, the theme loading will error out (waiting for a key press).
With this change, the theme loads and works as expected.
The intent was to not pass the flag when installing as removable. In
reality there is a third case, where you may not want to touch EFI
variables, and not want to install as removable.
In that case, it would install to the generic \EFI\grub\grubx64.efi,
which is not a good choice in any cases. The operating system should
"own" their path under \EFI\ to be a good citizen [citation needed].
With this change, there can be only two paths GRUB can be installed to:
- \EFI\NixOS-boot\grubx64.efi
- \EFI\BOOT\bootx64.efi
This removes the surprising behaviour where GRUB may be installed to a
different location only because we configured NixOS not to touch EFI
variables.
It may be necessary under some configurations to install GRUB without
touching EFI variables, but to the NixOS-owned location.
This commit updates the binfmt magic-patterns using
f5e6786de4/scripts/qemu-binfmt-conf.sh
The patterns prior to this commit did not understand the difference
between mips32-*-* (32-bit void*,int) and mips64-*-*abin32 (32-bit
void*, 64-bit int). This commit corrects that.
In some setups, and especially with sytemd-networkd becoming more widely
used, networking.useDHCP is set to false. Despite this, it may be useful
to have dhcp in the initramfs.
Build logs show:
> configure: WARNING: non-linux system; not building mount
> configure: WARNING: non-linux system; not building swapon
So skip these on non-Linux
Using getOutput prevents eval failures on other platforms.
Things should stay eval'able with NIXPKGS_ALLOW_UNSUPPORTED_SYSTEM=1
Co-authored-by: Artturin <Artturin@artturin.com>
got broken in 6ea1a2a1be which changed
runCommandCC to runCommand but was not
noticed because it was failing silently
runCommand doesn't include CC or bintools
Example 10. of man page of systemd.network(5) shows:
```
Example 10. MacVTap
This brings up a network interface "macvtap-test" and attaches it to "enp0s25".
# /usr/lib/systemd/network/25-macvtap.network
[Match]
Name=enp0s25
[Network]
MACVTAP=macvtap-test
```
Which is a MACVTAP example and is currently unsupported in NixOS.
This is useful for people using "modern" technologies with virtual machines.
The whole option set was recommended against since mid-2019, and never
worked with the Raspberry Pi 4 family of devices.
We should have deprecated it in early 2020 for removal by 2021. At the
time I did not feel confident in making such a decision, and never
ended-up getting around to it.
The ***only*** supported-by-NixOS boot methods for AArch64 are
standards-based boot methods, namely UEFI or the pragmatically
almost-standard extlinux-compatible for U-Boot.
You can quote me on that.
According to networkd netdev's manpage:
```
Independent=
Takes a boolean. When true, the vxlan interface is created without any underlying network interface. Defaults to false, which means that a .network
file that requests this VXLAN interface using VXLAN= is required for the VXLAN to be created.
```
is a valid option for [VXLAN] section.
According to systemd.netdev manpage:
```
MACAddress=
Specifies the MAC address to use for the device, or takes the special value "none". When "none", systemd-networkd does not request the MAC address for
the device, and the kernel will assign a random MAC address. For "tun", "tap", or "l2tp" devices, the MACAddress= setting in the [NetDev] section is
not supported and will be ignored. Please specify it in the [Link] section of the corresponding systemd.network(5) file. If this option is not set,
"vlan" device inherits the MAC address of the master interface. For other kind of netdevs, if this option is not set, then the MAC address is
generated based on the interface name and the machine-id(5).
Note, even if "none" is specified, systemd-udevd will assign the persistent MAC address for the device, as 99-default.link has
MACAddressPolicy=persistent. So, it is also necessary to create a custom .link file for the device, if the MAC address assignment is not desired.
```
Therefore, `none` is an acceptable value.
Without this change, GRUB installation on non-PC systems (such as
aarch64-linux) only works if boot.loader.grub.devices is set to exactly
`["nodev"]`. If boot.loader.grub.devices was any other value (including
the default `[]`), users got the error:
Died at /nix/store/an9ngv2vg95bdcy0ifsxlbkasprm4dcw-install-grub.pl line 586.
install-grub.pl verifies that if both $grub and $grubEfi are set, then
$grubTarget (e.g. i386-pc) and $grubTargetEfi (e.g. x86_64-efi) must
both be set, or the script will `die`. On non-PC systems, $grubTarget
is "".
When boot.loader.grub.devices is ["nodev"], $grub is set to null,
disabling non-EFI installation. But if a user has devices set for an
x86_64 config, or is using only mirroredBoots without setting devices,
they will hit this `die`.
This change sets $grub to "" if $grubTarget is "".
This essentially backports
https://github.com/systemd/systemd/pull/27791. `systemd-networkd.service`
is sent the `SIGTERM` signal, but it is not required to be stopped
before `initrd-switch-root.target` is reached, despite the use of
`systemctl isolate initrd-switch-root.target`. This is because when
there is no ordering at all between two units, and a transaction stops
one and starts the other, the two operations can happen
simultaneously. This means the service could still be running when
`switch-root` actually occurs. Then, stage 2 systemd will see the
service still running and decide it doesn't need to add a start
operation for it to its initial transaction. Finally, the service
exits, but only after it's already too late. If, however, there is any
ordering at all between a stopping unit and a starting unit, then the
stop operation will be done first. This way, we ensure that the
service is properly exited before doing `switch-root`.
This is something to keep in mind going forward. There may be other
services that need this treatment. These `before` and `conflicts`
definitions are the correct way to ensure a unit is actually stopped
before you reach initrd-switch-root
it is now possible to supply a stratis pool uuid
for every filesystem, and if that filesystem
is required for boot, the relevant pool will be
started in the initramfs.
Enable using an erofs filesystem as one of the filesystems needed to
boot the system. This is useful for example in image based deployments
where the Nix store is mounted read only.
[erofs](https://docs.kernel.org/filesystems/erofs.html) offers multiple
benefits over older filesystems like squashfs. Skip fsck.erofs because
it is still experimental.
Store the definition files in the initrd instead of reading them from
the Nix store in /sysroot.
This way, the initrd has to be re-generated every time the definition
files change. When the path to the defintion files instead of the
definition files themselves are embedded in the initrd, however, the
initrd also has to be re-generated every time. In this regard, this
change does not improve the status quo.
However, now systemd-repart also works reliable when the Nix store is
mounted separately from the root partition.
This change also enables new use-cases like creating partitions
necessary to boot the system. However, by default, the root partition
cannot be created on first boot because the systemd-repart service
requires a /sysroot to be mounted. Otherwise, systemd-repart cannot
determine the device to operate on.
Since v253, systemd-repart tries to create temporary directories in
/var/tmp. However, this directory doesn't exist in the initrd. This
commit adds an enviroment variable to re-use the existing /tmp directory
instead of /var/tmp.
The `B` in bridge should be capitalized.
It currently leads to an evuluation error:
```
error: attribute 'sectionbridgeVLAN' missing
at /nix/store/7wmrwj0sgwg1iivxk43lpkqjhji57mq7-source/nixos/modules/system/boot/networkd.nix:2386:56:
2385| example = { VLAN = "10-20"; };
2386| type = types.addCheck (types.attrsOf unitOption) check.network.sectionbridgeVLAN;
| ^
2387| description = lib.mdDoc ''
Did you mean sectionBridgeVLAN?
```
This query yielded no results on search.nixos.org.
I don't think I can make all options magically appear, but you can
the other options by reading the text.
In order to fix
https://github.com/NixOS/nixpkgs/issues/114552 (profile name with
special characters), all OSError have been ignored while only the OSError
with errno 22 (invalid argument) could has been ignored.
The drawback of ignoring all OSError is that the "No space left on
device" error is also ignored. When the /boot doesn't have enough
available disk space, the switch-to-configuration script succeeds
while the boot menu has not been updated: the user thinks it's system
has been updated, but on the next reboot it is actually rollbacked.
