We take the idris2 projects version of the derivation. Originally,
Idris2 did not maintain their own nix derivation, so we created our
own. Now they maintain their own derivation, so we should try to
keep ours as close to theirs.
This change comes with the following differences:
* support files are in its own output, instead of packaged with idris2
- This makes it necessary to provide --package for contrib and network
!!! This is a breaking change !!!
* IDIRS2_PREFIX is set to ~/.idris2 instead of pointing to nix-store
- This makes --install work as expected for the user
* Properly set IDRIS2_PACKAGE_PATH
* non-linux platform uses chez-racket instead of chez
This renames our `firmwareLinuxNonfree` package to `linux-firmware`.
There is prior art for this in multiple other distros[1][2][3].
Besides making the package more discoverable by those searching for the
usual name, this also brings it in-line with the `kebab-case` we
normally see in `nixpkgs` pnames, and removes the `Nonfree` information
from the name, which I consider redundant given it's present in
`meta.license`.
The corresponding alias has been added, so this shouldn't break
anything.
[1]: https://archlinux.org/packages/core/any/linux-firmware/
[2]: https://src.fedoraproject.org/rpms/linux-firmware
[3]: https://packages.gentoo.org/packages/sys-kernel/linux-firmware
This is a useful utility for monitoring network performance over time
using a combination of MTR and Prometheus. Also adding a service definition.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Previously we allocated subuids automatically for all normal users.
Make this explicitly configurable, so that one can use this for system
users too (or explicitly disable for normal users). Also don't allocate
automatically by default if a user already has ranges specified statically.
Other services such as minecraft-server and plex allow configuration of
the dataDir option, allowing the files stored by each service to be in a
custom location.
Co-authored-by: Aaron Andersen <aaron@fosslib.net>
Previously, this was only implicitly enabled if xserver.enable = true.
However, Wayland-based desktops do not require this, and so configuring
SSH_ASKPASS on a Wayland desktop becomes cumbersome. This simplifies
that by adding a new option that defaults to the old conditional.
- Add the migrations directory to the package
- Add postgres support to the package
- Add a service for powerdns-admin
Co-authored-by: Zhaofeng Li <hello@zhaofeng.li>
* elk7: 7.11.1 -> 7.16.1
* nixosTests.elk: Improve reliability and compatibility with ELK 7.x
- Use comparisons in jq instead of grepping
- Match for `.hits.total.value` if version >= 7, otherwise it always
passes
- Make curl fail if requests fails
* nixos/filebeat: Add initial module and test
Filebeat is an open source file harvester, mostly used to fetch logs
files and feed them into logstash.
This module can be used instead of journalbeat if used with
`filebeat7` and configured with the `journald` input.
* python3Packages.parsedmarc.tests: Fix breakage
- Don't use the deprecated elasticsearch7-oss package
- Improve jq query robustness and add tracing
* rl-2205: Note the addition of the filebeat service
* elk6: 6.8.3 -> 6.8.21
The latest version includes a fix for CVE-2021-44228.
* nixos/journalbeat: Add a loose dependency on elasticsearch
Avoid unnecssary back-off when elasticsearch is running on the same
host.
The GTK+ 2 version of Claws Mail, major version number three, relies on
Python 2, which is end-of-life and might be dropped in the nixpkgs.
In favour of #148779, this older branch of Claws Mail was removed.
This reverts commit 57961d2b83, reversing
changes made to b04f913afc.
(I.e. this reverts PR #141192.)
While well-intended, this change does unfortunately introduce very
serious regressions that are especially disruptive/noticeable on desktop
systems (e.g. users of Sway will loose their graphical session when
running "nixos-rebuild switch").
Therefore, this change has to be reverted ASAP instead of trying to fix
it in "production".
Note: An updated version should be extensively discussed, reviewed, and
tested before re-landing this change as an earlier version also had to
be reverted for the exact same issues [0].
Fix: #146727
[0]: https://github.com/NixOS/nixpkgs/pull/73871#issuecomment-559783752
See the added comment in all-packages.nix for a more detailed
explanation. This makes the top-level GHC different from
haskellPackages.ghc (which is build->host and used for building the
package set), but more consistent with gcc, gnat etc.
Specifically, pkgsCross.${platform}.buildPackages.ghc will now be a
cross-compiler instead of a native build->build compiler.
Since this change has a slight chance of being disruptive, add a note to
the changelog.
Update the default GNAT version from 9 to 11, as GNAT >= 11 is required
to compile the 22.* AdaCore libraries.
To allow this, we need to pick a patch from ghdl's master fixing a
compilation problem with GNAT 11.
The option `services.prometheus.environmentFile` has been removed since it was causing [issues](https://github.com/NixOS/nixpkgs/issues/126083) and Prometheus now has native support for secret files.
pam_mkhomedir should create homedirs with the same umask as the rest
of the system. Currently it creates homedirs with go+rx which makes
it readable for other non-privileged users.
Use service internal bind mounts instead of global ones.
This also moves the logs to /var/log/unifi on the host
and the run directory to /run/unifi.
Closes#61424
The new option `services.prometheus.enableReload` has been introduced
which, when enabled, causes the prometheus systemd service to reload
when its config file changes.
More specifically the following property holds: switching to a
configuration (`switch-to-configuration`) that changes the prometheus
configuration only finishes successully when prometheus has finished
loading the new configuration.
`enableReload` is `false` by default in which case the old semantics
of restarting the prometheus systemd service are in effect.
* FluidSynth 1.1.11 was kept around as a dependency of some packages
that hadn't yet adjusted to API breakages. All of these packages now
use FluidSynth 2.x, so fluidsynth_1 can be removed. It has been broken
ever since glib was updated to 2.70 and was affected by an unpatched
CVE.
* Refactor expression a bit, use pname instead of name.
* Add changelog entry in case someone was using this downstream
(accidentally?).
Fixes#141508.
Fixes#124624.
The version 20 of Nextcloud will be EOLed by the end of this month[1].
Since the recommended default (that didn't raise an eval-warning) on
21.05 was Nextcloud 21, this shouldn't affect too many people.
In order to ensure that nobody does a (not working) upgrade across
several major-versions of Nextcloud, I replaced the derivation of
`nextcloud20` with a `throw` that provides instructions how to proceed.
The only case that I consider "risky" is a setup upgraded from 21.05 (or
older) with a `system.stateVersion` <21.11 and with
`services.nextcloud.package` not explicitly declared in its config. To
avoid that, I also left the `else-if` for `stateVersion < 21.03` which
now sets `services.nextcloud.package` to `pkgs.nextcloud20` and thus
leads to an eval-error. This condition can be removed
as soon as 21.05 is EOL because then it's safe to assume that only
21.11. is used as stable release where no Nextcloud <=20 exists that can
lead to such an issue.
It can't be removed earlier because then every `system.stateVersion <
21.11` would lead to `nextcloud21` which is a problem if `nextcloud19`
is still used.
[1] https://docs.nextcloud.com/server/20/admin_manual/release_schedule.html
mosquitto needs a lot of attention concerning its config because it doesn't
parse it very well, often ignoring trailing parts of lines, duplicated config
keys, or just looking back way further in the file to associated config keys
with previously defined items than might be expected.
this replaces the mosquitto module completely. we now have a hierarchical config
that flattens out to the mosquitto format (hopefully) without introducing spooky
action at a distance.
This commit changes a lot more that you'd expect but it also adds a lot
of new testing code so nothing breaks in the future. The main change is
that sockets are now restarted when they change. The main reason for
the large amount of changes is the ability of activation scripts to
restart/reload units. This also works for socket-activated units now,
and honors reloadIfChanged and restartIfChanged. The two changes don't
really work without each other so they are done in the one large commit.
The test should show what works now and ensure it will continue to do so
in the future.
allows configuration of foo-over-udp decapsulation endpoints. sadly networkd
seems to lack the features necessary to support local and peer address
configuration, so those are only supported when using scripted configuration.
The multipath-tools package had existed in Nixpkgs for some time but
without a nixos module to configure/drive it. This module provides
attributes to drive the majority of multipath configuration options
and is being successfully used in stage-1 and stage-2 boot to mount
/nix from a multipath-serviced iSCSI volume.
Credit goes to @grahamc for early contributions to the module and
authoring the NixOS module test.
NixOS should be able to support the Nintendo Switch Pro controller for
steam and non-steam at the same time. Currently there are two mutually
exclusive ways to support the Pro Controller: Steam and `hid-nintendo`.
Unfortunately these don't work together, but there's a workaround in
newer versions of `joycond` (described [here](https://wiki.archlinux.org/title/Gamepad#Using_hid-nintendo_pro_controller_with_Steam_Games_(with_joycond))). To use this
workaround `hid-nintendo` and `joycond` need to be updated, and the
systemd and udev configuration needs to be made available in NixOS.
In opencv 2.x, unfree libraries are built by default. The package
should therefore have been marked as unfree, but wasn't.
I've disabled the non-free libraries by default, and added an option
to enable them. There are three programs in Nixpkgs that depend on
opencv2: mathematica, pfstools, and p2pvc. pfstools requires the
non-free libraries if it's built with opencv support, so I've disabled
opencv by default there and added an option to enable it. p2pvc links
fine, so presumably doesn't need the non-free libraries. I can't test
mathematica, so I'm just going to leave it alone.
This updates systemd to version v249.4 from version v247.6.
Besides the many new features that can be found in the upstream
repository they also introduced a bunch of cleanup which ended up
requiring a few more patches on our side.
a) 0022-core-Handle-lookup-paths-being-symlinks.patch:
The way symlinked units were handled was changed in such that the last
name of a unit file within one of the unit directories
(/run/systemd/system, /etc/systemd/system, ...) is used as the name
for the unit. Unfortunately that code didn't take into account that
the unit directories themselves could already be symlinks and thus
caused all our units to be recognized slightly different.
There is an upstream PR for this new patch:
https://github.com/systemd/systemd/pull/20479
b) The way the APIVFS is setup has been changed in such a way that we
now always have /run. This required a few changes to the
confinement tests which did assert that they didn't exist. Instead of
adding another patch we can just adopt the upstream behavior. An
empty /run doesn't seem harmful.
As part of this work I refactored the confinement test just a little
bit to allow better debugging of test failures. Previously it would
just fail at some point and it wasn't obvious which of the many
commands failed or what the unexpected string was. This should now be
more obvious.
c) Again related to the confinement tests the way a file was tested for
being accessible was optimized. Previously systemd would in some
situations open a file twice during that check. This was reduced to
one operation but required the procfs to be mounted in a units
namespace.
An upstream bug was filed and fixed. We are now carrying the
essential patch to fix that issue until it is backported to a new
release (likely only version 250). The good part about this story is
that upstream systemd now has a test case that looks very similar to
one of our confinement tests. Hopefully that will lead to less
friction in the long run.
https://github.com/systemd/systemd/issues/20514https://github.com/systemd/systemd/pull/20515
d) Previously we could grep for dlopen( somewhat reliably but now
upstream started using a wrapper around dlopen that is most of the
time used with linebreaks. This makes using grep not ergonomic
anymore.
With this bump we are grepping for anything that looks like a
dynamic library name (in contrast to a dlopen(3) call) and replace
those instead. That seems more robust. Time will tell if this holds.
I tried using coccinelle to patch all those call sites using its
tooling but unfornately it does stumble upon the _cleanup_
annotations that are very common in the systemd code.
e) We now have some machinery for libbpf support in our systemd build.
That being said it doesn't actually work as generating some skeletons
doesn't work just yet. It fails with the below error message and is
disabled by default (in both minimal and the regular build).
> FAILED: src/core/bpf/socket_bind/socket-bind.skel.h
> /build/source/tools/build-bpf-skel.py --clang_exec /nix/store/x1bi2mkapk1m0zq2g02nr018qyjkdn7a-clang-wrapper-12.0.1/bin/clang --llvm_strip_exec /nix/store/zm0kqan9qc77x219yihmmisi9g3sg8ns-llvm-12.0.1/bin/llvm-strip --bpftool_exec /nix/store/l6dg8jlbh8qnqa58mshh3d8r6999dk0p-bpftools-5.13.11/bin/bpftool --arch x86_64 ../src/core/bpf/socket_bind/socket-bind.bpf.c src/core/bpf/socket_bind/socket-bind.skel.h
> libbpf: elf: socket_bind_bpf is not a valid eBPF object file
> Error: failed to open BPF object file: BPF object format invalid
> Traceback (most recent call last):
> File "/build/source/tools/build-bpf-skel.py", line 128, in <module>
> bpf_build(args)
> File "/build/source/tools/build-bpf-skel.py", line 92, in bpf_build
> gen_bpf_skeleton(bpftool_exec=args.bpftool_exec,
> File "/build/source/tools/build-bpf-skel.py", line 63, in gen_bpf_skeleton
> skel = subprocess.check_output(bpftool_args, universal_newlines=True)
> File "/nix/store/81lwy2hfqj4c1943b1x8a0qsivjhdhw9-python3-3.9.6/lib/python3.9/subprocess.py", line 424, in check_output
> return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
> File "/nix/store/81lwy2hfqj4c1943b1x8a0qsivjhdhw9-python3-3.9.6/lib/python3.9/subprocess.py", line 528, in run
> raise CalledProcessError(retcode, process.args,
> subprocess.CalledProcessError: Command '['/nix/store/l6dg8jlbh8qnqa58mshh3d8r6999dk0p-bpftools-5.13.11/bin/bpftool', 'g', 's', '../src/core/bpf/socket_bind/socket-bind.bpf.o']' returned non-zero exit status 255.
> [102/1457] Compiling C object src/journal/libjournal-core.a.p/journald-server.c.oapture output)put)ut)
> ninja: build stopped: subcommand failed.
f) We do now have support for TPM2 based disk encryption in our
systemd build. The actual bits and pieces to make use of that are
missing but there are various ongoing efforts in that direction.
There is also the story about systemd in our initrd to enable this
being used for root volumes. None of this will yet work out of the
box but we can start improving on that front.
g) FIDO2 support was added systemd and consequently we can now use
that. Just with TPM2 there hasn't been any integration work with
NixOS and instead this just adds that capability to work on that.
Co-Authored-By: Jörg Thalheim <joerg@thalheim.io>
Qt links against GTK to be able to use native GTK file chooser
in GTK-oriented DEs. However, GTK expects a specific environment,
which means the application needs to be wrapped to prevent crashes
when file chooser is opened in some environments.
This patch bypasses the need for wrapping Qt applications with GTK-related
environment since the file chooser dialogue will now come from a separate
process (instantiated by the XDG desktop portal via D-Bus).
In the future, we could remove the GTK dependency from Qt to fix the crashes
on non-{GNOME,Pantheon} environments. Then, users would be able to choose
between non-native Qt dialogue or native one facilitated by XDG portals
(e.g. through setting `QT_QPA_PLATFORMTHEME` to either `qgnomeplatform`,
or `xdgdesktopportal`).
One disadvantage is adding a Qt dependency to GNOME, even for people
who might not use any Qt apps. But they can easily just add `qt5.enable = false;`
to their NixOS configuration.
The configuration is also presumably less battle tested than plain Qt
with its first-party GTK integration. But it is backed by Fedora
and used by Manjaro GNOME so it cannot be that bad.
Lastly, I worry about ABI compatibility of the platform modules
with apps installed from different Nixpkgs revision.
The way `(lib.formats.yaml {}).generate` generates YAML is compliant
because on YAML 1.2 spec JSON is a subset of YAML but it bugs people's
minds and can lead to problems with software that is not compatible with
YAML 1.2.
This commit also changes the test of the generation function. Data
validation/typing remains the same.
See #133802.
Signed-off-by: lucasew <lucas59356@gmail.com>
Recommend to use services.xserver.dpi option instead. Mention in the
documentation that it's a sledgehammer approach and monitor settings should be
used instead.
Also don't set DPI in fontconfig settings; fontconfig should use Xft settings
by default so let's not override one value in multiple places. For example,
user now can set DPI via ~/.Xresources properly.
- boost 167 removed on staging-next (7915d1e03f) × boost attributes are inherited on staging (d20aa4955d)
- linux kernels were moved to linux-kernels.nix on staging-next (c62f911507) × hardened kernels are versioned on staging (a5341beb78) + removed linux_5_12 (e55554491d)
- conflict in node-packages – I regenerated it using node2nix from nixos-unstable (does not build on staging)
The problem behind this is that the hardened patchset[1]. Quite recently
this led to a weird problem when Linux 5.12 was dropped (and thus had to
be removed from `nixpkgs`), there were no patches for 5.13, so
`linuxPackages_hardened_latest` had to be downgraded to 5.10 as base[2]
which may be rather unintuitive and unexpected.
To avoid these kind of "silent downgrades" in the future, it makes sense
to drop the attribute entirely. If somebody wants to use a hardened
kernel, it's better to explicitly pin it using the newly introduced
versioned attributes, e.g. `linuxPackages_4_14_hardened`.
[1] https://github.com/anthraxx/linux-hardened/
[2] https://github.com/NixOS/nixpkgs/pull/133587
The paperless project has moved on to paperless-ng and the original
paperless package in Nixpkgs has stopped working recently (due to
version incompatibility with the providede Django package).
Instead of investing more time into the old module we should migrate all
users to the new module instead.
Some ACME providers (like Buypass) are using a different certificate
to sign OCSP responses than for server certificates. Therefore,
sslTrustedCertificate should be provided by the user and we need to
allow that.
* Previously, both the xorg and wayland backend were built into the yambar
package. The refactor breaks up each backends to its separate, with xorg
being the default. Thus yambar users on wayland should switch to the
yambar-wayland package.
For security reasons, and generally, it is best to create a more fine
grained group than plugdev. This way users that wish to tweak razer
devices don't have access to the entire plugdev group's permissions.
This is of course a breaking change.
- The order of NSS (host) modules has been brought in line with upstream
recommendations:
- The `myhostname` module is placed before the `resolve` (optional) and `dns`
entries, but after `file` (to allow overriding via `/etc/hosts` /
`networking.extraHosts`, and prevent ISPs with catchall-DNS resolvers from
hijacking `.localhost` domains)
- The `mymachines` module, which provides hostname resolution for local
containers (registered with `systemd-machined`) is placed to the front, to
make sure its mappings are preferred over other resolvers.
- If systemd-networkd is enabled, the `resolve` module is placed before
`files` and `myhostname`, as it provides the same logic internally, with
caching.
- The `mdns(_minimal)` module has been updated to the new priorities.
If you use your own NSS host modules, make sure to update your priorities
according to these rules:
- NSS modules which should be queried before `resolved` DNS resolution should
use mkBefore.
- NSS modules which should be queried after `resolved`, `files` and
`myhostname`, but before `dns` should use the default priority
- NSS modules which should come after `dns` should use mkAfter.
With Claws Mail's latest double release of 3.18.0 and 4.0.0, the package
will refer to the more "modern" GTK+ 3 release, major version four. The
GTK+ 2 release, major version 3, is now available in the
`claws-mail-gtk2` package.
In other words, this commit bumps the GTK+ 2 version from 3.17.8 to
3.18.0, the previously unstable GTK+ 3 version 3.99.0 to 4.0.0 and
changes the default to GTK+ 3.
New release, the main feature is updating to GTK4 and significant updates to the internal processing pipelines.
Many dependencies no longer seem to be required, I have manually checked that mentioned plugins are still available.
Logically re-apply 64c70a8c4c ("doc: point out that nixos-21.05 has gnuradio
3.9"), because it was lost in the conversion from docbook to markdown, in
commit 32c2dd304d ("docs: nixos release notes to CommonMark (2105)").
(Apparently we have both .md and .xml release notes now, and CI fails
unless they have the same content (after .md processing), so update the
.xml file to match...)
Logically re-apply 7afaacf9a8 ("doc: fix link to kodi-19.0 announcement"),
because it was lost in the conversion from docbook to markdown, in commit
32c2dd304d ("docs: nixos release notes to CommonMark (2105)").
(Hm, apparently we have *both* docbook and markdown? CI failed before I
updated the .xml file.)
I tried to make this as non-breaking as possible, but it will still
break things slightly for people expecting certain file names in the
packages themselves.
Add the udev-rules file from flashrom source to the out directory. The
file contains rules for programmers used by flashrom. Members of the
`flashrom` system group are allowed to access these devices.
Also, add a module for installing flashrom and adding flashrom to udev
packages. The module can be used by setting `programs.flashrom.enable`
to `true`.
Signed-off-by: Felix Singer <felixsinger@posteo.net>
The previous justification for using "VERBOSE" is incorrect,
because OpenSSH does use level INFO to log "which key was used
to log in" for sccessful logins, see:
6247812c76/auth.c (L323-L328)
Also update description to the wording of the sshd_config man page.
`fail2ban` needs, sshd to be "VERBOSE" to work well, thus
the `fail2ban` module sets it to "VERBOSE" if enabled.
The docs are updated accordingly.
PHP 7.3 won't be supported by upstream for the entire life cycle of
the 21.11 release.
Also drop the pcre' alias since it isn't needed anymore since we don't
need different pcre versions anymore.
Reusing the same private/public key on renewal has two issues:
- some providers don't accept to sign the same public key
again (Buypass Go SSL)
- keeping the same private key forever partly defeats the purpose of
renewing the certificate often
Therefore, let's remove this option. People wanting to keep the same
key can set extraLegoRenewFlags to `[ --reuse-key ]` to keep the
previous behavior. Alternatively, we could put this as an option whose
default value is true.
Note that it made into 2 entries, one about new options in the first section.
Another in the breaking compatibility section due to the openFirewall option
which changes the behavior.
Co-authored-by: schmittlauch <t.schmittlauch+nixos@orlives.de>
The radicale version is no longer chosen automatically based on
system.stateVersion because that gave the impression that old versions
are still supported.
Follow RFC 42 by having a settings option that is
then converted into an unbound configuration file
instead of having an extraConfig option.
Existing options have been renamed or kept if
possible.
An enableRemoteAccess has been added. It sets remote-control setting to
true in unbound.conf which in turn enables the new wrapping of
unbound-control to access the server locally. Also includes options
'remoteAccessInterfaces' and 'remoteAccessPort' for remote access.
Signed-off-by: Marc 'risson' Schmitt <marc.schmitt@risson.space>
The last bits to prevent babeld from running unprivileged was its
kernel_setup_interface routine, that wants to set per interface
rp_filter. This behaviour has been disabled in a patch that has been
submitted upstream at https://github.com/jech/babeld/pull/68 and reuses
the skip-kernel-setup config option.
→ Overall exposure level for babeld.service: 1.7 OK 🙂
Remove old CUDA toolkits (and corresponding CuDNN versions).
- Not supported by upstream anymore.
- We do not use them in nixpkgs.
- We do not test or actively maintain them.
- Anything but ancient GPUs is supported by newer toolkits.
Fixes#107131.
As the only consequence of isSystemUser is that if the uid is null then
it's allocated below 500, if a user has uid = something below 500 then
we don't require isSystemUser to be set.
Motivation: https://github.com/NixOS/nixpkgs/issues/112647
The 5.10 series is the next longterm version of the linux kernel and
I've been using it on multiple x86_64 machines ever since it came out.
I think it is time to switch over the default now, so we get some
additional testing in time for NixOS 21.05.
- Write a `mkDerivation` and `mkDerivationWith` function for gnuradio,
like qt5.
- qradiolink, gqrx: Use gnuradio's callPackage and mkDerivation.
- Use gnuradio.callPackage to define all gnuradio.pkgs.
- Move all gnuradio packages expressions to pkgs/development/gnuradio-modules/ -
modeled after Python's.
- Add more paths to gnuradio's wrapper - add the extra packages as
python modules, and add their executables with proper env vars
wrapping.
Co-authored-by: Frederik Rietdijk <fridh@fridh.nl>
Change the default SMTP port to `25`, to better match the default
address `localhost`. This gets rid of some error outputs in the test,
where it fails to connect to localhost:465.
Also, don't enable postfix by default unless it's actually useful to
us.
ChangeLog: https://nextcloud.com/changelog/#latest21
* Packaged 21.0.0, test-deployed it to my personal instance and tested
the most basic functionality (`davfs2`-mount, {card,cal}dav sync, file
management).
* Bumped the default version for unstable/21.05 to `nextcloud21`. Since
`nextcloud20` was added after the release of 20.09 (and thus the
default on 20.09 is still `nextcloud19`), it's now needed to upgrade
across two majors.
This is not a problem though since it's possible to upgrade to v20 on
20.09 already and if not, the module will guard the administrator
through the upgrade with eval warnings as it's the case since 20.03.
* Dropped `nextcloud17` attribute and marked `nextcloud18` as EOL.
The NixOS 21.03 release has been delayed to 21.05. See NixOS/rfcs#80.
There are two instances of 21.03 which have been left as is, since they
are in stateVersion comparisons. This will ensure that existing user
configurations which refer to 21.03 will continue to work.
Important changes:
- The 'isync' compatibility wrapper was removed.
- The Master/Slave configuration keywords where deprecated and should be
replaced with Far/Near. All users should update their configuration
file accordingly. It's a trivial change and the old Master/Slave
keywords will still work for now but result in the following message:
Notice: Master/Slave are deprecated; use Far/Near instead.
Co-authored-by: Sandro <sandro.jaeckel@gmail.com>
By default, restic determines the location of the cache based on the XDG
base dir specification, which is `~/.cache/restic` when the environment
variable `$XDG_CACHE_HOME` isn't set.
As restic is executed as root by default, this resulted in the cache being
written to `/root/.cache/restic`, which is not quite right for a system
service and also meant, multiple backup services would use the same cache
directory - potentially causing issues with locking, data corruption,
etc.
The goal was to ensure, restic uses the correct cache location for a
system service - one cache per backup specification, using `/var/cache`
as the base directory for it.
systemd sets the environment variable `$CACHE_DIRECTORY` once
`CacheDirectory=` is defined, but restic doesn't change its behavior
based on the presence of this environment variable.
Instead, the specifier [1] `%C` can be used to point restic explicitly
towards the correct cache location using the `--cache-dir` argument.
Furthermore, the `CacheDirectoryMode=` was set to `0700`, as the default
of `0755` is far too open in this case, as the cache might contain
sensitive data.
[1] https://www.freedesktop.org/software/systemd/man/systemd.unit.html#Specifiers
OSS Emulation is considered incomplete so disabling it by default.
Using user level alsa-oss library (nix-env -iA nixos.alsaOss) over
this kernel module is recommended.
The `platform` field is pointless nesting: it's just stuff that happens
to be defined together, and that should be an implementation detail.
This instead makes `linux-kernel` and `gcc` top level fields in platform
configs. They join `rustc` there [all are optional], which was put there
and not in `platform` in anticipation of a change like this.
`linux-kernel.arch` in particular also becomes `linuxArch`, to match the
other `*Arch`es.
The next step after is this to combine the *specific* machines from
`lib.systems.platforms` with `lib.systems.examples`, keeping just the
"multiplatform" ones for defaulting.
androidenv did not previously write license files, which caused certain
gradle-based Android tools to fail. Restructure androidenv's list of
Android packages into a single repo.json file to prevent duplication
and enable us to extract the EULA texts, which we then hash with
builtins.hashString to produce the license files that Android gradle
tools look for.
Remove includeDocs and lldbVersions, as these have been removed
from the Android package repositories.
Improve documentation and examples.
* Content of `programlisting` shouldn't be indented, otherwise it's
weirdly indented in the output.
* Use `<xref linkend=.../>` in the release notes: then users can
directly go to the option documentation when reading release notes.
* Don't use docbook tags in `mkRemovedOptionModule`: it's only used
during evaluation where docbook isn't rendered.
Since slurm-20.11.0.1 the dbd server requires slurmdbd.conf to be
in mode 600 to protect the database password. This change creates
slurmdbd.conf on-the-fly at service startup and thus avoids that
the database password ends up in the nix store.
It's very surprising that services.tor.client.enable would set
services.privoxy.enable. This violates the principle of least
astonishment, because it's Privoxy that can integrate with Tor, rather
than the other way around.
So this patch moves the Privoxy Tor integration to the Privoxy module,
and it also disables it by default. This change is documented in the
release notes.
Reported-by: V <v@anomalous.eu>
configuration.nix(1) states
users.extraUsers.<name>.createHome
[...] If [...] the home directory already exists but is not
owned by the user, directory owner and group will be changed to
match the user.
i.e. ownership would change only if the user mismatched; the code
however ignores the owner, it is sufficient to enable `createHome`:
if ($u->{createHome}) {
make_path($u->{home}, { mode => 0700 }) if ! -e $u->{home};
chown $u->{uid}, $u->{gid}, $u->{home};
}
Furthermore, permissions are ignored on already existing directories and
therefore may allow others to read private data eventually.
Given that createHome already acts as switch to not only create but
effectively own the home directory, manage permissions in the same
manner to ensure the intended default and cover all primary attributes.
Avoid yet another configuration option to have administrators make a
clear and simple choice between securely managing home directories
and optionally defering management to own code (taking care of custom
location, ownership, mode, extended attributes, etc.).
While here, simplify and thereby fix misleading documentation.
Mailman can now work with MTAs other than Postfix. You'll have to configure
it yourself using the options in `services.mailman.settings.mta`.
This addition is reflected in the release notes for 21.03.
A big jump, but the structure hasn't changed much.
This recipe is still based on a binary release provided by upstream.
(It might be interesting to start doing our own builds at some point,
to split client from server, and/or to create packages for removed
"contribs" such as 'zooInspector'. Upstream intends to further slim
down its release tarballs as most deployments only need specific assets.)
See https://www.redhat.com/sysadmin/fedora-31-control-group-v2 for
details on why this is desirable, and how it impacts containers.
Users that need to keep using the old cgroup hierarchy can re-enable it
by setting `systemd.unifiedCgroupHierarchy` to `false`.
Well-known candidates not supporting that hierarchy, like docker and
hidepid=… will disable it automatically.
Fixes#73800
Note that it made into 2 entries, one about new options in the first section.
Another in the breaking compatibility section due to the openFirewall option
which changes the behavior.
This reverts commit fb6d63f3fd.
I really hope this finally fixes#99236: evaluation on Hydra.
This time I really did check basically the same commit on Hydra:
https://hydra.nixos.org/eval/1618011
Right now I don't have energy to find what exactly is wrong in the
commit, and it doesn't seem important in comparison to nixos-unstable
channel being stuck on a commit over one week old.
Please note that this is only for 21.03 since `nextcloud19` is intended
to be the default for the already feature-frozen 20.09 (the bump itself
is supposed to get backported however).
Conform to RFC 1123 [0], specifically to "2.1 Host Names and Numbers",
which allow starting host name with alphanumerical instead of alphabetical characters.
RFC 1123 updates RFC 952 [1], which is referenced in "man 5 hosts".
[0]: https://tools.ietf.org/html/rfc1123
[1]: https://tools.ietf.org/html/rfc952
Both packages will get EOLed within the lifetime of 20.09. `nextcloud17`
can be removed entirely (the attribute-path is kept however to provide
meaningful errors), however `nextcloud18` must be kept as `insecure` to
make sure that users from `nextcloud17` can properly upgrade to
`nextcloud19` on NixOS 20.09.
This removes the `services.dbus.socketActivated` and
`services.xserver.startDbusSession` options. Instead the user D-Bus
session is always socket activated.
Now allows applying external overlays either in form of
.dts file, literal dts context added to store or precompiled .dtbo.
If overlays are defined, kernel device-trees are compiled with '-@'
so the .dtb files contain symbols which we can reference in our
overlays.
Since `fdtoverlay` doesn't respect `/ compatible` by itself
we query compatible strings of both `dtb` and `dtbo(verlay)`
and apply only if latter is substring of the former.
Also adds support for filtering .dtb files (as there are now nearly 1k
dtbs).
Co-authored-by: georgewhewell <georgerw@gmail.com>
Co-authored-by: Kai Wohlfahrt <kai.wohlfahrt@gmail.com>
Right now the UX for installing NixOS on a headless system is very bad.
To enable sshd without physical steps users have to have either physical
access or need to be very knowledge-able to figure out how to modify the
installation image by hand to put an `sshd.service` symlink in the
right directory in /nix/store. This is in particular a problem on ARM
SBCs (single board computer) but also other hardware where network is
the only meaningful way to access the hardware.
This commit enables sshd by default. This does not give anyone access to
the NixOS installer since by default. There is no user with a non-empty
password or key. It makes it easy however to add ssh keys to the
installation image (usb stick, sd-card on arm boards) by simply mounting
it and adding a keys to `/root/.ssh/authorized_keys`.
Importantly this should not require nix/nixos on the machine that
prepare the installation device and even feasiable on non-linux systems
by using ext4 third party drivers.
Potential new threats: Since this enables sshd by default a
potential bug in openssh could lead to remote code execution. Openssh
has a very good track-record over the last 20 years, which makes it
far more likely that Linux itself would have a remote code execution
vulnerability. It is trusted by millions of servers on many operating
systems to be exposed to the internet by default.
Co-authored-by: Samuel Dionne-Riel <samuel@dionne-riel.com>
readd perl (used in shell scripts), rsync (needed for NixOps) and strace (common debugging tool)
they where previously removed in https://github.com/NixOS/nixpkgs/pull/91213
Co-authored-by: Timo Kaufmann <timokau@zoho.com>
Co-authored-by: 8573 <8573@users.noreply.github.com>
Use StateDirectory to create necessary directories and hardcode some
paths. Also drop file based audit logs, they can be found in the
journal. And add module option deprecation messages.
`sslCACert` was used for trust store of client and server certificates. Since `smtpd_tls_ask_ccert` defaults to no the setup of `smtpd_tls_CApath` was removed.
>By default (see smtpd_tls_ask_ccert), client certificates are not requested, and smtpd_tls_CApath should remain empty.
see http://www.postfix.org/postconf.5.html#smtpd_tls_CAfile
Keeping the VM state test across several run sometimes lead to subtle
and hard to spot errors in practice. We delete the VM state which
contains (among other things) the qcow volume.
We also introduce a -K (--keep-vm-state) flag making VM state to
persist after the test run. This flag makes test-driver.py to match
its previous behaviour.
Enhance the heuristics to make sure that a user doesn't accidentally
upgrade across two major versions of Nextcloud (e.g. from v17 to v19).
The original idea/discussion has been documented in the nixpkgs manual[1].
This includes the following changes:
* `nextcloud19` will be selected automatically when having a stateVersion
greater or equal than 20.09. For existing setups, the package has to
be selected manually to avoid accidental upgrades.
* When using `nextcloud18` or older, a warning will be thrown which recommends
upgrading to `nextcloud19`.
* Added a brief paragraph about `nextcloud19` in the NixOS 19.09 release
notes.
* Restart `phpfpm` if the Nextcloud-package (`cfg.package`) changes[2].
[1] https://nixos.org/nixos/manual/index.html#module-services-nextcloud-maintainer-info
[2] https://github.com/NixOS/nixpkgs/pull/89427#issuecomment-638885727
Specifying mailboxes as a list isn't a good approach since this makes it
impossible to override values. For backwards-compatibility, it's still
possible to declare a list of mailboxes, but a deprecation warning will
be shown.
Since cd1dedac67 systemd-networkd has it's
netlink socket created via a systemd.socket unit. One might think that
this doesn't make much sense since networkd is just going to create it's
own socket on startup anyway. The difference here is that we have
configuration-time control over things like socket buffer sizes vs
compile-time constants.
For larger setups where networkd has to create a lot of (virtual)
devices the default buffer size of currently 128MB is not enough.
A good example is a machine with >100 virtual interfaces (e.g.,
wireguard tunnels, VLANs, …) that all have to be brought up during
startup. The receive buffer size will spike due to all the generated
message from the new interfaces. Eventually some of the message will be
dropped since there is not enough (permitted) buffer space available.
By having networkd start through / with a netlink socket created by
systemd we can configure the `ReceiveBufferSize` parameter in the socket
options without recompiling networkd.
Since the actual memory requirements depend on hardware, timing, exact
configurations etc. it isn't currently possible to infer a good default
from within the NixOS module system. Administrators are advised to
monitor the logs of systemd-networkd for `rtnl: kernel receive buffer
overrun` spam and increase the memory as required.
Note: Increasing the ReceiveBufferSize doesn't allocate any memory. It
just increases the upper bound on the kernel side. The memory allocation
depends on the amount of messages that are queued on the kernel side of
the netlink socket.
udev gained native support to handle FIDO security tokens, so we don't
need a module which only added the now obsolete udev rules.
Fixes: https://github.com/NixOS/nixpkgs/issues/76482
This fixes the output of "hostname --fqdn" (previously the domain name
was not appended). Additionally it's now possible to use the FQDN.
This works by unconditionally adding two entries to /etc/hosts:
127.0.0.1 localhost
::1 localhost
These are the first two entries and therefore gethostbyaddr() will
always resolve "127.0.0.1" and "::1" back to "localhost" [0].
This works because nscd (or rather the nss-files module) returns the
first matching row from /etc/hosts (and ignores the rest).
The FQDN and hostname entries are appended later to /etc/hosts, e.g.:
127.0.0.2 nixos-unstable.test.tld nixos-unstable
::1 nixos-unstable.test.tld nixos-unstable
Note: We use 127.0.0.2 here to follow nss-myhostname (systemd) as close
as possible. This has the advantage that 127.0.0.2 can be resolved back
to the FQDN but also the drawback that applications that only listen to
127.0.0.1 (and not additionally ::1) cannot be reached via the FQDN.
If you would like this to work you can use the following configuration:
```nix
networking.hosts."127.0.0.1" = [
"${config.networking.hostName}.${config.networking.domain}"
config.networking.hostName
];
```
Therefore gethostbyname() resolves "nixos-unstable" to the FQDN
(canonical name): "nixos-unstable.test.tld".
Advantages over the previous behaviour:
- The FQDN will now also be resolved correctly (the entry was missing).
- E.g. the command "hostname --fqdn" will now work as expected.
Drawbacks:
- Overrides entries form the DNS (an issue if e.g. $FQDN should resolve
to the public IP address instead of 127.0.0.1)
- Note: This was already partly an issue as there's an entry for
$HOSTNAME (without the domain part) that resolves to
127.0.1.1 (!= 127.0.0.1).
- Unknown (could potentially cause other unexpected issues, but special
care was taken).
[0]: Some applications do apparently depend on this behaviour (see
c578924) and this is typically the expected behaviour.
Co-authored-by: Florian Klink <flokli@flokli.de>
The `network-link-${i.name}` units raced with other things trying to
configure the interface, or ran before the interface was available.
Instead of running our own set of shell scripts on boot, and hoping
they're executed at the right time, we can make use of udev to configure
the interface *while they appear*, by providing `.link` files in
/etc/systemd/network/*.link to set MACAddress and MTUBytes.
This doesn't require networkd to be enabled, and is populated properly
on non-networkd systems since
https://github.com/NixOS/nixpkgs/pull/82941.
This continues clean-up work done in
https://github.com/NixOS/nixpkgs/pull/85170 for the scripted networking
stack.
The only leftover part of the `network-link-${i.name}` unit (bringing
the interface up) is moved to the beginning of the
`network-addresses-${i.name}` unit.
Fixes: https://github.com/NixOS/nixpkgs/issues/74471
Closes: https://github.com/NixOS/nixpkgs/pull/87116
I hate the thing too even though I made it, and rather just get rid of
it. But we can't do that yet. In the meantime, this brings us more
inline with autoconf and will make it slightly easier for me to write a
pkg-config wrapper, which we need.
This follows upstreams change in documentation. While the `[DHCP]`
section might still work it is undocumented and we should probably not
be using it anymore. Users can just upgrade to the new option without
much hassle.
I had to create a bit of custom module deprecation code since the usual
approach doesn't support wildcards in the path.
Systemd upstream has deprecated CriticalConnection with v244 in favor of
KeepConnection as that seems to be more flexible:
The CriticalConnection= setting in .network files is now deprecated,
and replaced by a new KeepConfiguration= setting which allows more
detailed configuration of the IP configuration to keep in place.
Rework withExtensions / buildEnv to handle currently enabled
extensions better and make them compatible with override. They now
accept a function with the named arguments enabled and all, where
enabled is a list of currently enabled extensions and all is the set
of all extensions. This gives us several nice properties:
- You always get the right version of the list of currently enabled
extensions
- Invocations chain
- It works well with overridden PHP packages - you always get the
correct versions of extensions
As a contrived example of what's possible, you can add ImageMagick,
then override the version and disable fpm, then disable cgi, and
lastly remove the zip extension like this:
{ pkgs ? (import <nixpkgs>) {} }:
with pkgs;
let
phpWithImagick = php74.withExtensions ({ all, enabled }: enabled ++ [ all.imagick ]);
phpWithImagickWithoutFpm743 = phpWithImagick.override {
version = "7.4.3";
sha256 = "wVF7pJV4+y3MZMc6Ptx21PxQfEp6xjmYFYTMfTtMbRQ=";
fpmSupport = false;
};
phpWithImagickWithoutFpmZip743 = phpWithImagickWithoutFpm743.withExtensions (
{ enabled, all }:
lib.filter (e: e != all.zip) enabled);
phpWithImagickWithoutFpmZipCgi743 = phpWithImagickWithoutFpmZip743.override {
cgiSupport = false;
};
in
phpWithImagickWithoutFpmZipCgi743
It currently says that everything will be backward compatible between lego and simp-le certificates, but it’s not.
(cherry picked from commit 21c4a33cee)
According to my analysis the last critical fix went into v5.4.23, I have
confirmed this by running WebGL over night and haven't seen a single
i915 GPU hang. Lets remove the notes from the release notes.
(cherry picked from commit da764d22ce)
This is an backward incompatible change from upstream dhcpcd [0], as
this could have easily locked me out of my box.
As dhcpcd doesn't allow to use only a blacklist (denyinterfaces in
dhcpcd.conf) of devices and use all remaining devices, while explicitly
allowing some interfaces like bridges, I think the best option would be
to not change anything about it and just educate the users here about
that edge case and how to solve it.
[0] https://roy.marples.name/archives/dhcpcd-discuss/0002621.html
(cherry picked from commit eeeb2bf803)
Also removed `pkgs.hydra-flakes` since flake-support has been merged
into master[1]. Because of that, `pkgs.hydra-unstable` is now compiled
against `pkgs.nixFlakes` and currently requires a patch since Hydra's
master doesn't compile[2] atm.
[1] https://github.com/NixOS/hydra/pull/730
[2] https://github.com/NixOS/hydra/pull/732
Some changes might require manual migration steps:
"Due to changes to the way in which Gollum handles filenames, you may
have to change some links in your wiki when migrating from gollum 4.x.
See the release notes [0] for more details. You may find the
bin/gollum-migrate-tags script helpful to accomplish this. Also see the
--lenient-tag-lookup option for making tag lookup backwards compatible
with 4.x, though note that this will decrease performance on large wikis
with many tags." (source: [1])
[0]: https://github.com/gollum/gollum/wiki/5.0-release-notes
[1]: https://github.com/gollum/gollum/blob/v5.0.0/HISTORY.md
So now we have only packages for human interaction in php.packages and
only extensions in php.extensions. With this php.packages.exts have
been merged into the same attribute set as all the other extensions to
make it flat and nice.
The nextcloud module have been updated to reflect this change as well
as the documentation.
Upgrades Hydra to the latest master/flake branch. To perform this
upgrade, it's needed to do a non-trivial db-migration which provides a
massive performance-improvement[1].
The basic ideas behind multi-step upgrades of services between NixOS versions
have been gathered already[2]. For further context it's recommended to
read this first.
Basically, the following steps are needed:
* Upgrade to a non-breaking version of Hydra with the db-changes
(columns are still nullable here). If `system.stateVersion` is set to
something older than 20.03, the package will be selected
automatically, otherwise `pkgs.hydra-migration` needs to be used.
* Run `hydra-backfill-ids` on the server.
* Deploy either `pkgs.hydra-unstable` (for Hydra master) or
`pkgs.hydra-flakes` (for flakes-support) to activate the optimization.
The steps are also documented in the release-notes and in the module
using `warnings`.
`pkgs.hydra` has been removed as latest Hydra doesn't compile with
`pkgs.nixStable` and to ensure a graceful migration using the newly
introduced packages.
To verify the approach, a simple vm-test has been added which verifies
the migration steps.
[1] https://github.com/NixOS/hydra/pull/711
[2] https://github.com/NixOS/nixpkgs/pull/82353#issuecomment-598269471
