Previously, we hardcoded a 60 second timer to stop netdata if we didn't have any answer back.
This is wrong and can cause data loss because the SIGTERM sent by systemd can sometimes be not honored.
Which in turn becomes a SIGKILL, causing potential data loss / corruption.
Offer a flag to users and bump the deadline to 2 minutes.
* add sector size parameter to swap randomEncryption
* add key size parameter to swap randomEncryption
* allow deviceName to be overridden for encrypted swap
* create test for swap random encryption
* update release notes
Add a marker file to the python outputs that tells pip and other tooling
following PEP 668 that they should not be installing things system-wide.
This provides better feedback to the user and also potentially avoids issues in
single-user installs where the /nix/store is owned by the user.
For more details, see <https://peps.python.org/pep-0668/>
Here is how it currently looks like:
$ pip install requests
error: externally-managed-environment
× This environment is externally managed
╰─> This command has been disabled as it tries to modify the immutable
`/nix/store` filesystem.
To use Python with Nix and nixpkgs, have a look at the online documentation:
<https://nixos.org/manual/nixpkgs/stable/#python>.
This removes the feature preview warning, enable by default bootspec,
adds a validation flag to prevent Go to go into build-time closure.
This will break all downstream users of bootspec as those changes are
not backward-compatible.
* zplug: update the output path
This is a breaking change because the old behavior pollutes the nix profile root
dir with all files in https://github.com/zplug/zplug and needs to be fixed.
I created a corresponding PR in the home manager repo
https://github.com/nix-community/home-manager/pull/3922. For non HM users, they
will need to update their dependency on `${pkgs.zplug}/init.zsh` to `${pkgs.zplug}/share/zplug/init.zsh`.
* Only add necessary files to $out/share/zplug. Also add the zplug man pages
The LICENSE file is not in the 2.4.2 tag and there's not a release after that. I
would skip adding the license $out/licenses/zplug in this commit.
Reference: https://aur.archlinux.org/cgit/aur.git/tree/PKGBUILD?h=zplug
Switch to systemdb-hwdb to build the udev hwdb.bin, as "udevadm hwdb" is
deprecated. This fixes an issue where the order of conflicting keys is
not respected. The systemd-hwdb command creates a newer format (v3) of
hwdb.bin that respects the ordering of duplicate keys, with later
values replacing earlier occurrences.
A release note is included, as some mappings may be affected.
`make-disk-image` is a tool for creating VM images. It takes an argument
`contents` that allows one to specify files and directories that should
be copied into the VM image. However, directories end up not at the
specified target, but instead at a subdirectory of the target, with a
nix-store-like path, e.g.
`/target/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx-source`. See issue
https://github.com/NixOS/nixpkgs/issues/226203 .
This change adds a test for make-disk-image's contents directory
handling and adds a fix (appending `/` to rsync input directory names).
This closes issue https://github.com/NixOS/nixpkgs/issues/226203 .
After the introduction of structured settings in #208299 the old
string-style options / types which were kept for compatibility are now
removed in preparation for the 23.05 release.
When kubo is force killed with `pkill -KILL ipfs` or by systemd-oomd,
it doesn't unmount /ipfs and /ipns. That prevents it
from starting up the next time. So, unmount on postStop.
This is useful if your postgresql version is dependant on
`system.stateVersion` and not pinned down manually. Then it's not
necessary to find out which version exactly is in use and define
`package` manually, but just stay with what NixOS provides as default:
$ nix-instantiate -A postgresql
/nix/store/82fzmb77mz2b787dgj7mn4a8i4f6l6sn-postgresql-14.7.drv
$ nix-instantiate -A postgresql_jit
/nix/store/qsjkb72fcrrfpsszrwbsi9q9wgp39m50-postgresql-14.7.drv
$ nix-instantiate -A postgresql.withJIT
/nix/store/qsjkb72fcrrfpsszrwbsi9q9wgp39m50-postgresql-14.7.drv
$ nix-instantiate -A postgresql.withJIT.withoutJIT
/nix/store/82fzmb77mz2b787dgj7mn4a8i4f6l6sn-postgresql-14.7.drv
I.e. you can use postgresql with JIT (for complex queries only[1]) like
this:
services.postgresql = {
enable = true;
enableJIT = true;
};
Performing a new override instead of re-using the `_jit`-variants for
that has the nice property that overlays for the original package apply
to the JIT-enabled variant, i.e.
with import ./. {
overlays = [
(self: super: {
postgresql = super.postgresql.overrideAttrs (_: { fnord = "snens"; });
})
];
};
postgresql.withJIT.fnord
still gives the string `snens` whereas `postgresql_jit` doesn't have the
attribute `fnord` in its derivation.
[1] https://www.postgresql.org/docs/current/runtime-config-query.html#GUC-JIT-ABOVE-COST
Closes#150801
Note: I decided against resuming directly on #150801 because the
conflict was too big (and resolving it seemed too error-prone to me).
Also the `this`-refactoring could be done in an easier manner, i.e. by
exposing JIT attributes with the correct configuration. More on that
below.
This patch creates variants of the `postgresql*`-packages with JIT[1]
support. Please note that a lot of the work was derived from previous
patches filed by other contributors, namely dasJ, andir and abbradar,
hence the co-authored-by tags below.
Effectively, the following things have changed:
* For JIT variants an LLVM-backed stdenv with clang is now used as
suggested by dasJ[2]. We need LLVM and CLang[3] anyways to build the
JIT-part, so no need to mix this up with GCC's stdenv. Also, using the
`dev`-output of LLVM and clang's stdenv for building (and adding llvm
libs as build-inputs) seems more cross friendly to me (which will
become useful when cross-building for JIT-variants will actually be
supported).
* Plugins inherit the build flags from the Makefiles in
`$out/lib/pgxs/src` (e.g. `-Werror=unguarded-availability-new`). Since
some of the flags are clang-specific (and stem from the use of the
CLang stdenv) and don't work on gcc, the stdenv of `pkgs.postgresql`
is passed to the plugins. I.e., plugins for non-JIT variants are built
with a gcc stdenv on Linux and plugins for JIT variants with a clang
stdenv.
Since `plv8` hard-codes `gcc` as `$CC` in its Makefile[4], I marked it
as broken for JIT-variants of postgresql only.
* Added a test-matrix to confirm that JIT works fine on each
`pkgs.postgresql_*_jit` (thanks Andi for the original test in
#124804!).
* For each postgresql version, a new attribute
`postgresql_<version>_jit` (and a corresponding
`postgresqlPackages<version>JitPackages`) are now exposed for better
discoverability and prebuilt artifacts in the binary cache.
* In #150801 the `this`-argument was replaced by an internal recursion.
I decided against this approach because it'd blow up the diff even
more which makes the readability way harder and also harder to revert
this if necessary.
Instead, it is made sure that `this` always points to the correct
variant of `postgresql` and re-using that in an additional
`.override {}`-expression is trivial because the JIT-variant is
exposed in `all-packages.nix`.
* I think the changes are sufficiently big to actually add myself as
maintainer here.
* Added `libxcrypt` to `buildInputs` for versions <v13. While
building things with an LLVM stdenv, these versions complained that
the extern `crypt()` symbol can't be found. Not sure what this is
exactly about, but since we want to switch to libxcrypt for `crypt()`
usage anyways[5] I decided to add it. For >=13 it's not relevant
anymore anyways[6].
* JIT support doesn't work with cross-compilation. It is attempted to
build LLVM-bytecode (`%.bc` is the corresponding `make(1)`-rule) for
each sub-directory in `backend/` for the JIT apparently, but with a
$(CLANG) that can produce binaries for the build, not the host-platform.
I managed to get a cross-build with JIT support working with
`depsBuildBuild = [ llvmPackages.clang ] ++ buildInputs`, but
considering that the resulting LLVM IR isn't platform-independent this
doesn't give you much. In fact, I tried to test the result in a VM-test,
but as soon as JIT was used to optimize a query, postgres would
coredump with `Illegal instruction`.
A common concern of the original approach - with llvm as build input -
was the massive increase of closure size. With the new approach of using
the LLVM stdenv directly and patching out references to the clang drv in
`$out` the effective closure size changes are:
$ nix path-info -Sh $(nix-build -A postgresql_14)
/nix/store/kssxxqycwa3c7kmwmykwxqvspxxa6r1w-postgresql-14.7 306.4M
$ nix path-info -Sh $(nix-build -A postgresql_14_jit)
/nix/store/xc7qmgqrn4h5yr4vmdwy56gs4bmja9ym-postgresql-14.7 689.2M
Most of the increase in closure-size stems from the `lib`-output of
LLVM
$ nix path-info -Sh /nix/store/5r97sbs5j6mw7qnbg8nhnq1gad9973ap-llvm-11.1.0-lib
/nix/store/5r97sbs5j6mw7qnbg8nhnq1gad9973ap-llvm-11.1.0-lib 349.8M
which is why this shouldn't be enabled by default.
While this is quite much because of LLVM, it's still a massive
improvement over the simple approach of adding llvm/clang as
build-inputs and building with `--with-llvm`:
$ nix path-info -Sh $(nix-build -E '
with import ./. {};
postgresql.overrideAttrs ({ configureFlags ? [], buildInputs ? [], ... }: {
configureFlags = configureFlags ++ [ "--with-llvm" ];
buildInputs = buildInputs ++ [ llvm clang ];
})' -j0)
/nix/store/i3bd2r21c6c3428xb4gavjnplfqxn27p-postgresql-14.7 1.6G
Co-authored-by: Andreas Rammhold <andreas@rammhold.de>
Co-authored-by: Janne Heß <janne@hess.ooo>
Co-authored-by: Nikolay Amiantov <ab@fmap.me>
[1] https://www.postgresql.org/docs/current/jit-reason.html
[2] https://github.com/NixOS/nixpkgs/pull/124804#issuecomment-864616931
& https://github.com/NixOS/nixpkgs/pull/150801#issuecomment-1467868321
[3] This fails with the following error otherwise:
```
configure: error: clang not found, but required when compiling --with-llvm, specify with CLANG=
```
[4] https://github.com/plv8/plv8/blob/v3.1.5/Makefile#L14
[5] https://github.com/NixOS/nixpkgs/pull/181764
[6] c45643d618
`bridge` is used by iproute2, so using this name for protonmail-bridge
made it very likely to produce a name "conflict".
Also `bridge` is used in the Makefile by upstream project Makefile but
it apparently is renamed later on when packaged in rpm/deb so even for
coherence purposes it does make sense to revert it back to the name
`protonmail-bridge` that were previously being used.
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
The keyd package already exists, but without a systemd service.
Keyd requires write access to /var/run to create its socket. Currently
the directory it uses can be changed with an environment variable, but
the keyd repo state suggests that this may turn into a compile-time
option. with that set, and some supplementary groups added, we can run
the service under DynamicUser.
Co-authored-by: pennae <82953136+pennae@users.noreply.github.com>
The single option tries to do too much work, which just ends up confusing people.
So:
- don't force the console font, the kernel can figure this out as of #210205
- don't force the systemd-boot mode, it's an awkward mode that's not supported
on most things and will break flicker-free boot
- add a separate option for the xorg cursor scaling trick and move it under the xorg namespace
- add a general `fonts.optimizeForVeryHighDPI` option that explicitly says what it does
- alias the old option to that
- don't set any of those automatically in nixos-generate-config
- drop media-session (rip 💀)
- stop trying to let people override default configs, those never got merged correctly
- drop all the complexity arising from having to vendor default config files
- build docs in sandbox as we no longer recurse
This patch fixes two issues:
1. The file in which environment variables are set is inconsistent.
- This file sets them in zprofile when programs.zsh.enable is not
set.
- Zsh module sets them in zshenv when programs.zsh.enable is set.
2. Setting environment variables in zprofile overrides what users set
in .zshenv. See these[1] home-manager[2] issues[3].
/etc/profile is also changed to /etc/set-environment. Here is a
comparison:
Using /etc/profile:
- Pros
- config.environment.shellInit is sourced in all zsh
- Cons
- config.environment.loginShellInit is also sourced in non-login zsh
- config.programs.bash.shellInit is also sourced in all zsh
- config.programs.bash.loginShellInit is also sourced in all zsh
Using /etc/set-environment:
- Pros
- config.programs.bash.shellInit is not sourced in any zsh
- config.programs.bash.loginShellInit is not sourced in any zsh
- Cons
- config.environment.shellInit is not sourced in any zsh
- config.environment.loginShellInit is not sourced in any zsh
[1]: https://github.com/nix-community/home-manager/issues/2751#issuecomment-1048682643
[2]: https://github.com/nix-community/home-manager/issues/2991
[3]: https://github.com/nix-community/home-manager/issues/3681#issuecomment-1436054233
Effectively removes support for the following hashing algorithms
as announced in the NixOS 22.11 release notes:
- bcrypt_x ($2x$)
- sha256crypt ($5$)
- sha1crypt ($sha1$)
- sunmd5 ($md5$)
- md5crypt ($1$)
- nt ($3$)
- bdiscrypt (_)
- bigcrypt (:)
- descrypt (:)
And exposes the crypt scheme ids for enabled algorithms, so they can be
reused for validation in the users-groups module.
- Christmas is over!
- Upstream has changed the name of the target triplet used for the JS
backend from js-unknown-ghcjs to javascript-unknown-ghcjs, since Cabal
calls the architecture "javascript":
6636b67023
Since the triplet is made up anyways, i.e. autoconf does not support
it and Rust uses different triplets for its emscripten backends, we'll
just change it as well.
- Upstream fixed the problem with ar(1) being invoked incorrectly by stage0:
e987e345c8
systemd v253 changelog/NEWS:
https://github.com/systemd/systemd/blob/v253/NEWS
NixOS changes:
0007-hostnamed-localed-timedated-disable-methods-that-cha.patch was
dropped, because systemd gained support to handle read-only /etc.
*-add-rootprefix-to-lookup-dir-paths.patch required some updates too,
as src/basic/def.h moved to src/basic/constants.h.
systemd/systemd#25771 switched p11kit to become
dlopen()'ed, so we need to patch that path.
added a note to the 23.05 release notes to recommend `nixos-rebuild boot`
Co-authored-by: Florian Klink <flokli@flokli.de>
* k3s: add environmentFile option
Enabling to include secrets through configuration such as 'sops'
* Update nixos/doc/manual/release-notes/rl-2305.section.md
Co-authored-by: Jairo Llopis <973709+yajo@users.noreply.github.com>
Update protonmail-bridge to v3. This also rename the CLI executable from
protonmail-bridge to bridge to be more in line with upstream naming.
Co-authored-by: James Landrein <github@j4m3s.eu>
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@proton.ch>
Upstream has officially abandoned the project as of 2021 [0], there's been
no release since 2016, it uses the EoL Qt 4, and alternatives like
KeePassXC exist.
Also move KeePassXC to its own directory -- it doesn't make sense to
have it in KeePassX's folder anymore.
[0]: https://www.keepassx.org/index.html%3Fp=636.html
Provide a module to configure Coqui TTS, available as `tts` in nixpkgs
for a few releases already.
The module supports multiple servers in parallel, so multiple languages
and testing scenarios can be covered, without affecting any production
usage.
this adds support for structural includes to nixos-render-docs.
structural includes provide a way to denote the (sub)structure of the
nixos manual in the markdown source files, very similar to how we used
literal docbook blocks before, and are processed by nixos-render-docs
without involvement of xml tooling. this will ultimately allow us to
emit the nixos manual in other formats as well, e.g. html, without going
through docbook at all.
alternatives to this source layout were also considered:
a parallel structure using e.g. toml files that describe the document
tree and links to each part is possible, but much more complicated to
implement than the solution chosen here and makes it harder to follow
which files have what substructure. it also makes it much harder to
include a substructure in the middle of a file.
much the same goes for command-line arguments to the converter, only
that command-lined arguments are even harder to specify correctly and
cannot be reasonably pulled together from many places without involving
another layer of tooling. cli arguments would also mean that the manual
structure would be fixed in default.nix, which is also not ideal.
This patch provides input arguments `newuidmapPath` and `newgidmapPath`
for apptainer and singularity to specify the path to the SUID-ed executables
newuidmap and newgidmap where they are not available from the FHS PATH.
As NixOS places those suided executables in a non-FHS position
(/run/wrapper/bin), this patch provides
programs.singularity.enableFakeroot option and implement with the above
input parameters.
Upstream changes:
singularity 3.8.7 (the legacy) -> apptainer 1.1.3 (the renamed) / singularity 3.10.4 (Sylabs's fork)
Build process:
* Share between different sources
* Fix the sed regexp to make defaultPath patch work
* allowGoReference is now true
* Provied input parameter removeCompat (default to false)
that removes the compatible "*singularity*" symbolic links
and related autocompletion files when projectName != "singularity"
* Change localstatedir to /var/lib
* Format with nixpkgs-fmt
* Fix the defaultPath patching
and use it instead of the `<executable> path` config directive
deprecated in Apptainer
* Provide dependencies for new functionalities such as
squashfuse (unprivileged squashfs mount)
* Provide an attribute `defaultPathInputs` to override
prefix of container runtime default PATH
NixOS module programs.singularity:
* Allow users to specify packages
* Place related directories to /var/lib
* Format with nixpkgs-fmt
singularity-tools:
* Allow users to specify packages
* Place related directories to /var/lib when building images in VM
This commit changes from a precompiled bundle to
a source file. Accordingly, the expression file is renamed to `default.nix`
and the old attribute name is changed to `tvbrowser`, the old one being now a
throw-message.
The upstream build script tries to download the news plugin; so, we provide
this and pass it as a parameter.
Given that this is still a piece of a precompiled Java bytecode, along with a
main readable source bundle, `meta.sourceProvenance` is updated accordingly.
As announced in the NixOS 22.11 release notes, 23.05 will switch NixOS
to using nsncd (a non-caching reimplementation in Rust) as NSS lookup
dispatcher, instead of the buggy and deprecated glibc-provided nscd.
If you need to switch back, set `services.nscd.enableNsncd = false`, but
please open an issue in nixpkgs so your issue can be fixed.
...for explicitly named network interfaces
This reverts commit 6ae3e7695e.
(and evaluation fixups 08d26bbb727aed90a969)
Some of the tests fail or time out after the merge.
Wordpress bundles some non-essential plugins and themes, then pesters
users to upgrade them. As we make the whole webroot readonly, it is
not possible to trivially delete them. Instead we should have users
explicitly install plugins via the existing nixos module.
In an effort to better encode version strings and use descriptive pnames
that do not conflict with top level pkgs, we currently use
wordpress-${type}-${pname} for pname. This is good for the nix store,
but when we synthesize the wordpress derivation in our module, we reuse
this pname for the output directory.
Internally wordpress can handle this fine, since plugins must register
via php, not directory. Unfortunately, many plugins like civicrm and
wpforms-lite are designed to rely upon the name of their install
directory for homing or discovery.
As such, we should follow both the upstream convention and
services.nextcloud.extraApps and use an attribute set for these options.
This allows us to not have to deal with the implementation details of
plugins and themes, which differ from official and third party, but also
give users the option to override the install location. The only issue
is that it breaks the current api.
